Optimized design and field experiment of a staggered vibrating subsoiler for conservation tillage

Soil compaction is a common problem facing conservation fields that restricts crop root growth and causes yield decrease.Subsoil techniques have been developed to break up the compaction layer.However,subsoil implement requires large draft power that hampered the development of subsoil techniques for most of developing countries due to lack of large scale tractors.Aiming to optimize the penetration resistance of the subsoiler and create a good working environment for the operators,a staggered vibrating subsoiler was developed.A new staggered vibrating mechanism was designed to generate the staggered vibration of the shanks meanwhile the V-shape shanks arrangement was adopted to keep relative balance for the subsoiler.In order to obtain optimum working parameters of the vibration frequency and forward speed,the trajectory of shanks was simulated by using the MATLAB software.The forward speed of 2-3 km/h with vibration frequency of 12 Hz was recommended to acquire an effective decrease in draft force.Field performance of this subsoiler was evaluated in terms of the draft force,power requirement and tractor wheel slippage.By comparing the two operation modes,staggered vibrating(SV)and rigid(NV)of shanks,the decrease ratios of draft force for SV were determined by 16.97%,12.12%and 9.02%at forward speeds of 2.2 km/h,2.6 km/h and 3.1 km/h,respectively.This is better than the research for the 1SZ-460 vibratory subsoiler that was decreased by 9.09%in draft force.The power requirement for SV was not significantly greater than that for NV.The obviously decreased wheel slippage was observed for SV by decrease of 12.47%,17.96%and 21.79%at forward speeds of 2.2 km/h,2.6 km/h and 3.1 km/h,respectively.In conclusion,the staggered vibrating subsoiler presents preferable working performance and is recommended to be applied in subsoil tillage process for developing countries.

Effects of tilt angle of disk plough on some soil physical properties, work rate and wheel slippage under light clay soil

Standard Disk Plough(SDP)is the integral element of traditional farming system in Middle and Northern Sudan.In SDP,the tilt angle between the planes of the cutting edge of the disk which is inclined to a vertical line may be altered according to the field conditions.Tractor drivers usually use an angle close to maximum in order to decrease the tillage depth,consequently decreasing power requirements,without considering the tillage quality and the impact on the soil properties.This experiment was conducted at the College of Agricultural Studies farm of Sudan University of Science and Technology to study the effects of three tilt angles(15°,20°and 25°)on soil bulk density,mean weight diameter,wheel slippage,work rate(or effective field capacity)and soil volume disturbed using mounted disk plough.The nature of soil on the farm found to be light clay.The theoretical forward speed was maintained at 6 km/h.The results showed that increasing tilt angle of the plough significantly(p<0.05)increased the bulk density,mean weight diameter and field capacity while significantly decreasing the tractor wheel slippage and soil volume disturbance.