A 330-500 GHz zero-biased broadband monolithic integrated tripler is reported. The measured results show that the maximum efficiency and the maximum output power are 2% and 194μW at 348 GHz. The saturation characteri...A 330-500 GHz zero-biased broadband monolithic integrated tripler is reported. The measured results show that the maximum efficiency and the maximum output power are 2% and 194μW at 348 GHz. The saturation characteristic test shows that the output i dB compression point is about -8.5 dBm at 334 GHz and the maximum efficiency is obtained at the point, which is slightly below the 1 dB compression point. Compared with the conventional hybrid integrated circuit, a major advantage of the monolithic integrated circuit is the significant improvement of reliability and consistency. In this work, a terahertz monolithic frequency multiplier at this band is designed and fabricated.展开更多
A Schottky barrier diode with low-barrier is presented, based on which a terahertz waveguide detector working at 500-600 GHz is designed and fabricated. By using the InGaAs/InP material system, the feature of the low ...A Schottky barrier diode with low-barrier is presented, based on which a terahertz waveguide detector working at 500-600 GHz is designed and fabricated. By using the InGaAs/InP material system, the feature of the low barrier is obtained which greatly improves the performance of the detector. The measured typical voltage responsivity is about 900 V/W at 50-560 OHz and is about 400 V/W at 560 600 GHz. The proposed broadband waveguide detector has the characteristics of simple structure, compact size, low cost and high performance, and can be used in a variety of applications such as imaging, moleeuIar spectroscopy and atmospheric remote sensing.展开更多
A low-barrier Schottky barrier diode based on the InGaAs/InP material system is designed and fabricated with a new non-destructive dry over-etching process. By using this diode, a high-sensitivity waveguide detector i...A low-barrier Schottky barrier diode based on the InGaAs/InP material system is designed and fabricated with a new non-destructive dry over-etching process. By using this diode, a high-sensitivity waveguide detector is proposed. The measured maximum responsivity is over 2000 m V/m W at 630 GHz. The measured noise effective power （NEP） is less than 35pW/Hz0.5 at 570 -630GHz. The minimum NEP is 14pW/Hz0.5 at 630GHz. The proposed high-sensitivity waveguide detector has the characteristics of simple structure, compact size, low cost and high performance, and can be used in a variety of applications such as imaging, molecular spectroscopy and atmospheric remote sensing.展开更多
文摘本文利用ADS(advanced design system)软件建立了太赫兹肖特基二极管的SDD(symbolically-defined device)模型。该模型基于肖特基二极管的半导体理论,采用方程的形式来描述端口的特性。仿真得到的I-V曲线与实测结果有很高的吻合度,C-V曲线也与理论预测一致,最后将该SDD模型应用到一个140-160GHz理想平衡式二倍频器中,仿真得到的效率大于76.5%。当用与之参数一致的ADS自带的spice(simulation program with integrated circuit emphasis)模型代替后,二者的仿真结果具有很高的一致性。这说明了该SDD模型的准确性。相对于一般的spice模型,该SDD二极管模型的优势是结构简单、灵活性高,可根据用户需要灵活调整所有的方程和参数。
基金Supported by the National High-Technology Research and Development Program of China under Grant No 2011AA010203the National Basic Research Program of China under Grant Nos 2011CB201704 and 2010CB327502the National Natural Science Foundation of China under Grant Nos 61434006 and 61106074
文摘A 330-500 GHz zero-biased broadband monolithic integrated tripler is reported. The measured results show that the maximum efficiency and the maximum output power are 2% and 194μW at 348 GHz. The saturation characteristic test shows that the output i dB compression point is about -8.5 dBm at 334 GHz and the maximum efficiency is obtained at the point, which is slightly below the 1 dB compression point. Compared with the conventional hybrid integrated circuit, a major advantage of the monolithic integrated circuit is the significant improvement of reliability and consistency. In this work, a terahertz monolithic frequency multiplier at this band is designed and fabricated.
基金Supported by the National High-Technology Research and Development Program of China under Grant No 2011AA010203the National Basic Research Program of China under Grant Nos 2011CB201704 and 2010CB327502the National Natural Science Foundation of China under Grant No 61434006
文摘A Schottky barrier diode with low-barrier is presented, based on which a terahertz waveguide detector working at 500-600 GHz is designed and fabricated. By using the InGaAs/InP material system, the feature of the low barrier is obtained which greatly improves the performance of the detector. The measured typical voltage responsivity is about 900 V/W at 50-560 OHz and is about 400 V/W at 560 600 GHz. The proposed broadband waveguide detector has the characteristics of simple structure, compact size, low cost and high performance, and can be used in a variety of applications such as imaging, moleeuIar spectroscopy and atmospheric remote sensing.
基金Supported by the National Natural Science Foundation of China under Grant No 61434006the Basic Application Research of Sichuan Province under Grant No 2017JY0227
文摘A low-barrier Schottky barrier diode based on the InGaAs/InP material system is designed and fabricated with a new non-destructive dry over-etching process. By using this diode, a high-sensitivity waveguide detector is proposed. The measured maximum responsivity is over 2000 m V/m W at 630 GHz. The measured noise effective power （NEP） is less than 35pW/Hz0.5 at 570 -630GHz. The minimum NEP is 14pW/Hz0.5 at 630GHz. The proposed high-sensitivity waveguide detector has the characteristics of simple structure, compact size, low cost and high performance, and can be used in a variety of applications such as imaging, molecular spectroscopy and atmospheric remote sensing.
