According to the bio-characteristics of the lower and upper cavity surfaces of dental restoration, a stitching approach is proposed based on a virtual zipper working mechanism and a minimization of the surface total c...According to the bio-characteristics of the lower and upper cavity surfaces of dental restoration, a stitching approach is proposed based on a virtual zipper working mechanism and a minimization of the surface total curvature energy, which is used to resolve the stitching problems existing during computer-aided design for dental restorations. First, the two boundaries corresponding to the lower and upper surfaces are triangulated based on the zipper working mechanism to generate the initial stitching surface patch, of which the edges are distributed uniformly between the boundaries. Secondly, the initial stitching surface patch is subdivided and deformed to reconstruct an optimized surface patch according to the bio-characteristics of the teeth. The optimized surface patch is minimally distinguishable from the surrounding mesh in smoothness and density, and it can stitch the upper and lower cavity surfaces naturally. The experimental results show that the dental restorations obtained by the proposed method can satisfy both the shape aesthetic and the fitting accuracy, and meet the requirements of clinical oral medicine.展开更多
System calibration, which usually involves complicated and time-consuming procedures, is crucial for any three-dimensional （3D） shape measurement system based on vision. A novel improved method is proposed for accur...System calibration, which usually involves complicated and time-consuming procedures, is crucial for any three-dimensional （3D） shape measurement system based on vision. A novel improved method is proposed for accurate calibration of such a measurement system. The system accuracy is improved with considering the nonlinear measurement error created by the difference between the system model and real measurement environment. We use Levenberg-Marquardt optimization algorithm to compensate the error and get a good result. The improved method has a 50% improvement of re-projection accuracy compared with our previous method. The measurement accuracy is maintained well within 1.5% of the overall measurement depth range.展开更多
基金National High Technology Research and Development Program of China (863 program) (2005AA420240)Jiangsu Key Science and Technology Project of China (GrantNo: BE2005014)+1 种基金Jiangsu Planned Projects for Postdoctoral Research (Grant No: 0701051B) Medical Science and Technology Development Program of Nanjing (ZKX0420)
基金The National High Technology Research and Development Program of China(863 Program)(No.2005AA420240)the Key Science and Technology Program of Jiangsu Province (No.BE2005014)
文摘According to the bio-characteristics of the lower and upper cavity surfaces of dental restoration, a stitching approach is proposed based on a virtual zipper working mechanism and a minimization of the surface total curvature energy, which is used to resolve the stitching problems existing during computer-aided design for dental restorations. First, the two boundaries corresponding to the lower and upper surfaces are triangulated based on the zipper working mechanism to generate the initial stitching surface patch, of which the edges are distributed uniformly between the boundaries. Secondly, the initial stitching surface patch is subdivided and deformed to reconstruct an optimized surface patch according to the bio-characteristics of the teeth. The optimized surface patch is minimally distinguishable from the surrounding mesh in smoothness and density, and it can stitch the upper and lower cavity surfaces naturally. The experimental results show that the dental restorations obtained by the proposed method can satisfy both the shape aesthetic and the fitting accuracy, and meet the requirements of clinical oral medicine.
基金supported partially by the National"863"Program of China(No.2005AA420240)the Doctoral Foundation of the Ministry of Education of China(No.20070287055)
文摘System calibration, which usually involves complicated and time-consuming procedures, is crucial for any three-dimensional （3D） shape measurement system based on vision. A novel improved method is proposed for accurate calibration of such a measurement system. The system accuracy is improved with considering the nonlinear measurement error created by the difference between the system model and real measurement environment. We use Levenberg-Marquardt optimization algorithm to compensate the error and get a good result. The improved method has a 50% improvement of re-projection accuracy compared with our previous method. The measurement accuracy is maintained well within 1.5% of the overall measurement depth range.
