小径厚比深水管道的压溃屈曲研究

深水管道所处的特殊海洋环境极易导致其发生压溃屈曲破坏。通过深入分析不同径厚比深水管道的压溃屈曲特点,并对具有不同径厚比及初始椭圆度的深水管道模型进行了压溃屈曲及后屈曲行为的计算分析。研究发现,压溃屈曲的经典理论公式并不适用于小径厚比深水管道。文章基于经典理论和数值模拟结果,得到了适用于小径厚比深水管道压溃屈曲分析的临界压力修正公式,进而对小径厚比深水管道的压溃屈曲评估提供理论支撑和工程推荐。

基于顶部张紧式立管动力分析的关键参数研究(英文)

文中提出了一种适用于工作于南中国海张力腿平台(TLP)的顶张紧式立管(TTR),并利用有限元软件ABAQUS/AQUA对该立管进行了模拟分析,计算用以预测立管波浪飞溅区和立管下部区域在波浪以及平台联合作用下的影响。计算时采取时域计算方法,计算过程中考虑了几何非线性的影响。并在计算完成TTR在位动力分析的基础之上,做了一定量的参数敏感性分析,重点考察立管侧向位移,弯矩以及等效应力水平对TTR一些重要参数的敏感性。结果表明,计算顶张力TTR动力分析时,必须考虑平台侧向位移跟轴向位移的耦合作用,立管响应受其顶部TLP平台以及张力比TTF的影响较大。随着立管顶部张力比TTF的增加,立管的变形逐渐变小,但顶部张力的增加同时增加了立管内部的等效应力,立管设计时应充分考虑到这两者之间的"平衡"关系。

Design and Analysis of Tapered Stress Joint for Top Tensioned Riser System

Stress Joint （SJ） plays a key role in the Top Tensioned Riser （TTR） system for deep water engineering. A preliminary design method of tapered SJ is proposed in the paper, which could help designers obtain accurate design data. After a further sensitive analysis is carried out, the related parameters choice and control methods are recommended in the engineering practice. By taking the extreme environment conditions into consideration, the effects of bending stress reduction and curve control are analyzed, and the 3-D FE models are established by ABQOUS for numerical evaluation to verify the correctness of design results. At last, dynamic analysis and fatigue analysis, based on actual project, are carried out with designed stress joint. The analysis results prove the feasibility and guidance of this method in the practical engineering applications.