In order to improve the electrochemical performance of polyoxomolybdate Na3[AlMo6O24H6]（NAM） as the cathode material of lithium ion battery, the NAM materials with small particle size were synthesized by elevatingth...In order to improve the electrochemical performance of polyoxomolybdate Na3[AlMo6O24H6]（NAM） as the cathode material of lithium ion battery, the NAM materials with small particle size were synthesized by elevatingthe synthesistemperaturein the solution.The as-prepared NAM materials were investigated by FT-IR, XRD, SEM and EIS. Their discharge-charge and cycle performance were also tested. The resultsshowthat the particle size decreasesto less than10μm at the temperature ofhigher than 40℃.When synthesized at 80℃,the NAMwiththe smallest particle size （-3μm）exhibitsthe best electrochemical performance such ashigh initial discharge capacity of 409 mA·h/gandcoulombic efficiency of 95% in the first cycle at 0.04C.展开更多
The polyoxovanadate（NH4）7[MnV13O38]（AMV） was synthesized and characterized by X-ray diffraction pattern, Fourier transform infrared spectra, and field emission scanning electron microscope equipped with energy dis...The polyoxovanadate（NH4）7[MnV13O38]（AMV） was synthesized and characterized by X-ray diffraction pattern, Fourier transform infrared spectra, and field emission scanning electron microscope equipped with energy dispersive X-ray spectroscopy. In order to improve the electrochemical performance of AMV, the particle size of as-prepared AMV is decreased to nanoscale by re-precipitation in the water-ethanol solution. The results of the electrochemical impedance spectra and the 4-pin probe measurements show that the electrical conductivity of AMV is improved by decreasing the particle size. The nanoparticle AMV shows higher initial discharge capacity and energy density than the as-prepared AMV when cycled at 0.5C. On the other hand, the nanoparticle AMV exhibits higher rate capability than the as-prepared AMV.展开更多
Binary carbon mixtures, carbon black ECP 600JD(ECP) combined with vapor grown carbon fiber(VGCF) or carbon nanotube(CNT), or graphene(Gr) in different mass ratios, are investigated as the conductive additives for the ...Binary carbon mixtures, carbon black ECP 600JD(ECP) combined with vapor grown carbon fiber(VGCF) or carbon nanotube(CNT), or graphene(Gr) in different mass ratios, are investigated as the conductive additives for the cathode material polyoxomolybadate Na_3[AlMo_6O_(24)H_6](NAM). Field emission scanning electron microscopy and energy dispersive X-ray spectroscopy show that the surfaces of NAM particles are covered homogeneously with the binary conductive additive mixtures except the combination of ECP and CNT. The optimum combination is the mixture of ECP and VGCF, which shows higher discharge capacity than the combinations of ECP and CNT or Gr. Initial discharge capacities of 364, 339, and 291 m A·h/g are obtained by the combination of ECP and VGCF in the mass ratios of 2:1, 1:1, and 1:2, respectively. The results of electrochemical impedance spectra and 4-pin probe measurements demonstrate that the combination of ECP and VGCF exhibits the highest electrical conductivity for the electrode.展开更多
文摘In order to improve the electrochemical performance of polyoxomolybdate Na3[AlMo6O24H6]（NAM） as the cathode material of lithium ion battery, the NAM materials with small particle size were synthesized by elevatingthe synthesistemperaturein the solution.The as-prepared NAM materials were investigated by FT-IR, XRD, SEM and EIS. Their discharge-charge and cycle performance were also tested. The resultsshowthat the particle size decreasesto less than10μm at the temperature ofhigher than 40℃.When synthesized at 80℃,the NAMwiththe smallest particle size （-3μm）exhibitsthe best electrochemical performance such ashigh initial discharge capacity of 409 mA·h/gandcoulombic efficiency of 95% in the first cycle at 0.04C.
文摘The polyoxovanadate（NH4）7[MnV13O38]（AMV） was synthesized and characterized by X-ray diffraction pattern, Fourier transform infrared spectra, and field emission scanning electron microscope equipped with energy dispersive X-ray spectroscopy. In order to improve the electrochemical performance of AMV, the particle size of as-prepared AMV is decreased to nanoscale by re-precipitation in the water-ethanol solution. The results of the electrochemical impedance spectra and the 4-pin probe measurements show that the electrical conductivity of AMV is improved by decreasing the particle size. The nanoparticle AMV shows higher initial discharge capacity and energy density than the as-prepared AMV when cycled at 0.5C. On the other hand, the nanoparticle AMV exhibits higher rate capability than the as-prepared AMV.
文摘Binary carbon mixtures, carbon black ECP 600JD(ECP) combined with vapor grown carbon fiber(VGCF) or carbon nanotube(CNT), or graphene(Gr) in different mass ratios, are investigated as the conductive additives for the cathode material polyoxomolybadate Na_3[AlMo_6O_(24)H_6](NAM). Field emission scanning electron microscopy and energy dispersive X-ray spectroscopy show that the surfaces of NAM particles are covered homogeneously with the binary conductive additive mixtures except the combination of ECP and CNT. The optimum combination is the mixture of ECP and VGCF, which shows higher discharge capacity than the combinations of ECP and CNT or Gr. Initial discharge capacities of 364, 339, and 291 m A·h/g are obtained by the combination of ECP and VGCF in the mass ratios of 2:1, 1:1, and 1:2, respectively. The results of electrochemical impedance spectra and 4-pin probe measurements demonstrate that the combination of ECP and VGCF exhibits the highest electrical conductivity for the electrode.
