摘要
In the present study, physico-chemical investigations have been carried out on the possibility of using Cameroonian volcanic or clay pozzolans as raw material for geopolymer or pozzolanic binder. The research had made some suggestive results and conclusions. Powders of less than 100 μm of five sampled pozzolans from volcanic or clay origins have been subjected to chemical and mineralogical analysis, BET specific surface, absolute density, granulometry and pozzolanic activity in solution tests. The results obtained showed that, geopolymers or pozzolanic binders can be produced from samples studied. The samples contain significant amounts of glassy or amorphous phase ready to dissolve in an alkaline solution. The high alkali content of volcanic pozzolans makes them more appropriate for geopolymer application. Clay pozzolans are the easier to grind in order to obtain the appropriate fineness and can be used for both geo- polymers and pozzolanic binders.
In the present study, physico-chemical investigations have been carried out on the possibility of using Cameroonian volcanic or clay pozzolans as raw material for geopolymer or pozzolanic binder. The research had made some suggestive results and conclusions. Powders of less than 100 μm of five sampled pozzolans from volcanic or clay origins have been subjected to chemical and mineralogical analysis, BET specific surface, absolute density, granulometry and pozzolanic activity in solution tests. The results obtained showed that, geopolymers or pozzolanic binders can be produced from samples studied. The samples contain significant amounts of glassy or amorphous phase ready to dissolve in an alkaline solution. The high alkali content of volcanic pozzolans makes them more appropriate for geopolymer application. Clay pozzolans are the easier to grind in order to obtain the appropriate fineness and can be used for both geo- polymers and pozzolanic binders.
