Searching for the Nano-Hertz Stochastic Gravitational Wave Background with the Chinese Pulsar Timing Array Data ReleaseⅠ

Observing and timing a group of millisecond pulsars with high rotational stability enables the direct detection of gravitational waves(GWs).The GW signals can be identified from the spatial correlations encoded in the times-of-arrival of widely spaced pulsar-pairs.The Chinese Pulsar Timing Array(CPTA)is a collaboration aiming at the direct GW detection with observations carried out using Chinese radio telescopes.This short article serves as a“table of contents”for a forthcoming series of papers related to the CPTA Data Release 1(CPTA DR1)which uses observations from the Five-hundred-meter Aperture Spherical radio Telescope.Here,after summarizing the time span and accuracy of CPTA DR1,we report the key results of our statistical inference finding a correlated signal with amplitude logA_(c)=-14.4_(-2.8)^(+1.0)for spectral index in the range ofα∈[-1.8,1.5]assuming a GW background(GWB)induced quadrupolar correlation.The search for the Hellings–Downs(HD)correlation curve is also presented,where some evidence for the HD correlation has been found that a 4.6σstatistical significance is achieved using the discrete frequency method around the frequency of 14 n Hz.We expect that the future International Pulsar Timing Array data analysis and the next CPTA data release will be more sensitive to the n Hz GWB,which could verify the current results.

Fluorinated soft carbon as an ultra-high energy density potassium-ion battery cathode enabled by a ternary phase K_(x)FC

Fluorinated carbons(CFx)have been widely applied as lithium primary batteries due to their ultra-high energy density.It will be a great promise if CFx can be rechargeable.In this study,we rationally tune the C-F bond strength for the alkaline intercalated CFx via importing an electronegative weaker element K instead of Li.It forms a ternary phase K_(x)FC instead of two phases(LiF+C)in lithium-ion batteries.Meanwhile,we choose a large layer distance and more defects CFx,namely fluorinated soft carbon,to accommodate K.Thus,we enable CFx rechargeable as a potassium-ion battery cathode.In detail fluorinated soft carbon CF_(1.01) presents a reversible specific capacity of 339 mA h g^(-1)(797 Wh kg^(-1))in the 2nd cycle and maintains 330 mA h g^(-1)(726 Wh kg^(-1))in the 15th cycle.This study reveals the importance of tuning chemical bond stability using different alkaline ions to endow batteries with rechargeability.This work provides good references for focusing on developing reversible electrode materials from popular primary cell configurations.

Effects of Different Flue-curing Technologies on Submicroscopic Structure of Flue-cured Tobacco Leaves

[ Objective] This study aimed to compare the effects of low-temperature low-humidity tobacco flue-curing technology, moderate-temperature moderate- humidity tobacco flue-curing technology and moderate-temperature high-humidity tobacco flue-curing technology on submicroscopic structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method] Middle leaves of tobacco cuhivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the submicroscopic structure of flue-cured tobacco leaves. [ Result] Morphology changes and structural rupture of chloroplasts occurred at different time during three flue-curing proces- ses. In low-temperature low-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred late but rapidly; in moderate-tempera- ture moderate-humidity flue-curing process and moderate-temperature high-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred early but slowly. Among these three flue-curing processes, the speed of changes in mitochondria morphology, cristae number and membrane rupture pres- ented an upward order of low-temperature low-humidity flue-curing process 〈 moderate-temperature high-humidity flue-curlng process 〈 moderate-temperature moderate-humidity flue-curing process. In low-temperature low-humldity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 36 -48 h ; in moderate-temperature moderate-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 24 - 36 h; in moderate-temperature high-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 12 - 24 h. [ Conclusion ] Using low-temperature low-humidity flue- curing technology could prolong the maintenance duration of the submicroscopic structure integrity of flue-cured tobacco leaves, which was conducive to fully decom- posing and transforming substances in tobacco leaves and obtaining high-quality flue-cured tobacco leaves.

Effects of Different Flue-curing Technologies on Microscopic Structure of Flue-cured Tobacco Leaves

[Objective] This study aimed to compare the effects of Chinese quality-improving fragrunce-increasing tobacco flue-curing technology, Chinese three- stage tobaeeo flue-curing technology and Zimbabwean tobaceo flue-euring technology on microscopie structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method ] Middle leaves of tobacco cultivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the microscopic structure of flue-cured tobaceo leaves. [ Result] During three flue-curing processes, leaves, palisade tissues and sponge tissues shrank gradually. Three flue-euring processes exhibited significant differ- ences in the peak of tissue shrinkage ： microscopic structure of flue-cured tobacco leaves in Chinese three-stage tobacco flue-curing process shrank earliest, follower by Chinese quality-improving fragrance-increasing tobacco flue-curing process; flue-eured tobacco leaves in Zimbabwean tobacco flue-curing process presented the latest shrinkage. At 84 h post-curing, leaf thickness in three flue-curing processes showed a descend order of Chinese three-stage tobacco flue-curing process 〉 Chinese quality-improving fragrance-increasing tobacco flue-curing process 〉 Zimbabwean tobacco flue-curing process. Upper and lower epidermal cells in Zimb- abwean tobacco flue-curing process ruptured earlier than other two flue-curing processes; eventually, the majority of cells ruptured and mixed with palisade tissues and sponge tissues. In Chinese quality-improving fragranee-increasing tobacco flue-curing process, only a small number of epidermal cells in dried leaves ruptured. Among three flue-curing technologies, Zimbabwean tobacco flue-curing technology exhibited the greatest damage to epidermal cells, followed by Chinese three-stage tobaceo flue-curing technology; Chinese quality-improving fragrance-increasing tobacco flue-curing technology had the minimum damage to epidermal cells. Mese- phyll cross-section exhibited significant morphological changes in stomata. To be specific, at 0 - 12 h post-curing, stomata of tobacco leaves closed with slightly prominent stamatal apparatuses on upper and lower epidermis; at 24 -72 h post-curing, stomata of tobaceo leaves changed gradually from opening to closure with significantly prominent stomatal apparatuses on upper and lower epidermis; at 84 h post-curing, stomata of tobacco leaves closed, and the majority of stomatal appa- ratuses were significantly prominent. In Chinese quality-improving fragrance-increasing tobacco flue-curing process, only a small number of epidermal ceils ruptured at 84 h pest-flue-curing; palisade tissues and sponge tissues shrank almost simultaneously. Significant gaps were observed between palisade tissues and between pal- isade tissues and sponge tissues. Chinese quality-improving fragrance-increasing tobacco flue-curing technology exhibited lower disorder level compared with other two flue-curing technologies. [ Conclusion] Chinese quality-improving fragrance-increasing tobacco flue-curlng technology was conducive to maintaining the micro- scopic structure integrity of flue-cured tobacco leaves and obtaining high-quality flue-cured tobacco leaves.

Three-Stage Six-Step Flue-Curing Technology for Viginia Tobacco Leaves and Its Application in China

In order to overcome the problem that the leaf yellowing stage in tobacco curing reduces the fragrance of the product, this study introduced the principle and key parameters of a three-stage six-step curing technology. The field trail was conducted in Wulong county of Chongqing city in 2010, and Virginia K326 was the tested cultivar. The middle leaves were harvested and plaited after maturity, and then cured with the three-stage six-step curing technology and traditional three-stage curing technology, respectively. Three replicates were established for each of the two curing technologies. Then, chemical constituents, aromatic substances and smoking quality were analyzed. The results show that compared with the traditional three-stage curing technology, the three-stage six-step curing technology produces more suitable ratios of chemical constituents, higher aromatic component content and higher smoking quality grade of tobacco leaves. Therefore, the continuous improvement of corollary equipment and matching technologies is expected to widen the applications of the three-stage six-step curing technology in tobacco and provide a strong technical support for the development of the tobacco industry.

In situ formed FeS_(2)@CoS cathode for long cycling life lithium-ion battery

Pyrite FeS_(2)exhibits an ultrahigh energy density(1671 W·h·kg^(-1),for the reaction of FeS_(2)+4Li=Fe+2Li_(2)S)in secondary lithium-ion batteries,but its poor cycling stability,huge volume expansion,the shuttle effect of polysulfides,and slow kinetic properties limit its practical application.In this work,we synthesize a composite structure material CoS on FeS_(2)surface(FeSx@CoS,1<x≤2)by using a cobalt-containing MOF to improve its cycle stability.It is found that CoS inhibits the side reactions and adsorbs polysulfides.As a result,the modified FeS_(2)shows a higher discharge capacity of 577 mA·h·g^(-1)(919 W·h·kg^(-1))after 60 cycles than 484 mA·h·g^(-1)(778 W·h·kg^(-1))of bare pyrite FeS_(2).This efficient strategy provides a valuable step toward the realization of high cycling stability FeS_(2)cathode materials for secondary lithium-ion batteries and enriches the basic understanding of the influence of FeS_(2)interfacial stability on its electrochemical performances.