Adsorption performance of adsorbents for the adsorption cooling cycle was discussed. Adsorption isotherms and adsorption rate of water or ethanol on composite adsorbents prepared by the authors (named M4-0132, M1- 000...Adsorption performance of adsorbents for the adsorption cooling cycle was discussed. Adsorption isotherms and adsorption rate of water or ethanol on composite adsorbents prepared by the authors (named M4-0132, M1- 0001, M1-9906 and M2-0003 respectively), were tested. The results of fitting to the micro-pore filling theory equation and calculation of characteristic ads orption work based on these pairs were presented. The results showed that the a mount of water adsorbed by composite adsorbents was as high as 2 times that by s ilica gel and 2.5 times that by 13X molecular sieve, respectively, and characte ristic adsorption work calculated was 2.55～4.78 kJ·mol-1, only 12%～29 % of that on 13X molecular sieve. The values of adsorption rate of water on com posite adsorbents were higher than that on silica gel. Analysis for ethanol ads orption on composite adsorbent, M1-0001, showed occurrence of capillary condens ation, which resulted in a considerably higher ethanol uptake than on activated carbon at higher relative vapor pressure. The characteristic adsorption work of ethanol on composite sorbents was 2.55～4.78 kJ·mol-1, merely 10%～20% of that on activated carbon. Based on comprehensive estimate of adsorption pro perties, including adsorption loading, characteristic adsorption work and adsorp tion rate etc., M4-0132 and M1-0001 composite adsorbents were more prefer red for the adsorption cooling process, and the preferable type of isotherm for adsorption cooling cycle appeared to be the Ⅴ type of Brunauer classification.展开更多
Characteristics of 13x molecular sieve, silica gel and DH 5 and DH 7 prepared by authors, were investigated for the solid desiccant cooling system. The adsorption isotherms of DH 5 and DH 7 were experimentally det...Characteristics of 13x molecular sieve, silica gel and DH 5 and DH 7 prepared by authors, were investigated for the solid desiccant cooling system. The adsorption isotherms of DH 5 and DH 7 were experimentally determined. The performance parameters of adsorption capacity, air humidity, regeneration temperature and cooling volume were tested and discussed in detail. The results show that the properties of new adsorbents DH 5 and DH 7 on desiccant cooling are much better than those of common desiccants. The maximum adsorption volumes of water on DH 5 and DH 7 are 0.72?kg/kg and 0.73 ?kg/kg, respectively. The desiccant cooling volumes of DH 7and DH 5 are 2.2 and 1.3 times larger than those of silica gel and 13x(molecular sieve), respectively, after regeneration at 100?℃. The cooling volume per mass unit of DH 5 is 1.9 times larger that of 13x.展开更多
文摘Adsorption performance of adsorbents for the adsorption cooling cycle was discussed. Adsorption isotherms and adsorption rate of water or ethanol on composite adsorbents prepared by the authors (named M4-0132, M1- 0001, M1-9906 and M2-0003 respectively), were tested. The results of fitting to the micro-pore filling theory equation and calculation of characteristic ads orption work based on these pairs were presented. The results showed that the a mount of water adsorbed by composite adsorbents was as high as 2 times that by s ilica gel and 2.5 times that by 13X molecular sieve, respectively, and characte ristic adsorption work calculated was 2.55～4.78 kJ·mol-1, only 12%～29 % of that on 13X molecular sieve. The values of adsorption rate of water on com posite adsorbents were higher than that on silica gel. Analysis for ethanol ads orption on composite adsorbent, M1-0001, showed occurrence of capillary condens ation, which resulted in a considerably higher ethanol uptake than on activated carbon at higher relative vapor pressure. The characteristic adsorption work of ethanol on composite sorbents was 2.55～4.78 kJ·mol-1, merely 10%～20% of that on activated carbon. Based on comprehensive estimate of adsorption pro perties, including adsorption loading, characteristic adsorption work and adsorp tion rate etc., M4-0132 and M1-0001 composite adsorbents were more prefer red for the adsorption cooling process, and the preferable type of isotherm for adsorption cooling cycle appeared to be the Ⅴ type of Brunauer classification.
文摘Characteristics of 13x molecular sieve, silica gel and DH 5 and DH 7 prepared by authors, were investigated for the solid desiccant cooling system. The adsorption isotherms of DH 5 and DH 7 were experimentally determined. The performance parameters of adsorption capacity, air humidity, regeneration temperature and cooling volume were tested and discussed in detail. The results show that the properties of new adsorbents DH 5 and DH 7 on desiccant cooling are much better than those of common desiccants. The maximum adsorption volumes of water on DH 5 and DH 7 are 0.72?kg/kg and 0.73 ?kg/kg, respectively. The desiccant cooling volumes of DH 7and DH 5 are 2.2 and 1.3 times larger than those of silica gel and 13x(molecular sieve), respectively, after regeneration at 100?℃. The cooling volume per mass unit of DH 5 is 1.9 times larger that of 13x.
