期刊文献+

A New Type of Strong Metal-Support Interaction Caused by Antimony Species

A New Type of Strong Metal-Support Interaction Caused by Antimony Species
下载PDF
导出
摘要 Interactions between metals and supports are of fundamental interest in heterogeneous catalysis, Noble metal particles supported on transition metal oxides (TMO) may undergo a so-called strong metal-support interaction via encapsulation. This perspective addresses catalytic properties of the metal catalysts in the SMSI state which can be explained on the basis of complementary studies. The electronic geometric and bifunctional effects originating from strong metal-support interactions (SMSI) that are responsible for the catalyst’s activity, selectivity, and stability are key factors that determine performance. A series of Pd-Sb supported on different metal oxide (<em>i.e.</em> SiO<sub>2</sub>, <em>γ</em>-Al<sub>2</sub>O<sub>3</sub>, TiO<sub>2</sub>, and ZrO<sub>2</sub>) were prepared by the impregnation method. The catalysts were characterized by N<sub>2</sub> adsorption (BET-SA and pore size distribution), TEM (transmission electron microscope), TPR (temperature-programmed reduction), CO-chemisorption, the structural characterization of Pd (dispersity, surface area), interaction between Pd and Sb<sub>2</sub>O<sub>3</sub> and also the influence of the nature of the support were investigated. SiO<sub>2</sub> supported Pd catalyst exhibited the highest surface area (192.6 m<sup>2</sup>/g) and pore volume (0.542 cm<sup>3</sup>/g) compared to the other supported oxides catalysts. The electron micrographs of these catalysts showed a narrow size particle distribution of Pd, but with varying sizes which in the range from 1 to 10 nm, depending on the type of support used. The results show almost completely suppressed of CO chemisorption when the catalysts were subjected to high temperature reduction (HTR), this suppression was overcome by oxidation of a reduced Pd/MeOx catalysts followed by re-reduction in hydrogen at 453 K low temperature reduction (LTR), almost completely restored the normal chemisorptive properties of the catalysts, this suppression was attributed by SbOx species by a typical SMSI effect as known for other reducible supports such as TiO<sub>2</sub>, ZrO<sub>2</sub>, CeO<sub>2</sub>, and Nb<sub>2</sub>O<sub>5</sub>. Interactions between metals and supports are of fundamental interest in heterogeneous catalysis, Noble metal particles supported on transition metal oxides (TMO) may undergo a so-called strong metal-support interaction via encapsulation. This perspective addresses catalytic properties of the metal catalysts in the SMSI state which can be explained on the basis of complementary studies. The electronic geometric and bifunctional effects originating from strong metal-support interactions (SMSI) that are responsible for the catalyst’s activity, selectivity, and stability are key factors that determine performance. A series of Pd-Sb supported on different metal oxide (<em>i.e.</em> SiO<sub>2</sub>, <em>γ</em>-Al<sub>2</sub>O<sub>3</sub>, TiO<sub>2</sub>, and ZrO<sub>2</sub>) were prepared by the impregnation method. The catalysts were characterized by N<sub>2</sub> adsorption (BET-SA and pore size distribution), TEM (transmission electron microscope), TPR (temperature-programmed reduction), CO-chemisorption, the structural characterization of Pd (dispersity, surface area), interaction between Pd and Sb<sub>2</sub>O<sub>3</sub> and also the influence of the nature of the support were investigated. SiO<sub>2</sub> supported Pd catalyst exhibited the highest surface area (192.6 m<sup>2</sup>/g) and pore volume (0.542 cm<sup>3</sup>/g) compared to the other supported oxides catalysts. The electron micrographs of these catalysts showed a narrow size particle distribution of Pd, but with varying sizes which in the range from 1 to 10 nm, depending on the type of support used. The results show almost completely suppressed of CO chemisorption when the catalysts were subjected to high temperature reduction (HTR), this suppression was overcome by oxidation of a reduced Pd/MeOx catalysts followed by re-reduction in hydrogen at 453 K low temperature reduction (LTR), almost completely restored the normal chemisorptive properties of the catalysts, this suppression was attributed by SbOx species by a typical SMSI effect as known for other reducible supports such as TiO<sub>2</sub>, ZrO<sub>2</sub>, CeO<sub>2</sub>, and Nb<sub>2</sub>O<sub>5</sub>.
作者 A. Benhmid K. El Ttaib K. Edbey V. N. Kalevaru B. Lücke A. Benhmid;K. El Ttaib;K. Edbey;V. N. Kalevaru;B. Lücke(Chemistry Department, Benghazi University, Benghazi, Libya;Leibniz Institute für Katalyse e.V. an der Universitat Rostock, Rostock, Germany)
出处 《Open Journal of Metal》 2020年第2期17-33,共17页 金属学报(美国)
关键词 BET-SA and Pore Size Distribution TEM SMSI Effect Metal Oxide Supports TPR CO-Chemisorption SbOx Species BET-SA and Pore Size Distribution TEM SMSI Effect Metal Oxide Supports TPR CO-Chemisorption SbOx Species
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部