High volatile bituminous coal .was demineralized by a chemical method. The vibrations of the ＂aromatics＂ structure of graphite, crystalline or non-crystalline, were observed in the spectra at the 1600 cm-1 region. T...High volatile bituminous coal .was demineralized by a chemical method. The vibrations of the ＂aromatics＂ structure of graphite, crystalline or non-crystalline, were observed in the spectra at the 1600 cm-1 region. The band at 1477 cm-1 is assigned as VR band, the band at 1392 cm-1 as VL band and the band at 1540 cm-1 as GR band. Graphite structure remains after chemical leaching liberates oxygenated functional groups and mineral groups. The silicate bands between 1010 and 1100 cm-1 are active in the infrared （IR） spec^urn but inactive in the Raman spectrum. Absorption arising from C-H stretching in alkenes occurs in the region of 3000 to 2840 cm-~. Raman bands because of symmetric stretch of water molecules were also observed in the spectrum at 3250 cm-1 and 3450 cm-1. Scanning electron microscopy analy- sis revealed the presence of a graphite layer on the surface. Leaching of the sample with hydrofluoric acid decreases the mineral phase and increases the carbon content. The ash content is reduced by 84.5wt% with leaching from its initial value by mainly removing aluminum and silicate containing minerals.展开更多
Stoichiometric pure and tellurium （Te） doped indium bismuthide （InBi） were grown using the directional freezing technique in a fabricated furnace. The X-ray diffraction profiles identified the crystallinity and ph...Stoichiometric pure and tellurium （Te） doped indium bismuthide （InBi） were grown using the directional freezing technique in a fabricated furnace. The X-ray diffraction profiles identified the crystallinity and phase composition. The surface topographical features were observed by scanning electron microscopy and atomic force microscopy. The energy dispersive analysis by X-rays was performed to identify the atomic proportion of elements. Studies on the temperature dependence of dielectric constant （e）, loss tangent （tan6）, and AC conductivity （cry） reveal the existence of a ferroelectric phase transition in the doped material at 403 K. When InBi is doped with tellurium （4.04 at%）, a band gap of 0.20 eV can be achieved, and this is confirmed using Fourier transform infrared studies. The results thus show the conversion of semimetallic InBi to a semiconductor with the optical properties suitable for use in infrared detectors.展开更多
The characterization of Indian bituminous and subbituminous coal was performed by UVVisible– NIR spectroscopy. Chemical leaching with varying concentration of hydrofluoric acid was conducted on both the samples. Elec...The characterization of Indian bituminous and subbituminous coal was performed by UVVisible– NIR spectroscopy. Chemical leaching with varying concentration of hydrofluoric acid was conducted on both the samples. Electronic absorption at this region was higher for higher ranked coals. Chemical leaching increased electronic transitions in subbituminous coal with maximum transitions for HF (10%) leached samples. The absorption maximum of benzeneoxygen system was found between 235-270 nm and was showing a red shift with leaching. The characteristic naphthalene ring systems (220 & 280 nm) were masked by the absorption regions of monoaromatic rings;indicating the content of napthalenoid hydrocarbon was very low. The bands observed in the visible region (450nm) were attributed to SO2 in the sample and was showing a red shift. The weak band at the 680 nm was attributed to the Ⅱ-Ⅱ* electronic transitions of the polynuclear aromatic hydrocarbons which also showed red shift with leaching. It was found that the ash content is reduced by 87.5% & 76.2% in bituminous and subbituminous coal respectively with HF (30%) leaching.展开更多
文摘High volatile bituminous coal .was demineralized by a chemical method. The vibrations of the ＂aromatics＂ structure of graphite, crystalline or non-crystalline, were observed in the spectra at the 1600 cm-1 region. The band at 1477 cm-1 is assigned as VR band, the band at 1392 cm-1 as VL band and the band at 1540 cm-1 as GR band. Graphite structure remains after chemical leaching liberates oxygenated functional groups and mineral groups. The silicate bands between 1010 and 1100 cm-1 are active in the infrared （IR） spec^urn but inactive in the Raman spectrum. Absorption arising from C-H stretching in alkenes occurs in the region of 3000 to 2840 cm-~. Raman bands because of symmetric stretch of water molecules were also observed in the spectrum at 3250 cm-1 and 3450 cm-1. Scanning electron microscopy analy- sis revealed the presence of a graphite layer on the surface. Leaching of the sample with hydrofluoric acid decreases the mineral phase and increases the carbon content. The ash content is reduced by 84.5wt% with leaching from its initial value by mainly removing aluminum and silicate containing minerals.
文摘Stoichiometric pure and tellurium （Te） doped indium bismuthide （InBi） were grown using the directional freezing technique in a fabricated furnace. The X-ray diffraction profiles identified the crystallinity and phase composition. The surface topographical features were observed by scanning electron microscopy and atomic force microscopy. The energy dispersive analysis by X-rays was performed to identify the atomic proportion of elements. Studies on the temperature dependence of dielectric constant （e）, loss tangent （tan6）, and AC conductivity （cry） reveal the existence of a ferroelectric phase transition in the doped material at 403 K. When InBi is doped with tellurium （4.04 at%）, a band gap of 0.20 eV can be achieved, and this is confirmed using Fourier transform infrared studies. The results thus show the conversion of semimetallic InBi to a semiconductor with the optical properties suitable for use in infrared detectors.
文摘The characterization of Indian bituminous and subbituminous coal was performed by UVVisible– NIR spectroscopy. Chemical leaching with varying concentration of hydrofluoric acid was conducted on both the samples. Electronic absorption at this region was higher for higher ranked coals. Chemical leaching increased electronic transitions in subbituminous coal with maximum transitions for HF (10%) leached samples. The absorption maximum of benzeneoxygen system was found between 235-270 nm and was showing a red shift with leaching. The characteristic naphthalene ring systems (220 & 280 nm) were masked by the absorption regions of monoaromatic rings;indicating the content of napthalenoid hydrocarbon was very low. The bands observed in the visible region (450nm) were attributed to SO2 in the sample and was showing a red shift. The weak band at the 680 nm was attributed to the Ⅱ-Ⅱ* electronic transitions of the polynuclear aromatic hydrocarbons which also showed red shift with leaching. It was found that the ash content is reduced by 87.5% & 76.2% in bituminous and subbituminous coal respectively with HF (30%) leaching.
