The nanometer TiO2 was prepared by pyrohydrolysis with titanic solution.The effects of species and content of the surfactants on the particle size,morphology and phase of TiO2 were studied by using LPA,XRD and TEM res...The nanometer TiO2 was prepared by pyrohydrolysis with titanic solution.The effects of species and content of the surfactants on the particle size,morphology and phase of TiO2 were studied by using LPA,XRD and TEM respectively.The results show that it is beneficial to reducing the aggregation of TiO2 particles with adding surfactants to the solution.Nanometer TiO2 powders with the size of 40-55 nm are obtained by adding the anion surfactants in the optimal content of 1.5%(mass fraction).The effect of cationic surfactant for reducing particle aggregation is not as good as that of anion.The crystal phase constitutent of TiO2 is dependent on the temperature of thermal treatment and complete anatase can be achieved after calcining in the temperature range of 350-750℃.展开更多
Antibacterial powders of titanium dioxide/silver sulfate were produced by heat-treatment of the metatitanic acid, as precursor, into which the silver nitrate was added. The influences of heating temperature on the str...Antibacterial powders of titanium dioxide/silver sulfate were produced by heat-treatment of the metatitanic acid, as precursor, into which the silver nitrate was added. The influences of heating temperature on the structure and composition of the product were investigated through XRD and SEM. The results show that the powder is spherical in the phase of TiO2-Ag2SO4. The granularity of the particles increases from 10.7nm to 28.7nm with the temperature of heat-treatment increasing from 300℃ to 800℃. The antibacterial activity of the powder was judged in the way of the minimum inhibitory contents （MiCs）. When the content of silver sulfate is less than 2%, the photocatalysis of titanium dioxide and silver ions cooperate to kill bacteria. And the MiCs decrease and keep around 1.0×10 -41.5×10 -4 constantly with the increase of silver content. Furthermore, the MiCs decrease with the increase of temperature of heat-treatment when the temperature is lower than 500℃. But when the temperature is beyond 600℃ the MiCs increase quickly, which shows the inferior antibacterial performance.展开更多
A novel technology of in-situ coating Al2O3 on the surface of H4TiO4 was developed to prevent the aggregation of nano-TiO2 powders and improve the dispersibility and thermal stability in the way of forming a uniform c...A novel technology of in-situ coating Al2O3 on the surface of H4TiO4 was developed to prevent the aggregation of nano-TiO2 powders and improve the dispersibility and thermal stability in the way of forming a uniform coating layer. The heterogeneous nucleation was conducted to prepare the precursor of nano-TiO2 and then Al2O3 was coated on the surface of precursor. The effects of Al2O3 in-situ coating on the properties of nano-TiO2 were investigated. The results show that H4 TiO4 can be dispersed well under alkaline condition （pH 8. 5） and the heterogeneous nucleation can be controlled easily. The optimized uniform coating layer is obtained by adding 5 % （mass fraction ） and 10% of Al2O3 and the aggregation of nano-TiO2 powders is effectively inhibited and the dispersibility is obviously improved. The crystal sizes of TiO2 powders are 12.3, 11.4 and 8. 7 nm after coating 0, 5% and 10% of Al2O3 respectively. Al2O3 on the surface of particulates in amorphous phase could increase the thermal stability of nano-partieles after calcined at 550℃.展开更多
基金Project(04GK2007)supported by the Key Project of Science and Technology Plan of Hunan Province,China
文摘The nanometer TiO2 was prepared by pyrohydrolysis with titanic solution.The effects of species and content of the surfactants on the particle size,morphology and phase of TiO2 were studied by using LPA,XRD and TEM respectively.The results show that it is beneficial to reducing the aggregation of TiO2 particles with adding surfactants to the solution.Nanometer TiO2 powders with the size of 40-55 nm are obtained by adding the anion surfactants in the optimal content of 1.5%(mass fraction).The effect of cationic surfactant for reducing particle aggregation is not as good as that of anion.The crystal phase constitutent of TiO2 is dependent on the temperature of thermal treatment and complete anatase can be achieved after calcining in the temperature range of 350-750℃.
文摘Antibacterial powders of titanium dioxide/silver sulfate were produced by heat-treatment of the metatitanic acid, as precursor, into which the silver nitrate was added. The influences of heating temperature on the structure and composition of the product were investigated through XRD and SEM. The results show that the powder is spherical in the phase of TiO2-Ag2SO4. The granularity of the particles increases from 10.7nm to 28.7nm with the temperature of heat-treatment increasing from 300℃ to 800℃. The antibacterial activity of the powder was judged in the way of the minimum inhibitory contents （MiCs）. When the content of silver sulfate is less than 2%, the photocatalysis of titanium dioxide and silver ions cooperate to kill bacteria. And the MiCs decrease and keep around 1.0×10 -41.5×10 -4 constantly with the increase of silver content. Furthermore, the MiCs decrease with the increase of temperature of heat-treatment when the temperature is lower than 500℃. But when the temperature is beyond 600℃ the MiCs increase quickly, which shows the inferior antibacterial performance.
文摘A novel technology of in-situ coating Al2O3 on the surface of H4TiO4 was developed to prevent the aggregation of nano-TiO2 powders and improve the dispersibility and thermal stability in the way of forming a uniform coating layer. The heterogeneous nucleation was conducted to prepare the precursor of nano-TiO2 and then Al2O3 was coated on the surface of precursor. The effects of Al2O3 in-situ coating on the properties of nano-TiO2 were investigated. The results show that H4 TiO4 can be dispersed well under alkaline condition （pH 8. 5） and the heterogeneous nucleation can be controlled easily. The optimized uniform coating layer is obtained by adding 5 % （mass fraction ） and 10% of Al2O3 and the aggregation of nano-TiO2 powders is effectively inhibited and the dispersibility is obviously improved. The crystal sizes of TiO2 powders are 12.3, 11.4 and 8. 7 nm after coating 0, 5% and 10% of Al2O3 respectively. Al2O3 on the surface of particulates in amorphous phase could increase the thermal stability of nano-partieles after calcined at 550℃.
