采用铜模吸铸法在TiNiCuSn合金系中添加难熔金属Nb,制备出了d3 mm Ti60Cu14Ni12Sn4Nb10棒状多相复合材料。对该合金的显微组织特征和相组成进行了分析,并对其室温压缩性能进行了测试。研究结果表明,Ti60Cu14Ni12Sn4Nb10的显微组织主要由...采用铜模吸铸法在TiNiCuSn合金系中添加难熔金属Nb,制备出了d3 mm Ti60Cu14Ni12Sn4Nb10棒状多相复合材料。对该合金的显微组织特征和相组成进行了分析,并对其室温压缩性能进行了测试。研究结果表明,Ti60Cu14Ni12Sn4Nb10的显微组织主要由β-Ti枝晶相、纳米晶化相和少量非晶相组成。该合金在室温下表现出较好的综合力学性能,其抗压断裂强度可达1.71 GPa,断裂应变约为17.7%,弹性模量为116 GPa。合金的断口分析结果表明,由于产生了塑性枝晶相,因此该合金具有较高塑性。展开更多
Due to the diversified demands of quality of service（QoS） in volume multimedia application, QoS routings for multiservice are becoming a research hotspot in low earth orbit（LEO） satellite networks. A novel QoS sat...Due to the diversified demands of quality of service（QoS） in volume multimedia application, QoS routings for multiservice are becoming a research hotspot in low earth orbit（LEO） satellite networks. A novel QoS satellite routing algorithm for multi-class traffic is proposed. The goal of the routing algorithm is to provide the distinct QoS for different traffic classes and improve the utilization of network resources. Traffic is classified into three classes and allocated priorities based on their QoS requirements, respectively. A priority queuing mechanism guarantees the algorithm to work better for high-priority classes. In order to control the congestion, a blocking probability analysis model is built up based on the Markov process theory. Finally, according to the classification link-cost metrics, routings for different classes are calculated with the distinct QoS requirments and the status of network resource. Simulations verify the performance of the routing algorithm at different time and in different regions, and results demonstrate that the algorithm has great advantages in terms of the average delay and the blocking probability. Meanwhile, the robustness issue is also discussed.展开更多
文摘采用铜模吸铸法在TiNiCuSn合金系中添加难熔金属Nb,制备出了d3 mm Ti60Cu14Ni12Sn4Nb10棒状多相复合材料。对该合金的显微组织特征和相组成进行了分析,并对其室温压缩性能进行了测试。研究结果表明,Ti60Cu14Ni12Sn4Nb10的显微组织主要由β-Ti枝晶相、纳米晶化相和少量非晶相组成。该合金在室温下表现出较好的综合力学性能,其抗压断裂强度可达1.71 GPa,断裂应变约为17.7%,弹性模量为116 GPa。合金的断口分析结果表明,由于产生了塑性枝晶相,因此该合金具有较高塑性。
基金Supported by the National High Technology Research and Development Program of China(″863″Program)(2010AAxxx404)~~
文摘Due to the diversified demands of quality of service（QoS） in volume multimedia application, QoS routings for multiservice are becoming a research hotspot in low earth orbit（LEO） satellite networks. A novel QoS satellite routing algorithm for multi-class traffic is proposed. The goal of the routing algorithm is to provide the distinct QoS for different traffic classes and improve the utilization of network resources. Traffic is classified into three classes and allocated priorities based on their QoS requirements, respectively. A priority queuing mechanism guarantees the algorithm to work better for high-priority classes. In order to control the congestion, a blocking probability analysis model is built up based on the Markov process theory. Finally, according to the classification link-cost metrics, routings for different classes are calculated with the distinct QoS requirments and the status of network resource. Simulations verify the performance of the routing algorithm at different time and in different regions, and results demonstrate that the algorithm has great advantages in terms of the average delay and the blocking probability. Meanwhile, the robustness issue is also discussed.
