期刊文献+

Heat Treatment Effect on Microstructure and Mechanical Properties of Re-Containing Inconel 718 Alloy

Heat Treatment Effect on Microstructure and Mechanical Properties of Re-Containing Inconel 718 Alloy
下载PDF
导出
摘要 The effect of Rhenium additions to the standard Inconel 718 (ST IN718) alloy as well as solution and aging treatments on microstructure and hardness property were studied. The microstructure of Re-containing alloys has higher volume fraction of δ phase than standard alloy. Conventional solution treatment (CST) at 1273 K for 1h precipitates a thin film of δ phase at the grain boundaries as well as needle-like in γ matrix;however, after modified solution at 1440 K for 3 h long, both types of δ phase precipitates entirely vanish from the microstructure. Small colonies of needle-like δ phase start to appear with aging at 1023 K for 4 h, after CST. Prolonging the aging time to 50 h, these colonies enlarge in size and spread in the matrix. XRD and TEM observations were used to identify the precipitation of hard γ” and γ’ phases. The changing in hardness measurements were evidence about the precipitation of these hard phases. CST have higher rate to increase in hardness with aging time comparing to modified solution specimens. The effect of Rhenium additions to the standard Inconel 718 (ST IN718) alloy as well as solution and aging treatments on microstructure and hardness property were studied. The microstructure of Re-containing alloys has higher volume fraction of δ phase than standard alloy. Conventional solution treatment (CST) at 1273 K for 1h precipitates a thin film of δ phase at the grain boundaries as well as needle-like in γ matrix;however, after modified solution at 1440 K for 3 h long, both types of δ phase precipitates entirely vanish from the microstructure. Small colonies of needle-like δ phase start to appear with aging at 1023 K for 4 h, after CST. Prolonging the aging time to 50 h, these colonies enlarge in size and spread in the matrix. XRD and TEM observations were used to identify the precipitation of hard γ” and γ’ phases. The changing in hardness measurements were evidence about the precipitation of these hard phases. CST have higher rate to increase in hardness with aging time comparing to modified solution specimens.
出处 《Journal of Minerals and Materials Characterization and Engineering》 2012年第9期924-930,共7页 矿物质和材料特性和工程(英文)
关键词 Standard INCONEL 718 RHENIUM Solution and Aging TREATMENTS Laves and Delta PHASES HARDNESS Property Standard Inconel 718 Rhenium Solution and Aging treatments Laves and Delta phases Hardness Property
  • 相关文献

参考文献1

二级参考文献9

  • 1COZER R, PINEAU A. Morphology of γ and γ" precipitates and thermal stability of Inconel 718 type alloys[J]. Metall Trans, 1973, 4A(1), 47-58.
  • 2GOBBIS, LI Z, NORRIS J, et al. High power COz and Nd-YAG pulsed laser welding of wrought Ineonel 718[J]. Journal of Mate- rial Processing Technology, 1996, 56(1-4): 333-345.
  • 3CESCHINI L, CAMMAROTA G P, GARGNENI G L, et al.Super plastic behavior of fine-grained IN-718 superalloy[J] . Ma terials Science Forum, 1994, 170- 172: 351-356.
  • 4RADAVICH J F, FORT A. Superalloys 718, 625, 706 and Vari- ous Derivatives[C]. Warrendale: The Mineral, Metals and Mate- rials Society, 1994. 635-636.
  • 5HE J H, FUKUYAMA S, YOKOGAWA K. Boundary in γ" pre- cipitate in Inconel 718 nickel-base superalloy[J]. Acta Metallurgi- ca et Materialia, 1995, 43(12) : 4403-4409.
  • 6REN C Q, LIU D X, BAI Z Q, et al. Corrosion behavior of oil tube steel in stimulant solution with hydrogen sulfide and carbon dioxide[J]. Materials Chemistry and Physics, 2005, 93, (2- 3): 305-309.
  • 7曲凤盛,卢振,张凯锋,李保永.热处理工艺对Inconel718合金多层夹芯板结构的微观组织与力学性能的影响[J].材料工程,2011,39(4):1-8. 被引量:2
  • 8鲜思干,黄福良.川东气田油管腐蚀及对策[J].钻采工艺,1994,17(2):38-43. 被引量:9
  • 9冯星安,黄柏宗,高光第.对四川罗家寨气田高含CO_2、H_2S腐蚀的分析及防腐设计初探[J].石油工程建设,2004,30(1):10-14. 被引量:36

共引文献30

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部