摘要
In Bangladesh, there are thousands of textile-dying industries spread across the country’s many regions, the majority of which involve knitting and dying. The dyeing industry uses an enormous quantity of water, as well as colors and chemicals. After the dying process has been completed, they also release a significant amount of wastewater. Cotton, wool, and polyester fiber are typically dyed with textile dyes such as reactive, acid, and disperse dyes. These dyes are utilized most frequently in the respective sectors. The dyes’ colorants are extremely poisonous and dangerous to all forms of life, including aquatic life and living things. The present work has been intended to investigate whether or not it is practicable to remove commonly used textile dyes simultaneously from an aqueous dye solution using an adsorption technique that makes use of a variety of different adsorbents. This study focuses on the removal of color from two distinct types of dyes—Methylene Blue and Reactive Blue-250 which are cationic and anionic in nature respectively, using two different types of activated carbon adsorbents prepared from sawdust and fish scale. Dye removal capacity was tested as a function of contact time, the dosage of the adsorbent, pH during the treatment process, temperature and initial concentration of dye. The applicability of the Langmuir and Freundlich adsorption isotherms in describing experimental data was investigated. The micro and mesoporous activated carbon prepared from sawdust and fish scale identified by Scanning Electron Microscopy (SEM) images indicated that such adsorbents with a large surface area have more dye adsorption potential whereas the variation in dye adsorption occurs due to variation in surface area. From the overall experimental data, maximum removal of 95.39% and 87.92% was found for Methylene Blue and Reactive Blue-250 respectively by sawdust, and 90.64% removal of Methylene Blue by using fish scale.
In Bangladesh, there are thousands of textile-dying industries spread across the country’s many regions, the majority of which involve knitting and dying. The dyeing industry uses an enormous quantity of water, as well as colors and chemicals. After the dying process has been completed, they also release a significant amount of wastewater. Cotton, wool, and polyester fiber are typically dyed with textile dyes such as reactive, acid, and disperse dyes. These dyes are utilized most frequently in the respective sectors. The dyes’ colorants are extremely poisonous and dangerous to all forms of life, including aquatic life and living things. The present work has been intended to investigate whether or not it is practicable to remove commonly used textile dyes simultaneously from an aqueous dye solution using an adsorption technique that makes use of a variety of different adsorbents. This study focuses on the removal of color from two distinct types of dyes—Methylene Blue and Reactive Blue-250 which are cationic and anionic in nature respectively, using two different types of activated carbon adsorbents prepared from sawdust and fish scale. Dye removal capacity was tested as a function of contact time, the dosage of the adsorbent, pH during the treatment process, temperature and initial concentration of dye. The applicability of the Langmuir and Freundlich adsorption isotherms in describing experimental data was investigated. The micro and mesoporous activated carbon prepared from sawdust and fish scale identified by Scanning Electron Microscopy (SEM) images indicated that such adsorbents with a large surface area have more dye adsorption potential whereas the variation in dye adsorption occurs due to variation in surface area. From the overall experimental data, maximum removal of 95.39% and 87.92% was found for Methylene Blue and Reactive Blue-250 respectively by sawdust, and 90.64% removal of Methylene Blue by using fish scale.
