期刊文献+

Estimation of Tree Height and Forest Biomass Using Airborne LiDAR Data: A Case Study of Londiani Forest Block in the Mau Complex, Kenya

Estimation of Tree Height and Forest Biomass Using Airborne LiDAR Data: A Case Study of Londiani Forest Block in the Mau Complex, Kenya
下载PDF
导出
摘要 Tactical decisions on natural resource management require accurate and up to date spatial information for sustainable forest management. Remote sensing devices by the use of multispectral data obtained from satellites or airborne sensors, allow substantial data acquisition that reduce cost of data collection and satisfy demands for continuous precise data. Forest height and Diameter at Breast Height (DBH) are crucial variables to predict volume and biomass. Traditional methods for estimation of tree heights and biomass are time consuming and labour intensive making it difficult for countries to carry out periodic National forest inventories to support forest management and REDD+ activities. This study assessed the applicability of LiDAR data in estimating tree height and biomass in a variety of forest conditions in Londiani Forest Block. The target forests were natural forest, plantation forests and other scattered forests analysed in a variety of topographic conditions. LiDAR data were collected by an aircraft flying at an elevation of 1550 m. The LIDAR pulses hitting the forest were used to estimate the forest height and the density of the vegetation, which implied biomass. LiDAR data were collected in 78 sampling plots of 15 m radius. The LiDAR data were ground truthed to compare its accuracy for above ground biomass (AGB) and height estimation. The correlation coefficients for heights between LiDAR and field data were 0.92 for the pooled data, 0.79 in natural forest, 0.95 in plantation forest and 0.92 in other scattered forest. AGB estimated from LiDAR and ground truthed data had a correlation coefficient of 0.86 for the pooled data, 0.78 in natural forest, 0.84 in plantation forest and 0.51 in other scattered forests. This implied 62%, 84% and 89% accuracy of AGB estimation in natural forests, other scattered forests and plantation forests respectively. The even aged conditions of plantation forests might have resulted to better estimates of height and AGB as compared to uneven aged natural forests and scattered forests. The results imply the reliability of using Airborne LIDAR scanning in forest biomass estimates in Kenya and are an option for supporting a National Forest Monitoring System for REDD+. Tactical decisions on natural resource management require accurate and up to date spatial information for sustainable forest management. Remote sensing devices by the use of multispectral data obtained from satellites or airborne sensors, allow substantial data acquisition that reduce cost of data collection and satisfy demands for continuous precise data. Forest height and Diameter at Breast Height (DBH) are crucial variables to predict volume and biomass. Traditional methods for estimation of tree heights and biomass are time consuming and labour intensive making it difficult for countries to carry out periodic National forest inventories to support forest management and REDD+ activities. This study assessed the applicability of LiDAR data in estimating tree height and biomass in a variety of forest conditions in Londiani Forest Block. The target forests were natural forest, plantation forests and other scattered forests analysed in a variety of topographic conditions. LiDAR data were collected by an aircraft flying at an elevation of 1550 m. The LIDAR pulses hitting the forest were used to estimate the forest height and the density of the vegetation, which implied biomass. LiDAR data were collected in 78 sampling plots of 15 m radius. The LiDAR data were ground truthed to compare its accuracy for above ground biomass (AGB) and height estimation. The correlation coefficients for heights between LiDAR and field data were 0.92 for the pooled data, 0.79 in natural forest, 0.95 in plantation forest and 0.92 in other scattered forest. AGB estimated from LiDAR and ground truthed data had a correlation coefficient of 0.86 for the pooled data, 0.78 in natural forest, 0.84 in plantation forest and 0.51 in other scattered forests. This implied 62%, 84% and 89% accuracy of AGB estimation in natural forests, other scattered forests and plantation forests respectively. The even aged conditions of plantation forests might have resulted to better estimates of height and AGB as compared to uneven aged natural forests and scattered forests. The results imply the reliability of using Airborne LIDAR scanning in forest biomass estimates in Kenya and are an option for supporting a National Forest Monitoring System for REDD+.
出处 《Open Journal of Forestry》 2017年第2期255-269,共15页 林学期刊(英文)
关键词 LIDAR HEIGHT BIOMASS Relationship Correlation LiDAR Height Biomass Relationship Correlation
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部