The effect of annealing temperature on the martensitic transformation of a Ti49.2Ni50.8 alloy processed by equal channel angular pressing （ECAP） was investigated by X-ray diffraction （XRD）, transmission electron m...The effect of annealing temperature on the martensitic transformation of a Ti49.2Ni50.8 alloy processed by equal channel angular pressing （ECAP） was investigated by X-ray diffraction （XRD）, transmission electron microscopy （TEM） and differential scanning calorimetry （DSC）. The as-ECAP processed and subsequently annealed Ti49.2Ni50.8 alloys consist of B2 parent phase, Ti4Ni2O phase and B19′ martensite at room temperature. Upon cooling, all samples show B2→R→B19′ two-stage transformation. Upon heating, when the annealing temperature is less than 400℃, the samples show B19′→R→B2 two-stage transformation; when the annealing temperature is higher than 500 ℃, the samples show B19′→B2 single-stage transformation. The B2-R transformation is characterized by wide interval due to the dislocations introduced during ECAP.展开更多
The preparation of TiO2/poly（L-lactide-co-ε-caprolactone）（PLCL） nanocomposites and their properties were reported.TiO2nanoparticles were surface modified by ring-opening polymerization of ε-caprolactone（ε-CL）...The preparation of TiO2/poly（L-lactide-co-ε-caprolactone）（PLCL） nanocomposites and their properties were reported.TiO2nanoparticles were surface modified by ring-opening polymerization of ε-caprolactone（ε-CL）.The resulting poly（ε-caprolactone）-grafted TiO2（g-TiO2） was characterized by Fourier transform infrared spectroscopy（FTIR）,thermogravimetric analysis（TGA） and transmission electron microscopy（TEM）.The g-TiO2can be uniformly dispersed in chloroform and the g-TiO2/PLCL nanocomposites were successfully fabricated through solvent-casting method.The effects of the content of g-TiO2nanoparticles on tensile properties and shape memory properties were investigated.A significant improvement in the tensile properties of the 5% g-TiO2/PLCL mass fraction nanocomposite is obtained：an increase of 113% in the tensile strength and an increase of 11% in the elongation at break over pure PLCL polymer.The g-TiO2/PLCL nanocomposites with a certain amount of g-TiO2content have better shape memory properties than pure PLCL polymer.The g-TiO2nanoparticles play an additional physical crosslinks which are contributed to improvement of the shape memory properties.展开更多
The microstructure, mechanical properties and electrical conductivity of the room-temperature and cryogenically rolled Cu-0.2wt.%Mg alloy were investigated by transmission electron microscopy (TEM), electron backscatt...The microstructure, mechanical properties and electrical conductivity of the room-temperature and cryogenically rolled Cu-0.2wt.%Mg alloy were investigated by transmission electron microscopy (TEM), electron backscattered diffraction (EBSD), hardness measurement, tensile tests and electrical conductivity measurement. The results show that for the cryorolled sample, the grain size is decreased by 41% compared with the sample processed at room temperature. With increasing thickness reduction, the microhardness of the alloy continuously increases and the electrical conductivity decreases. For the sample with 90% thickness reduction rolled at cryogenic temperature, the tensile strength and the electrical conductivity are 726 MPa and 74.5% IACS, respectively. The improved tensile strength can be mainly attributed to the grain boundaries strengthening and dislocation strengthening.展开更多
To obtain the lightweight,high strength,and high damping capacity porous NiTi alloys,the microwave sintering coupled with the Mg space holder technique was employed to prepare the porous NiTi alloys.The microstructure...To obtain the lightweight,high strength,and high damping capacity porous NiTi alloys,the microwave sintering coupled with the Mg space holder technique was employed to prepare the porous NiTi alloys.The microstructure,mechanical properties,phase transformation behavior,superelasticity,and damping capacity of the porous NiTi alloys were investigated.The results show that the porous NiTi alloys are mainly composed of the B2 NiTi phase with a few B19'NiTi phase as the sintering temperature is lower than or equal to 900℃.With increasing the sintering temperature,the porosities of the porous NiTi alloys gradually decrease and the compressive strength increases first,reaching the maximum value at 900℃,and then decreases.With increasing the Mg content from 1 wt.%to 7 wt.%,the porosities of the porous NiTi alloys increase from 37.8%to 47.1%,while the compressive strength decreases from 2058 to 1146 MPa.Compared with the NH4HCO3 space holder,the phase transformation behavior of the porous NiTi alloys prepared with Mg space holder changes,and all of the compressive strength,superelasticity,shape memory effect and damping capacity are greatly improved.展开更多
To clarify phase transformation evolution of Nb-doped Ni-Mn-Ga bulk alloys after aging and ball milling, the microstructure and phase transformation of the aged and ball-milled dual-phase Nb-doped Ni-Mn-Ga alloys were...To clarify phase transformation evolution of Nb-doped Ni-Mn-Ga bulk alloys after aging and ball milling, the microstructure and phase transformation of the aged and ball-milled dual-phase Nb-doped Ni-Mn-Ga alloys were investigated by SEM, EDS, XRD, DSC and susceptibility measurements. The as-cast alloys were mainly composed of the second phase with layer-shape and presented a reduced martensitic transformation with increasing the second phase content. The second phase transformed from layer-shape to dense bar-shape and the martensitic transformation was enhanced after being quenched at 1173 K. After aging at 673 and 873 K, the 3% Nb alloy with less second phase exhibited a single-step phase transformation, whereas the 6% Nb and 9% Nb alloys with more second phase exhibited a two-step martensitic transformation and Curie transition. The martensitic transformation and Curie transition of the as-milled dual-phase particles disappeared and were retrieved after annealing at 1073 K due to the recovery of high ordered structure of the matrix.展开更多
Microstructure,phase transformation and mechanical properties of NiMnGa particles/Cu composites prepared by spark plasma sintering method were investigated by SEM,EDS,XRD,susceptibility measurements and mechanical tes...Microstructure,phase transformation and mechanical properties of NiMnGa particles/Cu composites prepared by spark plasma sintering method were investigated by SEM,EDS,XRD,susceptibility measurements and mechanical tests.The NiMnGa particles were found to react with Cu matrix and the composites exhibited a similar crystal structure to the Cu matrix.The martensitic transformation and Curie transition of the composites were weakened due to the composition change of NiMnGa particles caused by reactions.With increasing NiMnGa particles content,the martensitic transformation and Curie transition of the composites were enhanced to some extent.However,the martensitic transformation temperature and Curie transition temperature were decreased by~50 K as compared to those of the original NiMnGa particles.The compressive strength of the composites increased with the increase of NiMnGa particles content,whereas the compressive strain was decreased gradually.展开更多
The effect of electropulsing treatment on microstructure and mechanical strength of laser metal deposited Ti−6Al−4V alloy was investigated in order to eliminate the anisotropy in strength of laser metal deposited Ti−6...The effect of electropulsing treatment on microstructure and mechanical strength of laser metal deposited Ti−6Al−4V alloy was investigated in order to eliminate the anisotropy in strength of laser metal deposited Ti−6Al−4V alloy by tensile tests,optical microscopy,scanning electron microscopy,electron back-scattered diffraction analyses and transmission electron microscopy.With increasing applied voltages from 0 to 130 V,the evolution of microstructure within columnarβgrains followed the sequence ofα′martensite→colonyαstructure→basket-weaveαstructure.The electropulsing treated at 130 V weakened the texture of martensite withinβgrains.The as-built Ti−6Al−4V alloy showed an anisotropy in yield strength(6.2%).After processing at 130 V,the anisotropy in yield strength was reduced to 0.6%,which was attributed to the almost equivalent distribution of Schmid factor in the samples deformed along different orientations.展开更多
基金Project(51001035)supported by the National Natural Science Foundation of ChinaProject(ZD201012)supported by the Natural Science Foundation of Heilongjiang Province,China+1 种基金Project(HEUCF201403012)supported by the Fundamental Research Funds for the Central Universities,ChinaProjects(20110491027,2012T50307)supported by the China Postdoctoral Science Foundation
基金Project(51001035)supported by the National Natural Science Foundation of ChinaProject(LBH-Q14035)supported by the Postdoctoral Funds for Scientific Research Initiation of Heilongjiang Province,ChinaProject(HEUCF20151002)supported by the Fundamental Research Funds for the Central Universities,China
文摘The effect of annealing temperature on the martensitic transformation of a Ti49.2Ni50.8 alloy processed by equal channel angular pressing （ECAP） was investigated by X-ray diffraction （XRD）, transmission electron microscopy （TEM） and differential scanning calorimetry （DSC）. The as-ECAP processed and subsequently annealed Ti49.2Ni50.8 alloys consist of B2 parent phase, Ti4Ni2O phase and B19′ martensite at room temperature. Upon cooling, all samples show B2→R→B19′ two-stage transformation. Upon heating, when the annealing temperature is less than 400℃, the samples show B19′→R→B2 two-stage transformation; when the annealing temperature is higher than 500 ℃, the samples show B19′→B2 single-stage transformation. The B2-R transformation is characterized by wide interval due to the dislocations introduced during ECAP.
基金Project(50903023) supported by the National Natural Science Foundation of ChinaProject(HEUCF201210005) supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2010RFQXG037) supported by Harbin Special Fund for Innovation Talents of Science and Technology,China
文摘The preparation of TiO2/poly（L-lactide-co-ε-caprolactone）（PLCL） nanocomposites and their properties were reported.TiO2nanoparticles were surface modified by ring-opening polymerization of ε-caprolactone（ε-CL）.The resulting poly（ε-caprolactone）-grafted TiO2（g-TiO2） was characterized by Fourier transform infrared spectroscopy（FTIR）,thermogravimetric analysis（TGA） and transmission electron microscopy（TEM）.The g-TiO2can be uniformly dispersed in chloroform and the g-TiO2/PLCL nanocomposites were successfully fabricated through solvent-casting method.The effects of the content of g-TiO2nanoparticles on tensile properties and shape memory properties were investigated.A significant improvement in the tensile properties of the 5% g-TiO2/PLCL mass fraction nanocomposite is obtained：an increase of 113% in the tensile strength and an increase of 11% in the elongation at break over pure PLCL polymer.The g-TiO2/PLCL nanocomposites with a certain amount of g-TiO2content have better shape memory properties than pure PLCL polymer.The g-TiO2nanoparticles play an additional physical crosslinks which are contributed to improvement of the shape memory properties.
基金Project(51671064) supported by the National Natural Science Foundation of ChinaProject(HEUCFG201836) supported by the Fundamental Research Funds for the Central Universities,ChinaProject supported by the Key Laboratory of Superlight Materials & Surface Technology(Harbin Engineering University),Ministry of Education,China
文摘The microstructure, mechanical properties and electrical conductivity of the room-temperature and cryogenically rolled Cu-0.2wt.%Mg alloy were investigated by transmission electron microscopy (TEM), electron backscattered diffraction (EBSD), hardness measurement, tensile tests and electrical conductivity measurement. The results show that for the cryorolled sample, the grain size is decreased by 41% compared with the sample processed at room temperature. With increasing thickness reduction, the microhardness of the alloy continuously increases and the electrical conductivity decreases. For the sample with 90% thickness reduction rolled at cryogenic temperature, the tensile strength and the electrical conductivity are 726 MPa and 74.5% IACS, respectively. The improved tensile strength can be mainly attributed to the grain boundaries strengthening and dislocation strengthening.
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(51101085,51764041,51704167)the Aeronautical Science Foundation of China(2015ZF56027,2016ZF56020)+2 种基金the Opening Project of National Engineering Research Center for Powder Metallurgy of Titanium&Rare Metals,China(2019004)the Key Laboratory of Lightweight and High Strength Structural Materials of Jiangxi Province,China(20171BCD40003)the Jiangxi Provincial Natural Science Foundation,China(20202ACBL214011).
文摘To obtain the lightweight,high strength,and high damping capacity porous NiTi alloys,the microwave sintering coupled with the Mg space holder technique was employed to prepare the porous NiTi alloys.The microstructure,mechanical properties,phase transformation behavior,superelasticity,and damping capacity of the porous NiTi alloys were investigated.The results show that the porous NiTi alloys are mainly composed of the B2 NiTi phase with a few B19'NiTi phase as the sintering temperature is lower than or equal to 900℃.With increasing the sintering temperature,the porosities of the porous NiTi alloys gradually decrease and the compressive strength increases first,reaching the maximum value at 900℃,and then decreases.With increasing the Mg content from 1 wt.%to 7 wt.%,the porosities of the porous NiTi alloys increase from 37.8%to 47.1%,while the compressive strength decreases from 2058 to 1146 MPa.Compared with the NH4HCO3 space holder,the phase transformation behavior of the porous NiTi alloys prepared with Mg space holder changes,and all of the compressive strength,superelasticity,shape memory effect and damping capacity are greatly improved.
基金Project(51201044) supported by the National Natural Science Foundation of ChinaProject(HEUCFG201836) supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Project(LBH-Q16046) supported by the Postdoctoral Scientific Research Developmental Fund of Heilongjiang Province,ChinaProject supported by the Key Laboratory of Superlight Materials&Surface Technology(Harbin Engineering University),Ministry of Education,China
文摘To clarify phase transformation evolution of Nb-doped Ni-Mn-Ga bulk alloys after aging and ball milling, the microstructure and phase transformation of the aged and ball-milled dual-phase Nb-doped Ni-Mn-Ga alloys were investigated by SEM, EDS, XRD, DSC and susceptibility measurements. The as-cast alloys were mainly composed of the second phase with layer-shape and presented a reduced martensitic transformation with increasing the second phase content. The second phase transformed from layer-shape to dense bar-shape and the martensitic transformation was enhanced after being quenched at 1173 K. After aging at 673 and 873 K, the 3% Nb alloy with less second phase exhibited a single-step phase transformation, whereas the 6% Nb and 9% Nb alloys with more second phase exhibited a two-step martensitic transformation and Curie transition. The martensitic transformation and Curie transition of the as-milled dual-phase particles disappeared and were retrieved after annealing at 1073 K due to the recovery of high ordered structure of the matrix.
基金supported by the National Natural Science Foundation of China(No.51201044)High-level Scientific Research Guidance Project of Harbin Engineering University,China(No.3072022TS1006)+1 种基金Postdoctoral Scientific Research Developmental Fund of Heilongjiang Province,China(No.LBH-Q16046)Key Laboratory of Superlight Materials&Surface Technology(Harbin Engineering University),Ministry of Education,China.
文摘Microstructure,phase transformation and mechanical properties of NiMnGa particles/Cu composites prepared by spark plasma sintering method were investigated by SEM,EDS,XRD,susceptibility measurements and mechanical tests.The NiMnGa particles were found to react with Cu matrix and the composites exhibited a similar crystal structure to the Cu matrix.The martensitic transformation and Curie transition of the composites were weakened due to the composition change of NiMnGa particles caused by reactions.With increasing NiMnGa particles content,the martensitic transformation and Curie transition of the composites were enhanced to some extent.However,the martensitic transformation temperature and Curie transition temperature were decreased by~50 K as compared to those of the original NiMnGa particles.The compressive strength of the composites increased with the increase of NiMnGa particles content,whereas the compressive strain was decreased gradually.
基金financial supports from the National Key R&D Program of China (No.2017YFE0123500)。
文摘The effect of electropulsing treatment on microstructure and mechanical strength of laser metal deposited Ti−6Al−4V alloy was investigated in order to eliminate the anisotropy in strength of laser metal deposited Ti−6Al−4V alloy by tensile tests,optical microscopy,scanning electron microscopy,electron back-scattered diffraction analyses and transmission electron microscopy.With increasing applied voltages from 0 to 130 V,the evolution of microstructure within columnarβgrains followed the sequence ofα′martensite→colonyαstructure→basket-weaveαstructure.The electropulsing treated at 130 V weakened the texture of martensite withinβgrains.The as-built Ti−6Al−4V alloy showed an anisotropy in yield strength(6.2%).After processing at 130 V,the anisotropy in yield strength was reduced to 0.6%,which was attributed to the almost equivalent distribution of Schmid factor in the samples deformed along different orientations.
