Swirl Jets in Crossflow at Low Velocity Ratios

This investigation examines experimentally the behavior of swirled jets produced by axial flow fans blowing into a crossflow at low velocity ratios. The main difference with non-swirl cases is an asymmetry of the dominant kidney vortex and a slight distortion of the jet trace downstream of the injection hole. The effect of jet rotation at relatively low swirl numbers and similar velocity ratios is also investigated by a validated computational analysis tool. The numerical results are analyzed by means of various post-processing procedures, aiming to clarify, quantify and analyze the impact of swirl on the characteristics and the flow domain of a jet in crossflow. In general, swirl introduces an asymmetry in all examined quantities and prevents the penetration of the jet into the crossflow, causing the jet to remain closer to the wall surface. The rotation of the injected fluid results in an imparity of the two parts of the Counter Rotating Vortex Pair （CVP） which is no longer symmetric to the axial centerline plane. High swirl numbers result in the destruction of the CVP and the dominant kidney shape vortex is transformed into a comma shape vortex, rotating close to the wall.

Heat Transfer and Performance Characteristics of Axial Cooling Fans with Downstream Guide Vanes

This study examines experimentally the effect of stators on the performance and heat transfer characteristics of small axial cooling fans. A single fan impeller, followed by nine stator blades in the case of a complete stage, was used for all the experimental configurations. Performance measurements were carried out in a constant speed stage performance test rig while the transient liquid crystal technique was used for the heat transfer measurements. Full surface heat transfer coefficient distributions were obtained by recording the temperature history of liquid crystals on a target plate. The experimental data indicated that the results are highly affected by the flow conditions at the fan outlet. Stators can be beneficial in terms of pressure drop and efficiency, and thus more economical operation, as well as, in the local heat transfer distribution at the wake of the stator blades if the fan is installed very close to the cooling object. However, as the separation distance increases, enhanced heat transfer rate in the order of 25% is observed in the case of the fan impeller.

A Comparative Study of the Local Heat Transfer Distributions Around Various Surface Mounted Obstacles

In many engineering applications,heat transfer enhancement techniques are of vital importance in order to ensure reliable thermal designs of convective heat transfer applications.This study examines experimentally the heat transfer characteristics on the base plate around various surface mounted obstacles.Local convection coefficients are evaluated in the vicinity of each individual protruding body with great spatial resolution using the transient liquid crystal technique.Five different obstacles of constant height-to-hydraulic diameter ratio(~1.3) are considered.These include:a cylinder,a square,a triangle,a diamond and a vortex generator of delta wing shape design.The experiments were carried out over a range of freestream Reynolds numbers,based on the hydraulic diameter of each obstacle,varying from 4,000 to 13,000.The results indicate a negligible effect of the flow speed on the heat transfer topological structure and a considerable effect of the obstacle geometry on the level and distribution of heat transfer enhancement.