Numerical Prediction of Ride Comfort of Tracked Vehicle Equipped with Novel Flexible Road Wheels

Enhancing ride comfort has always constituted a crucial focus in the design and research of modern tracked vehicles,heavily reliant on the driving system's performance.While the road wheel is a key component of the driving system,traditional road wheels predominantly adopt a solid structure,exhibiting subpar adhesion performance and damping effects,thereby falling short of meeting the demands for high-speed,stable,and long-distance driving in tracked vehicles.Addressing this issue,this paper proposes a novel type of flexible road wheel(FRW)characterized by a catenary construction.The study investigates the ride comfort of tracked vehicles equipped with flexible road wheels by integrating finite element and vehicle dynamic.First,three-dimensional(3D)finite element(FE)models of both flexible and rigid road wheels are established,considering material and contact nonlinearities.These models are validated through a wheel radial loading test.Based on the validated FE model,the paper uncovers the relationship between load and radial deformation of the road wheel,forming the basis for a nonlinear mathematical model.Subsequently,a half-car model of a tracked vehicle with seven degrees of freedom is established using Newton's second law.A random road model,considering the track effect and employing white noise,is constructed.The study concludes by examining the ride comfort of tracked vehicles equipped with flexible and rigid road wheels under various speeds and road grades.The results demonstrate that,in comparison to the rigid road wheel(RRW),the flexible road wheel enhances the ride comfort of tracked vehicles on randomly uneven roads.This research provides a theoretical foundation for the implementation of flexible road wheels in tracked vehicles.

基于ADAMS/Car Ride汽车平顺性仿真

以多体动力学理论为基础,应用机械系统动力学仿真分析软件ADAMS/Car专业模块建立某轿车的整车样机模型。根据路面不平度位移功率谱密度推导路面随机激励数学模型,由路面轮廓发生器产生随机路面,并进行了随机路面输入下的汽车平顺性仿真。其研究结果为虚拟样机技术在车辆工程中的实际应用提供了参考,为进一步对实际车辆做其他设计分析打下了良好的基础。

CATHODIC REDUCTION OF METAL-CHLORIDE COORDINATION IONS

ＣＡＴＨＯＤＩＣＲＥＤＵＣＴＩＯＮＯＦＭＥＴＡＬ－ＣＨＬＯＲＩＤＥＣＯＯＲＤＩＮＡＴＩＯＮＩＯＮＳＺｅｎ，Ｚｈｅｎｏｕ（ＤｅｐａｒｔｍｅｎｔｏｆＡｐｐｌｉｅｄＣｈｅｍｉｓｔｒｙＣｈｅｍｉｓｔｒｙ，ＳｏｕｔｈＣｈｉｎａＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎ...

极小化总加权完工时间的Dial-a-Ride问题的在线随机算法(英文)

讨论一般度量空间上带单服务器的极小化总加权完工时间在线Dial-a-Ride问题.通过应用贪婪区间的技巧,提出了一个一般在线随机算法.根据这个算法,对于容量为1或者任意容量的一般度量空间上的在线Dial-a-Ride问题能得到一个竞争比为(2+2)/ln(1+2)的在线随机算法,这个算法不仅具有当前最好的竞争比,而且也改进了Krumke等人的结果.

基于弱非线性RIDE模型的植物消浪数值模拟研究

通过基于考虑波浪非线性频散关系的椭圆型缓坡方程数学模型(RIDE),在原高阶的控制方程中添加植物阻力项,建立了模拟植物区波浪传播的数学模型(RIDE-VEG)。将计算结果与规则波在植物场中变形的水槽试验数据进行比较,验证良好,并分析了植物区特征参数对于波浪传播的影响。针对相对淹没度、植物密度和波浪周期等因素对波高衰减的影响进行敏感性分析,结果表明其三者对于消浪效果的影响是单调的,但消浪效果对于波浪周期的敏感程度则较其余二者为弱。与其他学者的研究相比,忽略流场效应的RIDE-VEG模型较其它的模型计算更为简便,且计算结果较为满意。

Hierarchical Control of Ride Height System for Electronically Controlled Air Suspension Based on Variable Structure and Fuzzy Control Theory

The current research of air suspension mainly focuses on the characteristics and design of the air spring. In fact, electronically controlled air suspension （ECAS） has excellent performance in flexible height adjustment during different driving conditions. However, the nonlinearity of the ride height adjusting system and the uneven distribution of payload affect the control accuracy of ride height and the body attitude. Firstly, the three-point measurement system of three height sensors is used to establish the mathematical model of the ride height adjusting system. The decentralized control of ride height and the centralized control of body attitude are presented to design the ride height control system for ECAS. The exact feedback linearization method is adopted for the nonlinear mathematical model of the ride height system. Secondly, according to the hierarchical control theory, the variable structure control （VSC） technique is used to design a controller that is able to adjust the ride height for the quarter-vehicle anywhere, and each quarter-vehicle height control system is independent. Meanwhile, the three-point height signals obtained by three height sensors are tracked to calculate the body pitch and roll attitude over time, and then by calculating the deviation of pitch and roll and its rates, the height control correction is reassigned based on the fuzzy algorithm. Finally, to verify the effectiveness and performance of the proposed combined control strategy, a validating test of ride height control system with and without road disturbance is carried out. Testing results show that the height adjusting time of both lifting and lowering is over 5 s, and the pitch angle and the roll angle of body attitude are less than 0.15°. This research proposes a hierarchical control method that can guarantee the attitude stability, as well as satisfy the ride height tracking system.

Annoyance Rate Evaluation Method on Ride Comfort of Vehicle Suspension System

The existing researches of the evaluation method of ride comfort of vehicle mainly focus on the level of human feelings to vibration. The level of human feelings to vibration is influenced by many factors, however, the ride comfort according to the common principle of probability and statistics and simple binary logic is tmable to reflect these uncertainties. The random fuzzy evaluation model from people subjective response to vibration is adopted in the paper, these uncertainties are analyzed from the angle of psychological physics. Discussing the traditional evaluation of ride comfort during vehicle vibration, a fuzzily random evaluation model on the basis of annoyance rate is proposed for the human body＇s subjective response to vibration, with relevant fuzzy membership function and probability distribution given. A half-car four degrees of freedom suspension vibration model is described, subject to irregular excitations from the road surface, with the aid of software Matlab/Simulink. A new kind of evaluation method for ride comfort of vehicles is proposed in the paper, i.e., the annoyance rate evaluation method. The genetic algorithm and neural network control theory are used to control the system. Simulation results are obtained, such as the comparison of comfort reaction to vibration environments between before and after control, relationship of annoyance rate to vibration frequency and weighted acceleration, based on ISO 2631 / 1 （1982）, ISO 2631-1 （1997） and annoyance rate evaluation method, respectively. Simulated assessment results indicate that the proposed active suspension systems prove to be effective in the vibration isolation of the suspension system, and the subjective response of human being can be promoted from very uncomfortable to a little uncomfortable. Furthermore, the novel evaluation method based on annoyance rate can further estimate quantitatively the number of passengers who feel discomfort due to vibration. A new analysis method of vehicle comfort is presented.

Vehicle Ride Comfort Based on Matching Suspension System

The existing investigations of vehicle ride comfort mainly include motion characteristics analysis based on creating a multi-body dynamic simulation model,and the parameters analysis to improve the suspension control for the target.In the study of creating multi-body dynamics simulation models,there is usually without considering calibration and test verification,which make it difficult to ensure the production of engineering.In the study of improving the suspension control parameters for the target,there is a lack of systematic match about comfortable and human characteristics,so it is difficult to implement in the field of driving and leading the vehicle design.In this paper,based on the different characteristic of suspension system that effects on the vehicle ride comfort, according to the suspension system dynamic mechanism,the research methods of vehicle road test,bench test and CAE simulation is used,at the same time,several sensitivity analysis of vehicle ride comfort related to suspension stiffness and damping and speed is made. As a result,the key suspension systematic parameters are given that have important impact on vehicle ride comfort.Through matching parameters,a calibration analysis of suspension system based on human comfort is obtained.The analysis results show that the analysis methods for the design target of making the vehicle with best comfort are effective.On the basis of the theory study,five suspension parameter matching principles are explored to promise the vehicle with perfect ride comfort,which also provide theoretical basis and design methods for the passenger car best match of suspension system stiffness and damping.The research results have the promotional value of practicability and a wide range of engineering application.

Ride comfort evaluation for road vehicle based on rigid-flexible coupling multibody dynamics

In the present research two different whole vehicle multibody models are established respectively, including rigid and rigid-flexible coupling multibody vehicle models. The former is all composed by rigid bodies while in the later model, the flexible rear suspension is built based on the finite element method （FEM） and mode superposition method, in which the deformations of the components are considered. The ride simulations with different speeds are carried out on a 3D digitalized road, and the weighted root mean square （RMS） of accelerations on the seat surface,backrest and at the feet are calculated. The comparison between the responses of the rigid and rigid-flexible coupling multibody models shows that the flexibility of the vehicle parts significantly affects the accelerations at each position, and it is necessary to take the flexibility effects into account for the assessment of ride comfort. C 2013 The Chinese Society of Theoretical and Applied Mechanics. [doi： 10.1063/2.1301304]

Experimental Study on the Ride Comfort of a Crawler Power Chassis Scale Model Based on the Similitude Theory

The ride comfort experimental assessment of crawler off-road vehicle is relatively overlooked, and is expensive and difficult to execute with higher and higher ride comfort performance requirements. To trade off between precise and cost, an experimental method based on the similitude theory is proposed. Under the guidance of the similitude theory, a 1：5 crawler power chassis scale model equipped with a kind of variable stiffness suspension system is used. The power spectrum density（PSD）, the root mean square（RMS） of weighed acceleration, peak factor, average absorbed power（AAP） and vibration dose value（VDV） are selected as ride comfort evaluation indexes, and tests results are transformed via similarity indexes to predict the performance of full-scale power chassis. PSD shows that the low-order natural frequency of the vertical natural frequency（z axis） is 1.1 Hz, and the RMS, AAP and VDV values indicate the ride comfort performance of this kind of power chassis is between the ＂A little uncomfortable＂ and ＂Rather uncomfortable＂. From the results, low-order vertical natural frequency, obtained by PSD, validates that the similarity relationship between two models is satisfied, and 1：5 scale model used in experiment meets the similarity relationship with the full-scale model; consequently, the ride comfort prophase evaluation with the 1：5 scale model is feasible. The attempt of applying the similitude theory to crawler vehicle ride comfort test study decreases the cost and improves the test feasibility with sufficient test precise.

Ride quality evaluation of the soil compactor cab supplemented by auxiliary hydraulic mounts via simulation and experiment

In order to evaluate the ride quality of the soil compactor cab supplemented by the auxiliary hydraulic mounts (AHM), a nonlinear dynamic model of the soil compactor interacting with the off-road deformable terrain is established based on Matlab/Simulink sofware. The power spectral density (PSD) and the weighted root mean square (RMS) of acceleration responses of the vertical driver s seat, the cab s pitch and roll angle are chosen as objective functions in low-frequency range. Experimental investigation is also used to verify the accuracy of the model. The influence of the damping coefficients of the AHM on the cab s ride quality is analyzed, and damping coefficients are then optimized via a genetic algorithm program. The research results show that the cab s rubber mounts added by the AHM clearly improve the ride quality under various operating conditions. Particularly, with the optimal damping coefficients of the front-end mounts c a 1,2 = 1 500 N · s/m and of the rear-end mounts c a 3,4 =2 335 N · s/m, the weighted RMS values of the driver s seat, the cab s pitch and roll angle are reduced by 22.2%, 18.8%, 58.7%, respectively. Under the condition of the vehicle travelling, with the optimal damping coefficients of c a 1,2 = 1 500 N · s/m and c a 3,4 =1 882 N · s/m, the maximum PSD values of the driver s seat, the cab s pitch and roll angle are clearly decreased by 36.7%, 54.7% and 50.6% under the condition of the vehicle working.

The Outer Performance Degradation of Shock Absorber and Its Effect on Ride Comfort and Driving Safety

Based on the well-known quarter car representation of the automobile suspension,this paper deals with the effect of shock absorber outer performance degradation(OPD)on vehicle ride comfort and driving safety.Based on an elastici- ty model of a flat circular plate having a central hole,a program for the determina- tion of shock absorber outer performance(SOP)has been developed. Based on a hy- drodynamic theory,principles for the inter performance design of shock absorbers are presented to ensure expected SOP and the concept of critical velocity for the pre- vention of OPD is studied.By analysing the mechanism of degradation,a method for the elimination of shock absorber degradation is offered for practical structural design,i.e,the structural design of dual-tube gas charge shock absorbers.A good deal of experimental data,are presented to prove the theoreticaly studies.

Frequency Weighting Filter Design for Automotive Ride Comfort Evaluation

Few study gives guidance to design weighting filters according to the frequency weighting factors,and the additional evaluation method of automotive ride comfort is not made good use of in some countries.Based on the regularities of the weighting factors,a method is proposed and the vertical and horizontal weighting filters are developed.The whole frequency range is divided several times into two parts with respective regularity.For each division,a parallel filter constituted by a low-and a high-pass filter with the same cutoff frequency and the quality factor is utilized to achieve section factors.The cascading of these parallel filters obtains entire factors.These filters own a high order.But,low order filters are preferred in some applications.The bilinear transformation method and the least P-norm optimal infinite impulse response（IIR） filter design method are employed to develop low order filters to approximate the weightings in the standard.In addition,with the window method,the linear phase finite impulse response（FIR） filter is designed to keep the signal from distorting and to obtain the staircase weighting.For the same case,the traditional method produces 0.330 7 m · s^–2 weighted root mean square（r.m.s.） acceleration and the filtering method gives 0.311 9 m · s^–2 r.m.s.The fourth order filter for approximation of vertical weighting obtains 0.313 9 m · s^–2 r.m.s.Crest factors of the acceleration signal weighted by the weighting filter and the fourth order filter are 3.002 7 and 3.011 1,respectively.This paper proposes several methods to design frequency weighting filters for automotive ride comfort evaluation,and these developed weighting filters are effective.

基于ADAMS／Car Ride车辆平顺性仿真研究

以虚拟样机技术进行车辆平顺性仿真研究．建立了基于ADAMS／Car Ride的多体动理学模型，通过虚拟四柱试验台对模型进行仿真试验。仿真结果表明，ADAMS／Car Ride可方便地进行路面功率谱密度响应仿真试验，所建立的包含虚拟四柱试验台的整车模型可深入进行车辆平顺性研究。

Effect of the off-road terrains on the ride comfort of construction vehicles

In order to evaluate the impact of off-road terrains on the ride comfort of construction vehicles,a nonlinear dynamic model of the construction vehicles interacting with the terrain deformations is established based on Matlab/Simulink software.The weighted root mean square(RMS)acceleration responses and the power spectral density(PSD)acceleration responses of the driver s seat heave,the pitch and roll angle of the cab in the low-frequency region are chosen as objective functions under different operation conditions of the vehicle.The results show that the impact of off-road terrains on the driver s ride comfort and health is clear under various conditions of deformable terrains and range of vehicle velocities.In particular,the driver s ride comfort is greatly affected by a soil terrain while the comfortable shake of the driver is strongly affected by a sand terrain.In addition,when the vehicle travels on a poor soil terrain in the frequency range below 4 Hz,more resonance peaks of acceleration PSD responses occurred than that on a rigid road of ISO 2631-1 level C.Thus,the driver s health is significantly affected by the deformable terrain in a low-frequency range.

Research on the Security Monitoring of the Amusement Ride of Tourist Sites Based on RFID

RFID (Radio Frequency Identification) is a new technology making use of radio frequency to do non-touch- ing, two-way data transit between the reader and the electronic tag to identify target and exchange data. Because it is non-touching;it can work from long distance;it is fit to work in an unfavorable environment;it can identify moving target, it is widely used in industry, commerce, storage, transportation. This paper introduces the application of the RFID technology and its state of development and discusses the general situation of its application in different fields. Moreover, this paper takes the tourist mini-train as an example, designs a security monitoring system based on RFID and discusses its application in tourist industry.

Low Voltage Ride through Control Capability of a Large Grid Connected PV System Combining DC Chopper and Current Limiting Techniques

This paper presents the development and performance capability of a comprehensive Low voltage ride through (LVRT) control scheme that makes use of both the DC chopper and the current limiting based on the required reactive power during fault time. The study is conducted on an 8.5 MW single stage PV power plant (PVPP) connected to the Rwandan grid. In the event of fault disturbance, this control scheme helps to overcome the problems of excessive DC-link voltage by fast activation of the DC chopper operation. At the same instance, AC current is limited to the maximum rating of the inverter as a function of the injected reactive current. This helps overcome AC-over- current that may possibly lead to damage or disconnection of the inverter. The control scheme also ensures voltage support and power balance through the injection of reactive current as per grid code requirements. Selected simulations using MATLAB are carried out in the events of different kinds of fault caused voltage dips. Results demonstrate the effectiveness of the proposed LVRT control scheme.

Effect of Low-Pressure Nitrogen DC Plasma Treatment on the Surface Properties of Biaxially Oriented Polypropylene, Poly (Methyl Methacrylate) and Polyvinyl Chloride Films

In this study, commercial biaxially oriented polypropylene （BOPP）, polyvinyl chlo- ride （PVC） and poly （methyl methacrylate） （PMMA） films were treated with nitrogen plasma over different exposure times in a Pyrex tube surrounded by a DC variable magnetic field. The chemi- cal changes that appeared on the surface of the samples were investigated using Fourier transform infrared （FT4R） spectroscopy and attenuated total reflectance Fourier transform infrared （ATR- FTIR） spectroscopy after treatment for 2 min, 4 min and 6 rain in a nitrogen plasma chamber. Effects of the plasma treatment on the surface topographies and contact angles of the untreated and plasma treated films were also analyzed by atomic force microscopy （AFM） and a contact angle measuring system. The results show that the plasma treated films become more hydrophilic with an enhanced wettability due to the formation of some new polar groups on the surface of the treated films. Moreover, at higher exposure times, the total surface energy in all treated films increased while a reduction in contact angle occurred. The behavior of surface roughness in each sample was completely different at higher exposure times.

Fault Ride-Through Capability Enhancement of PV System with Voltage Support Control Strategy

With continuously increasing of photovoltaic (PV) plant’s penetration, it has become a critical issue to improve the fault ride-through capability of PV plant. This paper refers to the German grid code, and the PV system is controlled to keep grid connected, as well as inject reactive current to grid when fault occurs. The mathematical model of PV system is established and the fault characteristic is studied with respect to the control strategy. By analyzing the effect of reactive power supplied by the PV system to the point of common coupling (PCC) voltage, this paper proposes an adaptive voltage support control strategy to enhance the fault ride-through capability of PV system. The control strategy fully utilizes the PV system’s capability of voltage support and takes the safety of equipment into account as well. At last, the proposed control strategy is verified by simulation.

Prediction Research on Ride Comfort of Special Full Trailer used by Precision Equipment

In order to evaluate a full trailer’s vibration performance,lumped mass model of seven degrees of freedom is set up to predict the ride comfort of whole vehicle.The acceleration history and the transfer function of each measuring point can be got from simulation.The analysis results show that the maximum acceleration RMS value of the vehicle mass center is about 0.3g,which satisfies the requirements of attenuating vibration of precision equipment being transported on particular roads and speeds.So the research provides valuable reference for the optimum selection of the suspension system’s parameters.