期刊文献+

The Interpretation of Underground Water Physical Parameters of Housing in the Region of Asahan Indah Palm Oil Factory Area Rokan Hulu District

The Interpretation of Underground Water Physical Parameters of Housing in the Region of Asahan Indah Palm Oil Factory Area Rokan Hulu District
下载PDF
导出
摘要 The research has been conducted to analyze the distribution of underground water physical parameters of the housing around Asahan Indah palm oil factory area Rokan Hulu District with radial method within ±300 meters radius from the factory location. The levels of underground water physical parameters include conductivity, resistivity, and salinity measured based on coordinate points amounted of 50 points. The data obtained from the measurement results were then inputted into “surfer 11” software to be processed in order to obtain the contour map of underground water physical parameters level. The results of this research indicated that the highest conductivity level came from the ring well type with 5 meter depth;it was 0.0964 (1/ohm·m) exceeded the standard threshold of underground water quality standard and the lowest conductivity was 0.00342 (1/ohm·m) which came from a ring well type with 10 meter depth. The lowest resistivity level was 10.37 ohm·m which came from the ring well type with 5 meter depth and the highest was 292.4 ohm·m which came from the ring well with 10 meter depth. The highest salinity level was 448 mg/l which exceeded the baseline threshold of underground water quality which came from the ring well type with 5 meter depth and the lowest was 175 mg/l from the ring well with 10 meter depth. The results of this research found that underground water in wells with 5 meters depth has been polluted with palm oil waste and at the depth of 10 meters, it has not been contaminated. The research has been conducted to analyze the distribution of underground water physical parameters of the housing around Asahan Indah palm oil factory area Rokan Hulu District with radial method within ±300 meters radius from the factory location. The levels of underground water physical parameters include conductivity, resistivity, and salinity measured based on coordinate points amounted of 50 points. The data obtained from the measurement results were then inputted into “surfer 11” software to be processed in order to obtain the contour map of underground water physical parameters level. The results of this research indicated that the highest conductivity level came from the ring well type with 5 meter depth;it was 0.0964 (1/ohm·m) exceeded the standard threshold of underground water quality standard and the lowest conductivity was 0.00342 (1/ohm·m) which came from a ring well type with 10 meter depth. The lowest resistivity level was 10.37 ohm·m which came from the ring well type with 5 meter depth and the highest was 292.4 ohm·m which came from the ring well with 10 meter depth. The highest salinity level was 448 mg/l which exceeded the baseline threshold of underground water quality which came from the ring well type with 5 meter depth and the lowest was 175 mg/l from the ring well with 10 meter depth. The results of this research found that underground water in wells with 5 meters depth has been polluted with palm oil waste and at the depth of 10 meters, it has not been contaminated.
作者 M. Juandi
出处 《Open Journal of Modern Hydrology》 2018年第4期119-125,共7页 现代水文学期刊(英文)
关键词 Conductivity RESISTIVITY SALINITY PALM FACTORY Waste Underground Water Conductivity Resistivity Salinity Palm Factory Waste Underground Water
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部