摘要
Micro molybdenum disulfide was prepared with one-step hydrothermal method;the influence of reactant concentration and temperature on the surface ratio of micro-MoS2 grain was investigated. Raman spectroscopy (Raman), X-ray diffraction (XRD), and Scanning electron microscopy (SEM) were used to characterize the structure, composition and morphology of MoS2. The results show that micro-MoS2 grains were synthesized with one-step hydrothermal synthesis, and the morphology of micro-MoS2 grains is like flower and sphere. The SEM figures indicate that the surface ratio of micro-MoS2 grains is different and also show that the surface ratio of micro-MoS2 grains can be improved by regulating reactant concentration and temperature. This research showed a method to improve the surface ratio of micro-MoS2 grains.
Micro molybdenum disulfide was prepared with one-step hydrothermal method;the influence of reactant concentration and temperature on the surface ratio of micro-MoS2 grain was investigated. Raman spectroscopy (Raman), X-ray diffraction (XRD), and Scanning electron microscopy (SEM) were used to characterize the structure, composition and morphology of MoS2. The results show that micro-MoS2 grains were synthesized with one-step hydrothermal synthesis, and the morphology of micro-MoS2 grains is like flower and sphere. The SEM figures indicate that the surface ratio of micro-MoS2 grains is different and also show that the surface ratio of micro-MoS2 grains can be improved by regulating reactant concentration and temperature. This research showed a method to improve the surface ratio of micro-MoS2 grains.