Ni-La2O3/CeO2 composite films were prepared by electrodeposition from a nickel sulfate bath containing certain content of micrometer and nanometer La2O3/CeO2 particles. The effect of La2O3 or CeO2 particle size on the...Ni-La2O3/CeO2 composite films were prepared by electrodeposition from a nickel sulfate bath containing certain content of micrometer and nanometer La2O3/CeO2 particles. The effect of La2O3 or CeO2 particle size on the oxidation resistance of the electrodeposited Ni-La2O3/CeO2 composites in air at 1000 °C was studied. The results indicate that, compared with the electrodeposited Ni-film, Ni-La2O3/CeO2 composites exhibit a superior oxidation resistance due to the codeposited La2O3 or CeO2 particles blocking the outward diffusion of nickel. Moreover, compared with nanoparticles, La2O3 or CeO2 microparticles have stronger effect because La2O3 or CeO2 microparticles also act as a diffusion barrier layer at the onset of oxidation.展开更多
Three different chromizing coatings were produced on Ni substrate using a conventional pack-cementation method with Al2O3,Al2O3＋CeO2 and CeO2 acting as filler,respectively,at a greatly decreased temperature（700 ℃）...Three different chromizing coatings were produced on Ni substrate using a conventional pack-cementation method with Al2O3,Al2O3＋CeO2 and CeO2 acting as filler,respectively,at a greatly decreased temperature（700 ℃）.Effects of different fillers on the isothermal and cyclic oxidation resistance of chromizing coating in air at 850 ℃ were comparably investigated.Microstructure results show that the addition of CeO2 into the filler significantly retards the grain growth of the chromizing coating.Oxidation results indicate that the chromizing coating using CeO2 as filler exhibits somewhat increased oxidation resistance than the normal chromizmg coating,while the chromizing coating using Al2O3＋CeO2 as filler exhibits much better oxidation resistance.The effects of different fillers on the oxidation behaviors were discussed in detail.展开更多
基金Project(GC13A113)supported by the Technology Research and Development Program of Heilongjiang Provincial Science and Technology DepartmentProject(12511469)supported by Heilongjiang Provincial Science and Technology Department
文摘Ni-La2O3/CeO2 composite films were prepared by electrodeposition from a nickel sulfate bath containing certain content of micrometer and nanometer La2O3/CeO2 particles. The effect of La2O3 or CeO2 particle size on the oxidation resistance of the electrodeposited Ni-La2O3/CeO2 composites in air at 1000 °C was studied. The results indicate that, compared with the electrodeposited Ni-film, Ni-La2O3/CeO2 composites exhibit a superior oxidation resistance due to the codeposited La2O3 or CeO2 particles blocking the outward diffusion of nickel. Moreover, compared with nanoparticles, La2O3 or CeO2 microparticles have stronger effect because La2O3 or CeO2 microparticles also act as a diffusion barrier layer at the onset of oxidation.
基金Project (11551419) supported by Scientific Research Fund of Heilongjiang Provincial Education DepartmentProject (12511469) supported by Heilongjiang Provincial Science and Technology Department
文摘Three different chromizing coatings were produced on Ni substrate using a conventional pack-cementation method with Al2O3,Al2O3＋CeO2 and CeO2 acting as filler,respectively,at a greatly decreased temperature（700 ℃）.Effects of different fillers on the isothermal and cyclic oxidation resistance of chromizing coating in air at 850 ℃ were comparably investigated.Microstructure results show that the addition of CeO2 into the filler significantly retards the grain growth of the chromizing coating.Oxidation results indicate that the chromizing coating using CeO2 as filler exhibits somewhat increased oxidation resistance than the normal chromizmg coating,while the chromizing coating using Al2O3＋CeO2 as filler exhibits much better oxidation resistance.The effects of different fillers on the oxidation behaviors were discussed in detail.
