期刊文献+

Ultrasonic Inspection System Using a Long Waveguide with an Acoustic Horn for High-Temperature Structure

Ultrasonic Inspection System Using a Long Waveguide with an Acoustic Horn for High-Temperature Structure
下载PDF
导出
摘要 The nondestructive inspection of a high temperature structure is required in order to guarantee its safety. However, there are no useful sensors for high temperature structures. Some of them cannot work at temperatures over 50°C. Another concern is that they are too expensive to use. A sensing system, which can transmit and receive an ultrasonic wave that travels a long distance using a long waveguide, has been studied. We confirmed that the optimal guided ultrasonic wave could travel more than 10 m using an electromagnetic transducer (EMAT) with a thin Ni-sheet surrounded on the surface of the bar and a 2-mm diameter bar as the waveguide. However, we had the difficult problem of receiving the reflected ultrasonic wave from the inside of a test specimen. We tried to improve the trial inspection system using an acoustic horn. An experiment in which the temperature of the test block was heated to about 500°C has now been completed. Finally, the condition of the bend in the waveguide to pass without reflection was confirmed. The nondestructive inspection of a high temperature structure is required in order to guarantee its safety. However, there are no useful sensors for high temperature structures. Some of them cannot work at temperatures over 50°C. Another concern is that they are too expensive to use. A sensing system, which can transmit and receive an ultrasonic wave that travels a long distance using a long waveguide, has been studied. We confirmed that the optimal guided ultrasonic wave could travel more than 10 m using an electromagnetic transducer (EMAT) with a thin Ni-sheet surrounded on the surface of the bar and a 2-mm diameter bar as the waveguide. However, we had the difficult problem of receiving the reflected ultrasonic wave from the inside of a test specimen. We tried to improve the trial inspection system using an acoustic horn. An experiment in which the temperature of the test block was heated to about 500°C has now been completed. Finally, the condition of the bend in the waveguide to pass without reflection was confirmed.
出处 《Journal of Sensor Technology》 2014年第4期177-185,共9页 传感技术(英文)
关键词 GUIDE WAVE WAVEGUIDE ACOUSTIC HORN NDI Thickness Measurement Guide Wave Waveguide Acoustic Horn NDI Thickness Measurement
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部