Preliminary research and scheme design of deep underground in situ geo-information detection experiment for Geology in Time

The deep earth,deep sea,and deep space are the main parts of the national“three deep”strategy,which is in the forefront of the strategic deployment clearly defined in China’s 14th Five-Year Plan(2021-2025)and the Long-Range Objectives Through the Year 2035.It is important to reveal the evolutionary process and mechanism of deep tectonics to understand the earth’s past,present and future.The academic con-notation of Geology in Time has been given for the first time,which refers to the multi-field evolution response process of geological bodies at different time and spatial scales caused by geological processes inside and outside the Earth.Based on the deep in situ detection space and the unique geological envi-ronment of China Jinping Underground Laboratory,the scientific issue of the correlation mechanism and law between deep internal time-varying and shallow geological response is given attention.Innovative research and frontier exploration on deep underground in situ geo-information detection experiments for Geology in Time are designed to be carried out,which will have the potential to explore the driving force of Geology in Time,reveal essential laws of deep earth science,and explore innovative technologies in deep underground engineering.

Formation of Tianwen-1 landing crater and mechanical properties of Martian soil near the landing site

After landing in the Utopia Planitia,Tianwen-1 formed the deepest landing crater on Mars,approximately 40 cm deep,exposing precious information about the mechanical properties of Martian soil.We established numerical models for the plume-surface interaction(PSI)and the crater formation based on Computational Fluid Dynamics(CFD)methods and the erosion model modified from Roberts’Theory.Comparative studies of cases were conducted with different nozzle heights and soil mechanical properties.The increase in cohesion and internal friction angle leads to a decrease in erosion rate and maximum crater depth,with the cohesion having a greater impact.The influence of the nozzle height is not clear,as it interacts with the position of the Shock Diamond to jointly control the erosion process.Furthermore,we categorized the evolution of landing craters into the dispersive and the concentrated erosion modes based on the morphological characteristics.Finally,we estimated the upper limits of the Martian soil’s mechanical properties near Tianwen-1 landing site,with the cohesion ranging from 2612 to 2042 Pa and internal friction angle from 25°to 41°.

Development and characterization of the PolyU-1 lunar regolith simulant based on Chang’e-5 returned samples

Leading national space exploration agencies and private enterprises are actively engaged in lunar exploration initiatives to accomplish manned lunar landings and establish permanent lunar bases in the forthcoming years.With limited access to lunar surface materials on Earth,lunar regolith simulants are crucial for lunar exploration research.The Chang’e-5(CE-5)samples have been characterized by state-of-the-art laboratory equipment,providing a unique opportunity to develop a high-quality lunar regolith simulant.We have prepared a high-fidelity PolyU-1 simulant by pulverizing,desiccating,sieving,and blending natural mineral materials on Earth based on key physical,mineral,and chemical characteristics of CE-5 samples.The results showed that the simulant has a high degree of consistency with the CE-5 samples in terms of the particle morphology,mineral and chemical composition.Direct shear tests were conducted on the simulant,and the measured internal friction angle and cohesion values can serve as references for determining the mechanical properties of CE-5 lunar regolith.The PolyU-1 simulant can contribute to experimental studies involving lunar regolith,including the assessment of interaction between rovers and lunar regolith,as well as the development of in-situ resource utilization(ISRU)technologies.

Deformations at Earth’s dayside magnetopause during quasi-radial IMF conditions:Global kinetic simulations and Soft X-ray Imaging

The Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)is a joint mission of the European Space Agency(ESA)and the Chinese Academy of Sciences(CAS).Primary goals are investigating the dynamic response of the Earth's magnetosphere to the solar wind(SW)impact via simultaneous in situ magnetosheath plasma and magnetic field measurements,X-Ray images of the magnetosheath and magnetic cusps,and UV images of global auroral distributions.Magnetopause deformations associated with magnetosheath high speed jets(HSJs)under a quasi-parallel interplanetary magnetic field condition are studied using a threedimensional(3-D)global hybrid simulation.Soft X-ray intensity calculated based on both physical quantities of solar wind proton and oxygen ions is compared.We obtain key findings concerning deformations at the magnetopause:(1)Magnetopause deformations are highly coherent with the magnetosheath HSJs generated at the quasi-parallel region of the bow shock,(2)X-ray intensities estimated using solar wind h+and self-consistentO7+ions are consistent with each other,(3)Visual spacecraft are employed to check the discrimination ability for capturing magnetopause deformations on Lunar and polar orbits,respectively.The SMILE spacecraft on the polar orbit could be expected to provide opportunities for capturing the global geometry of the magnetopause in the equatorial plane.A striking point is that SMILE has the potential to capture small-scale magnetopause deformations and magnetosheath transients,such as HSJs,at medium altitudes on its orbit.Simulation results also demonstrate that a lunar based imager(e.g.,Lunar Environment heliospheric X-ray Imager,LEXI)is expected to observe a localized brightening of the magnetosheath during HSJ events in the meridian plane.These preliminary results might contribute to the pre-studies for the SMILE and LEXI missions by providing qualitative and quantitative soft X-ray estimates of dayside kinetic processes.

Rising utilization of stable isotopes in tree rings for climate change and forest ecology

Analyses of stable isotopes(C,O,H)in tree rings are increasingly important cross-disciplinary programs.The rapid development in this field documented in an increasing number of publications requires a comprehensive review.This study includes a bibliometric analysis-based review to better understand research trends in tree ring stable isotope research.Overall,1475 publications were selected from the Web of Science Core Collection for 1974-2023.The findings are that:(1)numbers of annual publications and citations increased since 1974.From 1974 to 1980,there were around two relevant publications per year.However,from 2020 to 2022,this rose sharply to 109 publications per year.Likewise,average article citations were less than four per year before 1990,but were around four per article per year after 2000;(2)the major subjects using tree ring stable isotopes include forestry,geosciences,and environmental sciences,contributing to 42.5%of the total during 1974-2023;(3)the top three most productive institutions are the Chinese Academy of Sciences(423),the Swiss Federal Institute for Forest,Snow and Landscape Research(227),and the University of Arizona(204).These achievements result from strong collaborations;(4)review papers,for example,(Dawson et al.,Annu Rev Ecol Syst 33:507-559,2002)and(McCarroll and Loader,Quat Sci Rev 23:771-801,2004),are among the most cited,with more than 1000 citations;(5)tree ring stable isotope studies mainly focus on climatology and ecology,with atmospheric CO_(2) one of the most popular topics.Since 2010,precipitation and drought have received increasing attention.Based on this analysis,the research stages,key findings,debated issues,limitations and direc-tions for future research are summarized.This study serves as an important attempt to understand the progress on the use of stable isotopes in tree rings,providing scientific guid-ance for young researchers in this field.

Formation,evolution,reconstruction of black shales and their influence on shale oil and gas resource

Black shales are important products of material cycling and energy exchange among the lithosphere,atmosphere,hydrosphere,and biosphere.They are widely distributed throughout geological history and provide essential energy and mineral resources for the development of human society.They also record the evolution process of the earth and improve the understanding of the earth.This review focuses on the diagenesis and formation mechanisms of black shales sedimentation,composition,evolution,and reconstruction,which have had a significant impact on the formation and enrichment of shale oil and gas.In terms of sedimentary environment,black shales can be classified into three types:Marine,terrestrial,and marine-terrestrial transitional facies.The formation processes include mechanisms such as eolian input,hypopycnal flow,gravity-driven and offshore bottom currents.From a geological perspective,the formation of black shales is often closely related to global or regional major geological events.The enrichment of organic matter is generally the result of the interaction and coupling of several factors such as primary productivity,water redox condition,and sedimentation rate.In terms of evolution,black shales have undergone diagenetic evolution of inorganic minerals,thermal evolution of organic matter and hydrocarbon generation,interactions between organic matter and inorganic minerals,and pore evolution.In terms of reconstruction,the effects of fold deformation,uplift and erosion,and fracturing have changed the stress state of black shale reservoirs,thereby having a significant impact on the pore structure.Fluid activity promotes the formation of veins,and have changed the material composition,stress structure,and reservoir properties of black shales.Regarding resource effects,the deposition of black shales is fundamental for shale oil and gas resources,the evolution of black shales promotes the shale oil and gas formation and storage,and the reconstruction of black shales would have caused the heterogeneous distribution of oil and gas in shales.Exploring the formation mechanisms and interactions of black shales at different scales is a key to in-depth research on shale formation and evolution,as well as the key to revealing the mechanism controlling shale oil and gas accumulation.The present records can reveal how these processes worked in geological history,and improve our understanding of the coupling mechanisms among regional geological events,black shales evolution,and shale oil and gas formation and enrichment.

Genesis of the Jianbeigou Gold Deposit on the Southern Margin of the North China Craton: Insights from Fluid Inclusions, H-O-S Isotopes, and Pyrite in situ Trace Element Analyses

The Jianbeigou gold deposit is a typical lode gold deposit in the Qinling metallogenic belt, located on the southern margin of the North China Craton. Three stages of the hydrothermal process can be distinguished, including the quartz ± pyrite, quartz-polymetallic sulfide, and quartz-carbonate ± pyrite stages. From the early to late stages, the homogenization temperatures of primary fluid inclusions are 281–362°C, 227–331°C, and 149–261°C, respectively. The corresponding salinities estimated for these fluids are 3.9–9.9 wt%, 0.4–9.4 wt%, and 0.7–7.2 wt% Na Cl equiv. Combined with laser Raman spectroscopy data, the ore-forming fluid belongs to a H_(2)O-CO_(2)-Na Cl ± CH_4 system with medium–low temperature and salinity. The δ~(18)Ofluid and δD values for the quartz veins are-1.0‰ to 6.0‰ and-105‰ to-84‰, respectively, which indicates that the ore-forming fluid is of mixed source, mainly derived from magma, with a contribution from meteoric water. Pyrite has been identified into three generations based on mineral paragenetic sequencing, including Py1, Py2, and Py3. The pyrites have δ~(34)S sulfur isotopic compositions from three stages between 3.7‰ and 8.4‰, indicating that sulfur mainly originated from magma. Te, Bi, Sb, and Cu contents in pyrite were all high and showed a strong correlation with Au concentrations. Native gold and the Au-Ag-Bi telluride minerals were formed concurrently, and the As concentration was low and decoupled from the Au content. Therefore, Te, Bi, Sb and other low-melting point chalcophile elements play an important role for gold mineralization in arsenic-deficient ore-forming fluid. Combined with the geological setting, evolution of pyrite, and ore-fluids geochemistry, we propose that the Jianbeigou deposit can be classified as a magmatic–hydrothermal lode gold deposit. Gold mineralization on the southern margin of the North China Craton is related to Early Cretaceous magmatism and formed in an extensional setting.

Dynamic response of mountain tunnel,bridge,and embankment along the Sichuan-Tibet transportation corridor to active fault based on model tests

The Sichuan-Tibet transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on different engineering structures,their combined effect remains unclear.This research employed multiple physical model tests to investigate the dynamic response of various engineering structures,including tunnels,bridges,and embankments,under the simultaneous influence of cumulative earthquakes and stick-slip misalignment of an active fault.The prototype selected for this study was the Kanding No.2 tunnel,which crosses the Yunongxi fault zone within the Sichuan-Tibet transportation corridor.The results demonstrated that the tunnel,bridge,and embankment exhibited amplification in response to the input seismic wave,with the amplification effect gradually decreasing as the input peak ground acceleration(PGA)increased.The PGAs of different engineering structures were weakened by the fault rupture zone.Nevertheless,the misalignment of the active fault may decrease the overall stiffness of the engineering structure,leading to more severe damage,with a small contribution from seismic vibration.Additionally,the seismic vibration effect might be enlarged with the height of the engineering structure,and the tunnel is supposed to have a smaller PGA and lower dynamic earth pressure compared to bridges and embankments in strong earthquake zones crossing active faults.The findings contribute valuable insights for evaluating the dynamic response of various engineering structures crossing an active fault and provide an experimental reference for secure engineering design in the challenging conditions of the Sichuan-Tibet transportation corridor.

The Origin of Mesozoic A-type Granitoids,Fujian Province,Southeast China:Insights from Geochronology,Mineralogy and Geochemistry

The magma sources,origins and precise forming ages of the miarolite from Qishan and Kuiqi intrusions are still uncertain.New results reveal that,miarolites from the Qishan and Kuiqi intrusions yield crystallization ages of~101 and~98 Ma,and they have a high formation temperature(~910℃)and low oxygen fugacity value,indicating crystallization condition at low pressure in the upper crust with temperature of 678℃.The Qishan and Kuiqi miarolites are characterized by enrichment in SiO_(2) and high-K alkali,depletion in Ca and Mg,and belong to the high-K weak peraluminous rock series.The samples are enriched in HFSEs(i.e.,Ta,Zr and Hf)and LILEs(i.e.,Ba,P and Sr),depleted in Ba and Sr with the negative anomaly of Eu.In the primitive mantle normalized trace element spider diagram,the samples show a right-inclined‘seagull-type’pattern,combined the ratios of(La/Yb)_(N),10000×Al/Ga,Rb/Nb and Nb/Ta etc.,they were proved to be alkaline A-type granite.Combined the characterize of the trace elements,they were derived from clay-rich source accompanied pelite melting,and subjected to K-feldspar crystallization fractional.The values of ε_(Hf)(t)and tDM2 are distributed in the range of-2.8 to 3.3 with~1.2 Ga,and-6.0 to 4.0 with~1.2 Ga,revealing that they were generated from the Mesoproterozoic Cathaysia basement rocks.The comprehensive research reveals the Kuiqi and Qishan intrusions derived from crust-mantle mixing and partial melting of the crust,respectively,resulting from lithospheric extension generated by the Paleo-Pacific Plate subducted into the European-Asian Plate.

Shear mechanical properties and fracturing responses of layered rough jointed rock-like materials

This study aims to investigate mechanical properties and failure mechanisms of layered rock with rough joint surfaces under direct shear loading.Cubic layered samples with dimensions of 100 mm×100 mm×100 mm were casted using rock-like materials,with anisotropic angle(α)and joint roughness coefficient(JRC)ranging from 15°to 75°and 2-20,respectively.The direct shear tests were conducted under the application of initial normal stress(σ_(n)) ranging from 1-4 MPa.The test results indicate significant differences in mechanical properties,acoustic emission(AE)responses,maximum principal strain fields,and ultimate failure modes of layered samples under different test conditions.The peak stress increases with the increasingαand achieves a maximum value atα=60°or 75°.As σ_(n) increases,the peak stress shows an increasing trend,with correlation coefficients R² ranging from 0.918 to 0.995 for the linear least squares fitting.As JRC increases from 2-4 to 18-20,the cohesion increases by 86.32%whenα=15°,while the cohesion decreases by 27.93%whenα=75°.The differences in roughness characteristics of shear failure surface induced byαresult in anisotropic post-peak AE responses,which is characterized by active AE signals whenαis small and quiet AE signals for a largeα.For a given JRC=6-8 andσ_(n)=1 MPa,asαincreases,the accumulative AE counts increase by 224.31%(αincreased from 15°to 60°),and then decrease by 14.68%(αincreased from 60°to 75°).The shear failure surface is formed along the weak interlayer whenα=15°and penetrates the layered matrix whenα=60°.Whenα=15°,as σ_(n) increases,the adjacent weak interlayer induces a change in the direction of tensile cracks propagation,resulting in a stepped pattern of cracks distribution.The increase in JRC intensifies roughness characteristics of shear failure surface for a smallα,however,it is not pronounced for a largeα.The findings will contribute to a better understanding of the mechanical responses and failure mechanisms of the layered rocks subjected to shear loads.

Automatic recognition of landslides based on YOLOv7 and attention mechanism

Landslide disasters comprise the majority of geological incidents on slopes,posing severe threats to the safety of human lives and property while exerting a significant impact on the geological environment.The rapid identification of landslides is important for disaster prevention and control;however,currently,landslide identification relies mainly on the manual interpretation of remote sensing images.Manual interpretation and feature recognition methods are time-consuming,labor-intensive,and challenging when confronted with complex scenarios.Consequently,automatic landslide recognition has emerged as a pivotal avenue for future development.In this study,a dataset comprising 2000 landslide images was constructed using open-source remote sensing images and datasets.The YOLOv7 model was enhanced using data augmentation algorithms and attention mechanisms.Three optimization models were formulated to realize automatic landslide recognition.The findings demonstrate the commendable performance of the optimized model in automatic landslide recognition,achieving a peak accuracy of 95.92%.Subsequently,the optimized model was applied to regional landslide identification,co-seismic landslide identification,and landslide recognition at various scales,all of which showed robust recognition capabilities.Nevertheless,the model exhibits limitations in detecting small targets,indicating areas for refining the deep-learning algorithms.The results of this research offer valuable technical support for the swift identification,prevention,and mitigation of landslide disasters.

Below-Moho Earthquakes of Tibet,Himalaya,the Indian Foreland,and Worldwide:How,Where and Why?

We seek to understand lithospheric rheology by mapping continental earthquake depths relative to Moho depth,across the entire India/Asia convergent orogen,and eventually worldwide.Such mapping has particular value in geothermometry,and potentially in identifying regions of delamination.How:We are extending our Sn/Lg method beyond amplitude ratios of regional seismic phases measured on arrays(array Sn/Lg method,Wang and Klemperer,2021)to include frequency proxies for earthquake depth relative to Moho(Wang&Klemperer,2024a,b;Harris et al.,2024).

Comparison of debris flow susceptibility assessment methods:support vector machine,particle swarm optimization,and feature selection techniques

The selection of important factors in machine learning-based susceptibility assessments is crucial to obtain reliable susceptibility results.In this study,metaheuristic optimization and feature selection techniques were applied to identify the most important input parameters for mapping debris flow susceptibility in the southern mountain area of Chengde City in Hebei Province,China,by using machine learning algorithms.In total,133 historical debris flow records and 16 related factors were selected.The support vector machine(SVM)was first used as the base classifier,and then a hybrid model was introduced by a two-step process.First,the particle swarm optimization(PSO)algorithm was employed to select the SVM model hyperparameters.Second,two feature selection algorithms,namely principal component analysis(PCA)and PSO,were integrated into the PSO-based SVM model,which generated the PCA-PSO-SVM and FS-PSO-SVM models,respectively.Three statistical metrics(accuracy,recall,and specificity)and the area under the receiver operating characteristic curve(AUC)were employed to evaluate and validate the performance of the models.The results indicated that the feature selection-based models exhibited the best performance,followed by the PSO-based SVM and SVM models.Moreover,the performance of the FS-PSO-SVM model was better than that of the PCA-PSO-SVM model,showing the highest AUC,accuracy,recall,and specificity values in both the training and testing processes.It was found that the selection of optimal features is crucial to improving the reliability of debris flow susceptibility assessment results.Moreover,the PSO algorithm was found to be not only an effective tool for hyperparameter optimization,but also a useful feature selection algorithm to improve prediction accuracies of debris flow susceptibility by using machine learning algorithms.The high and very high debris flow susceptibility zone appropriately covers 38.01%of the study area,where debris flow may occur under intensive human activities and heavy rainfall events.

Shear mechanical properties and frictional sliding responses of rough joint surfaces under dynamic normal displacement conditions

A comprehensive understanding of the dynamic frictional characteristics in rock joints under high normal load and strong confinement is essential for ensuring the safety of deep engineering construction and mitigating geological disasters.This study conducted shear experiments on rough rock joints under displacement-controlled dynamic normal loads,investigating the shear behaviors of joints across varying initial normal loads,normal loading frequencies,and normal loading amplitudes.Experimental results showed that the peak/valley shear force values increased with initial normal loads and normal loading frequencies but showed an initial increase followed by a decrease with normal loading amplitudes.Dynamic normal loading can either increase or decrease shear strength,while this study demonstrates that higher frequencies lead to enhanced friction.Increased initial normal loading and normal loading frequency result in a gradual decrease in joint roughness coefficient(JRC)values of joint surfaces after shearing.Positive correlations existed between frictional energy dissipation and peak shear forces,while post-shear joint surface roughness exhibited a negative correlation with peak shear forces through linear regression analysis.This study contributes to a better understanding of the sliding responses and shear mechanical characteristics of rock joints under dynamic disturbances.

An Overview on the Composition and Age of Upper Crust of Proto-Tethyan Lajishan Intra-oceanic Arc,NE Tibet Plateau

Identification and anatomy of oceanic arcs within ancient orogenic belt are significant for better understanding the tectonic framework and closure process of paleo-ocean basin.This article summarizes the geological,geochemical,and geochronological characteristics of upper crust of Proto-Tethyan Lajishan intra-oceanic arc and provides new data to constrain the subduction evolution of the South Qilian Ocean.The intra-oceanic arc volcanic rocks,including intermediate-mafic lava,breccia,tuff,and minor felsic rocks,are distributed along southern part of the Lajishan ophiolite belt.Geochemical and isotopic compositions indicate that the intermediate-mafic lava were originated from depleted mantle contaminated by sediment melts or hydrous fluids,whereas the felsic rocks were likely generated by partial melting of juvenile mafic crust in intra-oceanic arc setting.Zircons from felsic rocks yield consistent and concordant ages ranging from 506 to 523 Ma,suggesting these volcanic rocks represent the relicts of upper crust of the Cambrian intra-oceanic arc.Combined with the Cambrian forearc ophiolite and accretionary complex,we suggest that the Cambrian intra-oceanic arc in the Lajishan ophiolite belt is belonging to the intra-oceanic arc system which was generated by south-directed subduction in the South Qilian Ocean at a relatively short interval between approximately 530 and 480 Ma.

Apatite and zircon(U-Th)/He dating of sandstone in the Weibei Uplift,Ordos Basin and its revealed Eocene rapid uplift denudation event

1.Objective The Ordos Basin is a large sedimentary basin in central China.It is located in the western part of the North China Craton and contains rich hydrocarbon resources.The Weibei Uplift,a main secondary tectonic unit in the south of the Ordos Basin,is located in the transition zone between an active tectonic zone and a stable block.Its tectonic position is unique and important.Its evolution process is closely related to the tectonic evolution of the rigid block in the northern basin,the Weihe Graben in the south,and even the Qinling orogenic belt.

Experimental constraints on the formation of oxychlorine species by UV irradiation and mechanical pulverization on the lunar surface

Perchlorate and chlorate are present in various extraterrestrial celestial bodies throughout the solar system,such as Mars,the moon,and asteroids.To date,the origin mechanisms of perchlorate and chlorate on the Martian surface have been well-established;however,relatively little attention has been cast to airless bodies.Here,we experimentally investigated the potential oxidation mechanisms of chloride to chlorate and perchlorate,such as ultraviolet irradiation under H_(2)O-and O_(2)-free conditions and mechanical pulverization processes.Individual minerals,olivine,pyroxene,ilmenite,magnetite,TiO_(2)and anhydrous ferric sulfate,and lunar regolith simulants(low Ti,CLRS-1;high-Ti,CLRS-2)and their metallic iron(Fe^( 0))bearing counterparts were examined.We found that pulverization of dry matrix material-halite mixtures,even in the presence of O_(2),does not necessarily lead to perchlorate and chlorate formation without involving water.Under photocatalytic and H_(2)O and O_(2)-free conditions,olivine and pyroxene can produce oxychlorine(ClO_(x)^(−))species,although the yields were orders of magnitude lower than those under Martian-relevant conditions.Nanophase-Fe^(0)particles in the lunar regolith and the common photocatalyst TiO_(2)can facilitate the ClO_(x)^(−)formation,but their yields were lower than those with olivine.The oxides ilmenite and magnetite did not efficiently contribute to ClO_(x)^(−)production.Our results highlight the critical role of H_(2)O in the oxidation chloride to chlorate and perchlorate,and provide essential insights into the environmental influence on the formation of oxychlorine species on different celestial bodies.

Latest Scientific Results of China's Lunar and Deep Space Exploration(2022–2024)

China has successfully launched six lunar probes so far.From Chang'E-1 to Chang'E-4,they completed the circling,landing and roving exploration,of which Chang'E-4 was the first landing on the far side of the Moon in human history.Chang'E-5 was launched in December 2020,bringing back 1731 g of lunar soil samples.Through the detailed analysis of the samples,the scientists understand the history of late lunar volcanism,specifically extending lunar volcanism by about 800 million to 1 billion years,and proposed possible mechanisms.In addition,there are many new understandings of space weathering such as meteorite impacts and solar wind radiation on the Moon.China's first Mars exploration mission Tianwen-1 was successfully launched in July 2021.Through the study of scientific data,a number of important scientific achievements have been made in the topography,water environment and shallow surface structure of Mars.This paper introduces the main scientific achievements of Chang'E-4,Chang'E-5 and Tianwen-1 in the past two years,excluding technical and engineering contents.Due to the large number of articles involved,this paper only introduces part of the results.

Magnetized magma intrusions being sources of a weak and a strong lunar magnetic anomaly revealed by 3D distribution of magnetization

In this work,we aim to investigate the origin of the magnetic carriers in the lunar crust and the intensity of the ancient dynamo field.The magnetization and depth range of magnetic carriers are studied under a weak and a strong magnetic anomaly in Mare Tranquillitatis and in Oceanus Procellarum,respectively,where the surface ages are 3.6 and 3.3 billion years.A sophisticated three-dimensional amplitude inversion software program from a geophysical survey is used to reconstruct the distributions of magnetization in the lunar crust.Because no globally measured surface magnetic field exists for the Moon,a crustal magnetic anomaly model with a grid resolution of 0.2°is used.The depth range of the magnetic source is fixed by the boundary identified by a relative criterion,which is 20%of the recovered maximum magnetization.The central burial depths of the magnetic carriers are approximately 15 km and 25 km under Reiner Gamma and Mare Tranquillitatis,respectively.The volumes of the two magnetic sources are at scales of 104 and 105 km3,respectively.The aforementioned differences may imply a hotter crust under Reiner Gamma than Mare Tranquillitatis by 3.3 billion years.The results support the view that the magma intrusions magnetized by an ancient magnetic field could be the origin of magnetic anomalies under Reiner Gamma and Mare Tranquillitatis.Compared with previous works,the maximum magnetization of 3 A/m under Reiner Gamma supports the intensity of the field being several microteslas.

Geology and mineralization of the Bayan Obo supergiant carbonatite-type REE-Nb-Fe deposit in Inner Mongolia, China: A review

The Bayan Obo supergiant carbonatite-related rare-earth-element-niobium-iron(REE-Nb-Fe) endogenetic deposit(thereafter as the Bayan Obo deposit), located at 150 km north of Baotou City in the Inner Mongolia Autonomous Region, is the largest rare-earth element(REE) resource in the world. Tectonically,this deposit is situated on the northern margin of the North China Craton and adjacent to the Xing’anMongolian orogenic belt to the south. The main strata within the mining area include the Neoarchean Se’ertengshan Group and the Mesoproterozoic Bayan Obo Group. Generally, the rare earth, niobium, and iron mineralization within the deposit are intrinsically related to the dolomite carbonatites and the extensive alteration of the country rocks caused by the carbonatite magma intrusion. The alteration of country rocks can be categorized into three types: contact metasomatism(anti-skarn and skarn alteration), fenitization,and hornfelsic alternation. As indicated by previous studies and summarized in this review, the multielement mineralization at Bayan Obo is closely associated with the metasomatic replacement of siliceous country rocks by carbonatite magmatic-hydrothermal fluids. The metasomatic process is comparable to the conventional skarnification that formed due to the intrusion of intermediate-acid magmatic rocks into limestone strata. However, the migration pattern of Si O2, Ca O, and Mg O in this novel metasomatic process is opposite to the skarn alteration. Accordingly, this review delineates, for the first time, an antiskarn metallogenic model for the Bayan Obo deposit, revealing the enigmatic relationship between the carbonatite magmatic-hydrothermal processes and the related iron and rare earth mineralization.Moreover, this study also contributes to a better understanding of the REE-Nd-Fe metallogenetic processes and the related fluorite mineralization at the Bayan Obo deposit.