Stable Cycling of All-Solid-State Lithium Metal Batteries Enabled by Salt Engineering of PEO-Based Polymer Electrolytes

Poly(ethylene oxide)(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibility with high voltage cathodes.Therefore,a salt engineering of 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide lithium salt(LiHFDF)/LiTFSI system was developed in PEO-based electrolyte,demonstrating to effectively regulate Li ion transport and improve the interfacial stability under high voltage.We show,by manipulating the interaction between PEO matrix and TFSI^(-)-HFDF^(-),the optimized solid-state polymer electrolyte achieves maximum Li+conduction of 1.24×10^(-4)S cm^(-1)at 40℃,which is almost 3 times of the baseline.Also,the optimized polymer electrolyte demonstrates outstanding stable cycling in the LiFePO_(4)/Li and LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)/Li(3.0-4.4 V,200 cycles)based all-solid-state lithium batteries at 40℃.

Recent Advances in Energy Chemical Engineering of Next-Generation Lithium Batteries

Rechargeable lithium-ion batteries(LIBs)afford a profound impact on our modern daily life.However,LIBs are approaching the theoretical energy density,due to the inherent limitations of intercalation chemistry;thus,they cannot further satisfy the increasing demands of portable electronics,electric vehicles,and grids.Therefore,battery chemistries beyond LIBs are being widely investigated.Next-generation lithium(Li)batteries,which employ Li metal as the anode and intercalation or conversion materials as the cathode,receive the most intensive interest due to their high energy density and excellent potential for commercialization.Moreover,significant progress has been achieved in Li batteries attributed to the increasing fundamental understanding of the materials and reactions,as well as to technological improvement.This review starts by summarizing the electrolytes for next-generation Li batteries.Key challenges and recent progress in lithium-ion,lithium–sulfur,and lithium–oxygen batteries are then reviewed from the perspective of energy and chemical engineering science.Finally,possible directions for further development in Li batteries are presented.Next-generation Li batteries are expected to promote the sustainable development of human civilization.

Electrochemical reduction of carbon dioxide to produce formic acid coupled with oxidative conversion of biomass

Electrochemical reduction of CO_(2)(CO_(2)RR)has become a research hot spot in recent years in the context of carbon neutrality.HCOOH is one of the most promising products obtained by electrochemical reduction of CO_(2) due to its high energy value as estimated by market price per energy unit and wide application in chemical industry.Biomass is the most abundant renewable resource in the natural world.Coupling biomass oxidative conversion with CO_(2)RR driven by renewable electricity would well achieve carbon negativity.In this work,we comprehensively reviewed the current research progress on CO_(2)RR to produce HCOOH and coupled system for conversion of biomass and its derivatives to produce value-added products.Sn-and Bi-based electrocatalysts are discussed for CO_(2)RR with regards to the structure of the catalyst and reaction mechanisms.Electro-oxidation reactions of biomass derived sugars,alcohols,furan aldehydes and even polymeric components of lignocellulose were reviewed as alternatives to replace oxygen evolution reaction(OER)in the conventional electrolysis process.It was recommended that to further improve the efficiency of the coupled system,future work should be focused on the development of more efficient and stable catalysts,careful design of the electrolytic cells for improving the mass transfer and development of environment-friendly processes for recovering the formed formate and biomass oxidation products.

A review on plasma-based CO_(2) utilization:process considerations in the development of sustainable chemical production

Plasma-based processes,particularly in carbon capture and utilization,hold great potential for addressing environmental challenges and advancing a circular carbon economy.While significant progress has been made in understanding plasma-induced reactions,plasma-catalyst interactions,and reactor development to enhance energy efficiency and conversion,there remains a notable gap in research concerning overall process development.This review emphasizes the critical need for considerations at the process level,including integration and intensification,to facilitate the industrialization of plasma technology for chemical production.Discussions centered on the development of plasma-based processes are made with a primary focus on CO_(2) conversion,offering insights to guide future work for the transition of the technology from laboratory scale to industrial applications.Identification of current research gaps,especially in upscaling and integrating plasma reactors with other process units,is the key to addressing critical issues.The review further delves into relevant research in process evaluation and assessment,providing methodological insights and highlighting key factors for comprehensive economic and sustainability analyses.Additionally,recent advancements in novel plasma systems are reviewed,presenting unique advantages and innovative concepts that could reshape the future of process development.This review provides essential information for navigating the path forward,ensuring a comprehensive understanding of challenges and opportunities in the development of plasma-based CCU process.

Interfacial modulation of bifunctional electrolyte additive engineering for dendrite-free and robust lithium metal anode

Anode materials for rechargeable electric car batteries are obtained from Li-metal owing to their extremely high specific capacity and low redox potential.Unfortunately,safety concerns related to dendrite formation on the anode surface caused by the uneven distribution of Li-ions during the discharge process interfere with the use of Li-metal in industrial batteries.In this study,methyl vinyl sulfone(MVS),a sulfone-based functional electrolyte additive,is used in an additive engineering strategy to control Lielectrolyte interactions and address the aforementioned problems.Li dendrite growth may be restricted,and transition metal degradation on the surface of the cathode can be reduced by the MVS-derived functional electrolyte additive interfacial layer.The electrochemical performance of an ethylene carbonate/dimethyl carbonate(EC/DMC)+1 wt% MVS Li-metal anode of a Li||Li symmetric cell exhibits remarkable cycle stability,maintaining a low overvoltage for over 750 h at 1 mA cm^(-2),and capacity of 1 mA h cm^(-2).Additionally,LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811) full cells with the MVS additive exhibit enhanced electrochemical stability for 250 cycles at a current density of 100 mA g^(-1).This study provides an innovative approach for stabilizing the metal-electrolyte interfacial layer that may be used for practical applications in metal-based rechargeable batteries.

Physico-Chemical Analysis of Soils Used for Pineapple Cultivation in the Sub-Prefectures of Maferinyah and Friguiagbé (Prefectures of Forécariah and Kindia) Republic of Guinea

Over the years, pineapple production in the Republic of Guinea has become less competitive in the West African sub-region, with a world ranking of 144th. It is therefore only natural to review certain parameters in order to improve this ranking. To do this, certain physico-chemical parameters of soil samples from Friguiagbé and Maferinyah (in the Kindia and Forécariah prefectures) were taken and analysed using the following techniques: Pipette de Robinson, Anne, Bray II, Kapen HICDVITZ, Mc. Lead (1982). The analytical results show that the soils at Friguiagbé in Kindia and Maferinyah in Forécariah are acidic, with pH values of 4.4 and 4.7 (fields I and II) and 4.8 and 4.7 (fields I and II) respectively. The soils have a silty-sandy texture. This study could therefore serve as a guide for the Ministry of Agriculture of the Republic of Guinea.

Green microfluidics in microchemical engineering for carbon neutrality

The concept of“carbon neutrality”poses a huge challenge for chemical engineering and brings great opportunities for boosting the development of novel technologies to realize carbon offsetting and reduce carbon emissions.Developing high-efficient,low-cost,energy-efficient and eco-friendly microfluidicbased microchemical engineering is of great significance.Such kind of“green microfluidics”can reduce carbon emissions from the source of raw materials and facilitate controllable and intensified microchemical engineering processes,which represents the new power for the transformation and upgrading of chemical engineering industry.Here,a brief review of green microfluidics for achieving carbon neutral microchemical engineering is presented,with specific discussions about the characteristics and feasibility of applying green microfluidics in realizing carbon neutrality.Development of green microfluidic systems are categorized and reviewed,including the construction of microfluidic devices by bio-based substrate materials and by low carbon fabrication methods,and the use of more biocompatible and nondestructive fluidic systems such as aqueous two-phase systems(ATPSs).Moreover,low carbon applications benefit from green microfluidics are summarized,ranging from separation and purification of biomolecules,high-throughput screening of chemicals and drugs,rapid and cost-effective detections,to synthesis of fine chemicals and novel materials.Finally,challenges and perspectives for further advancing green microfluidics in microchemical engineering for carbon neutrality are proposed and discussed.

Analysis of Differences in Electrochemical Performance Between Coin and Pouch Cells for Lithium-Ion Battery Applications

Small coin cell batteries are predominantly used for testing lithium-ion batteries(LIBs)in academia because they require small amounts of material and are easy to assemble.However,insufficient attention is given to difference in cell performance that arises from the differences in format between coin cells used by academic researchers and pouch or cylindrical cells which are used in industry.In this article,we compare coin cells and pouch cells of different size with exactly the same electrode materials,electrolyte,and electrochemical conditions.We show the battery impedance changes substantially depending on the cell format using techniques including Electrochemical Impedance Spectroscopy(EIS)and Galvanostatic Intermittent Titration Technique(GITT).Using full cell NCA-graphite LIBs,we demonstrate that this difference in impedance has important knock-on effects on the battery rate performance due to ohmic polarization and the battery life time due to Li metal plating on the anode.We hope this work will help researchers getting a better idea of how small coin cell formats impact the cell performance and help predicting improvements that can be achieved by implementing larger cell formats.

Defect engineering of ternary Cu-In-Se quantum dots for boosting photoelectrochemical hydrogen generation

Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly affect the photophysical properties of QDs,the influence on photoelectrochemical hydrogen production is not well understood.Herein,we present the defect engineering of CISe QDs for efficient solar-energy conversion.Lewis acid–base reactions between metal halide–oleylamine complexes and oleylammonium selenocarbamate are modulated to achieve CISe QDs with the controlled amount of Cu vacancies without changing their morphology.Among them,CISe QDs with In/Cu=1.55 show the most outstanding photoelectrochemical hydrogen generation with excellent photocurrent density of up to 10.7 mA cm-2(at 0.6 VRHE),attributed to the suitable electronic band structures and enhanced carrier concentrations/lifetimes of the QDs.The proposed method,which can effectively control the defects in heavy-metal-free ternary QDs,offers a deeper understanding of the effects of the defects and provides a practical approach to enhance photoelectrochemical hydrogen generation.

Organic geochemical,petrographic and palynological characterization of claystones of the Palaeogene Toraja Formation,and oil seeps in the Enrekang Sub-basin,south Sulawesi,Indonesia:Implications for hydrocarbon source rock potential

An organic geochemical,petrographical,and palynological evaluation was conducted on 30 claystone outcrop samples of the Toraja Formation,along with a geochemical analysis of an oil seep in the Enrekang Sub-basin.The aim of the study was to determine the correlation between oil and source rock in terms of age,depositional environment,organic material sources,and maturity level.The total organic carbon content of the claystone samples varies from 0.03 to 4.52 wt%,which are classified as poor to excellent.The claystones are immature to post-mature with a mixture of TypeⅡandⅢkerogen.Their vitrinite reflectance values range from 0.47 to 4.52%Ro.The samples of Toraja Formation rock and the oil seep source rock might have a similar depositional environment,a deltaic marine depositional setting with high oxidizing conditions.Organic material sources for rock and oil samples are dominated by terrestrial input.The oil is inferred to have originated from the Paleogene source rocks,which correlates in age with the Toraja Formation.The recovered palynomorphs from the studied rock samples suggest a late Eocene to Oligocene age with a strong terrestrial influence of shallow marine depositional setting.The biomarker analysis shows that the rock samples have a more substantial contribution from the terrigenous higher plants,while the oil sample indicates a higher degree of marine influence.The maturity levels are also different between the oil(peak mature)and the analyzed rock samples(immature).It is inferred that the oil seep source rock is equivalent to the analyzed rock sample but more mature,having been deposited under more marine conditions.The oil seep source rock is not exposed and is located in the deeper part of the basin.A deeper marine facies(i.e.distal delta front and prodelta facies)in front of the distributary mouth bar within a delta is interpreted as the source rock of the oil seep sample.

Analysis of combustion characteristics and chemical properties for biocoke fuel

Analyses of the characteristics and properties of biocoke fuel from several biomass wastes were carried out to determine the energy potential of the fuel.Biocoke production in this research uses heating and pressure methods simultaneously under constant conditions.Experimental results using thermogravimetric analysis show that biocoke empty-fruit-bunches(EFB)have a higher energy potential of 26.57 MJ/kg.Meanwhile,mangrove biocoke recorded the lowest ash content at 1.81%compared to EFB at 5.09%.The carbon content of mangrove biocoke is 58.02%,slightly higher than that of EFB,56.70%,but EFB is higher than that of other biomass.Overall,the energy content recorded in biocoke increased significantly compared to raw biomass.

Development of Sustainable Solutions for Zebra Mussel Control Through Chemical Product Engineering

The zebra mussel is an important aquatic pest that causes great damage to freshwater-dependent industries, due to biofouling. The main goal of the project discussed here is to develop improved solutions to control this species. Three approaches have been explored in an attempt to design innovative application strategies for existing biocides： （i） encapsulation of toxins; （ii） combination of toxins; （iii） investigation of the seasonal variation of the species＇ tolerance to toxins. In this paper, the principles behind these approaches and the major results on each topic are presented. The benefits of adopting a chemical product engineering approach in conducting this project are also discussed.

Mechanochemical-Assisted Leaching of Lamp Phosphors： A Green Engineering Approach for Rare-Earth Recovery

Rare-earth elements （REEs） are essential metals for the design and development of sustainable energy applications, Recycling these elements from waste streams enriched in them is crucial for securing an independent future supply for sustainable applications, This study compares the mechanisms of mechan- ical activation prior to a hydrometallurgical acid-leaching process and a solvometallurgical mechanochemical leaching process for the recovery of REEs from green lamp phosphor, LaPO4：Ce3＋, Th3＋, After 60 min of processing time, the REE leaching rates showed a significant enhancement of 60% after cycled mechanical activation, and 98% after the combined mechanochemical leaching process, High-resolution transmission electron microscopy （HR-TEM） imaging disclosed the cause for the improved REE leaching rates： The improved leaching and leaching patterns could he attributed to changes in the crystal morphology from monocrystalline to polycrystalline, Reduction of the crystallite size to the nanoscale in a polycrystalline material creates irregular packing of chemical units, resulting in an increase in defect-rich grain boundaries in the crystals, which enhances the leaching process, A solvometallurgical method was developed to combine the mechanical activation and leaching process into a single step, which is beneficial for operational cost, This results in an efficient and simple process that provides an alternative and greener recycling route for lamp phosphor waste,

Physicochemical and Thermal Properties of Some Key Tropical Sawdust Woods for Energy Production

In South Saharan countries, 85% of the population uses biomass as a primary energy source. Cameroon presents one of the highest biomass energy and sawmills produce important sawdust resources which are not used and are burnt in piles leading to significant air toxic emissions. Therefore, we have to valorize industrially these available sawdusts. This study focuses on the physicochemical and thermochemical analysis of Ayous, Sapelli and Tali sawdust. The proximate and ultimate analysis, particle size, structural composition, as well as heavy metal content and calorific value were determined. In addition, the thermogravimetric mass losses were also estimated. The results showed that high water contents (24% - 41%) were recorded in the raw sawdust, and the thermal treatment reduced these contents from 78% to values in the range of 4% - 9%. The values for ash and volatile matter content were respectively between 0.25% - 0.74% and 68% - 76%. The LHV is higher in Ayous (17.5 MJ/kg) and Sapelli (16.8 MJ/kg) than that of Tali (15.7 MJ/kg). The concentration of heavy metals is very low in each species. Extractives are more present in Tali (16.06%) than in the other sawdusts. Pyrolysis of sawdust shows the typical decomposition of hemicellulose (270˚C - 325˚C), cellulose (325˚C - 400˚C) and lignin (200˚C - 550˚C) with a maximum loss of 75% at 370˚C and the melting point is 320˚C. The results of the sawdust parameters determined in the paper can be valorized to reduce pollutants emissions by developing the efficiency and effectiveness of biomass energy processes and promoting the use of biomass as a sustainable alternative to traditional fossil fuels.

Study of the Chemical and Mineralogical Composition of Kindia Bauxite in the Republic of Guinea: The Case of the Saföfö Site

The chemical and mineralogical composition of bauxite deposits is a key factor in the profitability of refining processes. The study of bauxites from the Saföfö site has assessed variations in chemical and mineralogical composition under various conditions, as well as the optimum conditions for their exploitation. The methodologies used in this study include experimental methods for determining moisture content, chemical composition, mineralogical composition, and specific density of bauxite. The results show significant variation in moisture content among the bauxite samples, with values ranging from 2.90% to 17.80%. The silica percentages in the samples range from 1.69% to 8.14%, while alumina percentages vary from 36.81% to 54.03%. After calcination, alumina oxide percentages range from 40% to 75%. After chemical activation, alumina oxides Al2O3 range from 40% to over 50%. Gibbsite is the most abundant mineral, accounting for about 60% - 70% of the total composition of the bauxite samples. Samples A to F have bulk densities varying between approximately 3.6 and 3.9. Sample B has the highest density, around 3.9, while sample C has the lowest, at around 3.5. Bauxite mining at the Saföfö site offers significant potential for the alumina industry, provided appropriate processing methods are selected to maximize quality and profitability while minimizing environmental impact.

Intensification of chemical separation engineering by nanostructured channels and nanofluidics: From theories to applications

With the development of manufacturing technology on the nanoscale, the precision of nano-devices is rapidly increasing with lower cost. Different from macroscale or microscale fluids, many specific phenomena and advantages are observed in nanofluidics. Devices and process involving and utilizing these phenomena play an important role in many fields in chemical engineering including separation, chemical analysis and transmission.In this article, we summarize the state-of-the-art progress in theoretical studies and manufacturing technologies on nanofluidics. Then we discuss practical applications of nanofluidics in many chemical engineering fields,especially in separation and encountering problems. Finally, we are looking forward to the future of nanofluidics and believe it will be more important in the separation process and the modern chemical industry.

Engineering Research Progress of Electrochemical Microreaction Technology—A Novel Method for Electrosynthesis of Organic Chemicals

Electrochemical methods are environmentally friendly and have unique advantages in the synthesis of organic chemicals.However,their implementation is limited due to the complex transport problems posed by traditional electrochemical reactors.Recently,the application of microreaction technology in electrosynthesis studies has reduced the transport distance of ions and increased the specific surface area of electrodes,leading to efficient,successive,and easily scaled-up electrosynthesis technologies.In this review article,engineering advantages of using microchannels in electrosynthesis are discussed from process enhancement perspective.Flow patterns and mass transfer behaviors in recently reported electrochemical microreactors are analyzed,and prototypes for the reactor scale-up are reviewed.As a relatively new research area,many scientific rules and engineering features of electrosynthesis in microreactors require elucidation.Potential research foci,considered crucial for the development of novel electrosynthesis technology,are therefore proposed.

Comparative study of heat transfer and pressure drop for curved-twisted tubes utilized in chemical engineering

Increasing importance of heat transfer in chemical engineering science causes that investigation in the field of enhancement techniques is always one of the up-to-date topics for study.In the current comparative analysis,the thermal enhancement and friction penalty are explored numerically for curved tubes via twisted configuration.To accomplish this,three common geometries namely helical,serpentine,and Archimedes spiral,are considered at different coil-pitches and twist-pitches as well as five Reynolds numbers in the laminar flow regime.The results exhibit noticeable enhancements(up to 60%)in the thermal performance of the twisted cases as compared to the smooth cases.The highest increases are recorded for the serpentine case,followed by the helical and spiral cases.It is found that these enhancements vary via coil-pitch and twist-pitch.Increasing coil-pitch and twist-pitch augments both heat transfer coefficient and pressure drop in all curved-twisted tubes,however,the effects of twist-pitch are more pronounced.To predict Nusselt number and friction factor,new correlations are also proposed.The maximum deviations of the predicted results compared to the simulated data are within±5%.

A review of the current state of biofuels production from lignocellulosic biomass using thermochemical conversion routes

The rapid increase in energy demand,the extensive use of fossil fuels and the urgent need to reduce the carbon dioxide emissions have raised concerns in the transportation sector.Alternate renewable and sustainable sources have become the ultimate solution to overcome the expected depletion of fossil fuels.The conversion of lignocellulosic biomass to liquid(BtL)transportation fuels seems to be a promising path and presents advantages over first generation biofuels and fossil fuels.Therefore,development of BtL systems is critical to increase the potential of this resource in a sustainable and economic way.Conversion of lignocellulosic BtL transportation fuels,such as,gasoline,diesel and jet fuel can be accomplished through various thermochemical processes and processing routes.The major steps for the production of BtL fuels involve feedstock selection,physical pretreatment,production of bio-oil,upgrading of bio-oil to transportation fuels and recovery of value-added products.The present work is aiming to give a comprehensive review of the current process technologies following these major steps and the current scenarios of biomass to liquid facilities for the production of biofuels.

Review of surfactant-assisted chemical enhanced oil recovery for carbonate reservoirs: challenges and future perspectives

A significant fraction of the conventional oil reserves globally is in carbonate formations which contain a substantial amount of residual oil. Since primary and secondary recovery methods fail to yield above 20%-40%of original oil in place from these reserves, the need for enhanced oil recovery（EOR） techniques for incremental oil recovery has become imperative. With the challenges presented by the highly heterogeneous carbonate rocks,evaluation of tertiary-stage recovery techniques including chemical EOR（c EOR） has been a high priority for researchers and oil producers. In this review, the latest developments in the surfactant-based c EOR techniques applied in carbonate formations are discussed, contemplating the future direction of existing methodologies. In connection with this, the characteristics of heterogeneous carbonate reservoirs are outlined. Detailed discussion on surfactant-led oil recovery mechanisms and related processes, such as wettability alteration, interfacial tension reduction, microemulsion phase behavior, surfactant adsorption and mitigation, and foams and their applications is presented. Laboratory experiments, as well as field study data obtained using several surfactants, are also included.This extensive discussion on the subject aims to help researchers and professionals in the field to understand the current situation and plan future enterprises accordingly.