摘要
AAS was qualified as per pharmacopoeia requirements. Copper, manganese, mercury and cadmium hallow cathode lamps were used for qualification purposes. Design qualification and installation qualification met the criteria of user requirements. Wavelength accuracy and reproducibility, resolution and baseline stability are in compliance with user requirements. Characteristics concentration or sensitivity, detection limit and characteristics mass were performed as a part of operational qualification which is 0.062 μg/mL, 0.00354 μg/mL, 1.41 pg respectively. Results of % RSD for precision study is 0.352 and 0.487 for flame and graphite furnace mode respectively fulfilled criteria of qualification. Performance qualification results of 20 consecutive days demonstrate the predetermined specification. Analytical instrument qualification and method validation relationship is also described by assay performed on haemodialysis concentrate. Good precision (2) greater than 0.9997 for potassium, magnesium and calcium linear curves, lower detection limits for all three ingredients and robust assay data as a part of validation studies conform the qualified AAS for its intended application.
AAS was qualified as per pharmacopoeia requirements. Copper, manganese, mercury and cadmium hallow cathode lamps were used for qualification purposes. Design qualification and installation qualification met the criteria of user requirements. Wavelength accuracy and reproducibility, resolution and baseline stability are in compliance with user requirements. Characteristics concentration or sensitivity, detection limit and characteristics mass were performed as a part of operational qualification which is 0.062 μg/mL, 0.00354 μg/mL, 1.41 pg respectively. Results of % RSD for precision study is 0.352 and 0.487 for flame and graphite furnace mode respectively fulfilled criteria of qualification. Performance qualification results of 20 consecutive days demonstrate the predetermined specification. Analytical instrument qualification and method validation relationship is also described by assay performed on haemodialysis concentrate. Good precision (2) greater than 0.9997 for potassium, magnesium and calcium linear curves, lower detection limits for all three ingredients and robust assay data as a part of validation studies conform the qualified AAS for its intended application.
