摘要
In order to harness wind energy with high coefficients, horizontal axis wind turbines (HAWT), like propeller-type wind turbines, have an advantage in terms of practical utilization because of their scale merit. However, large size and high tip-speed ratio are inherently related to material strength problems and low frequency noise emissions to the environment. In contrast to HAWT, we will discuss a flapping-type turbine driven at low speed. The flapping turbine works using lift force like the HAWT, but employs a new wind turbine concept in the present report. The concept involves the unique flapping motion of a wind blade mounted on a Chebyshev-dyad linkage by which the wing transforms wind energy into mechanical rotation. Both static and dynamic numerical estimates are developed to optimize all fundamental parameters of this linkage in order to obtain the desired torque. In this paper, the results of primitive optimization for determining the fundamental characteristics of motion and the trajectory of the wind turbine blade are demonstrated in order to obtain smooth rotation of the generator-driving shaft. It is also shown that the present turbine can be driven at low speed with a suitable energy conversion rate. Moreover, the practicality of operating slow flapping-type wind turbines is demonstrated, focusing on usage near residential areas or, e.g., on rooftops owing to lower noise. The feasibility of “figure eight” trajectory diversity is discussed along with geometrical parameters. Assuming one-blade motion with a variable trajectory for optimization, the smooth motion and required torque at slow rotation speeds are studied.
In order to harness wind energy with high coefficients, horizontal axis wind turbines (HAWT), like propeller-type wind turbines, have an advantage in terms of practical utilization because of their scale merit. However, large size and high tip-speed ratio are inherently related to material strength problems and low frequency noise emissions to the environment. In contrast to HAWT, we will discuss a flapping-type turbine driven at low speed. The flapping turbine works using lift force like the HAWT, but employs a new wind turbine concept in the present report. The concept involves the unique flapping motion of a wind blade mounted on a Chebyshev-dyad linkage by which the wing transforms wind energy into mechanical rotation. Both static and dynamic numerical estimates are developed to optimize all fundamental parameters of this linkage in order to obtain the desired torque. In this paper, the results of primitive optimization for determining the fundamental characteristics of motion and the trajectory of the wind turbine blade are demonstrated in order to obtain smooth rotation of the generator-driving shaft. It is also shown that the present turbine can be driven at low speed with a suitable energy conversion rate. Moreover, the practicality of operating slow flapping-type wind turbines is demonstrated, focusing on usage near residential areas or, e.g., on rooftops owing to lower noise. The feasibility of “figure eight” trajectory diversity is discussed along with geometrical parameters. Assuming one-blade motion with a variable trajectory for optimization, the smooth motion and required torque at slow rotation speeds are studied.
