期刊文献+

Reconfiguration Cost Analysis Based on PetriNet for Manufacturing System

Reconfiguration Cost Analysis Based on PetriNet for Manufacturing System
下载PDF
导出
摘要 Nowadays, manufacturers are faced with severe challenges to response rapidly to changing demands and meet various customers’ needs with respect to production volume and product profile. Reconfigurable manufacturing paradigm was proposed as an advanced manufacturing philosophy to enhance the adaptability and flexibility of manufacturing sys-tems. By physical and logical reconfiguration, Reconfigurable Manufacturing System (RMS) is able to fulfil customers’ needs in a cost-effective way by making full use of the resources currently available. This paper focuses on studying of reconfiguration cost of such systems. In this paper, DEDS modelling method Petri Net is used to construct the model for reconfiguration process of RMS which includes physical reconfiguration cost factors and conjunction matrix is used to describe the production processes. By highlighting the differences in the process set before and after reconfiguration, the reconfiguration principles have been proposed to describe and guide the process of the manufacturing system re-configuration. The simulation example is given to prove the validation of the proposed model. Nowadays, manufacturers are faced with severe challenges to response rapidly to changing demands and meet various customers’ needs with respect to production volume and product profile. Reconfigurable manufacturing paradigm was proposed as an advanced manufacturing philosophy to enhance the adaptability and flexibility of manufacturing sys-tems. By physical and logical reconfiguration, Reconfigurable Manufacturing System (RMS) is able to fulfil customers’ needs in a cost-effective way by making full use of the resources currently available. This paper focuses on studying of reconfiguration cost of such systems. In this paper, DEDS modelling method Petri Net is used to construct the model for reconfiguration process of RMS which includes physical reconfiguration cost factors and conjunction matrix is used to describe the production processes. By highlighting the differences in the process set before and after reconfiguration, the reconfiguration principles have been proposed to describe and guide the process of the manufacturing system re-configuration. The simulation example is given to prove the validation of the proposed model.
机构地区 不详
出处 《Journal of Software Engineering and Applications》 2009年第5期361-369,共9页 软件工程与应用(英文)
关键词 RECONFIGURABLE Manufacturing System PETRI Net RECONFIGURATION COST Process Set CONJUNCTION Matrix Reconfigurable Manufacturing System Petri Net Reconfiguration Cost Process Set Conjunction Matrix
  • 相关文献

参考文献4

二级参考文献33

  • 1蔡宗琰.可重构制造系统的性能分析[J].航空学报,2004,25(5):516-519. 被引量:7
  • 2王芳,徐德,任思成,谭民.可重构制造系统的Petri网建模和分析方法[J].控制与决策,2005,20(6):660-664. 被引量:3
  • 3谭益智.柔性制造系统[M].北京:兵器工业出版社,1995..
  • 4朱正心 王敏之 肖伟跃.机械制造技术[M].北京:机械工业出版社,2001..
  • 5邓聚龙.灰预测与灰决策[M].武汉:华中科技大学出版社,2000..
  • 6张根保.自动化制造系统[M].北京:机械工业出版社,2002..
  • 7Y Koren, et al. Reconfigurable manufacturing systems [J]. Annals of the CIRP,1999, 48(2): 527~540
  • 8王家善,吴清一,周佳平.设施规划与设计[M].北京:机械工业出版社,1999.68-78.Wang Jiashan, Wu Qingyi, Zhou Jiaping. Facilities planning and design[M]. Beijing: China Machine Press, 1999.68-78.(in Chinese)
  • 9BORENSTEIN D.A visual interactive multicriteria decision analysis model for FMS design[J].International Journal of Advanced Manufacturing Technology,1998,14(1):848-857.
  • 10KOREN Y,HEISEL U,JOVANE F,et al.Reconfigurable manufacturing system[J].CIRP Annals,1999,48(2):527-540.

共引文献52

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部