Progress in the application of polymer fibers in solid electrolytes for lithium metal batteries

Solid state lithium metal batteries(SSLMBs)are considered to be one of the most promising battery systems for achieving high energy density and excellent safety for energy storage in the future.However,current existed solid-state electrolytes(SSEs)are still difficult to meet the practical application requirements of SSLMBs.In this review,based on the analysis of main problems and challenges faced by the development of SSEs,the ingenious application and latest progresses including specific suggestions of various polymer fibers and their membrane products in solving these issues are emphatically reviewed.Firstly,the inherent defects of inorganic and organic electrolytes are pointed out.Then,the application strategies of polymer fibers/fiber membranes in strengthening strength,reducing thickness,enhancing thermal stability,increasing the film formability,improving ion conductivity and optimizing interface stability are discussed in detail from two aspects of improving physical structure properties and electrochemical performances.Finally,the researches and development trends of the intelligent applications of high-performance polymer fibers in SSEs is prospected.This review intends to provide timely and important guidance for the design and development of polymer fiber composite SSEs for SSLMBs.

Advanced preparation and application of bimetallic materials in lithium-sulfur batteries:A review

Lithium-sulfur(Li-S)batteries are considered highly promising as next-generation energy storage systems due to high theoretical capacity(2600 Wh kg^(-1))and energy density(1675 mA h g^(-1))as well as the abundant natural reserves,low cost of elemental sulfur,and environmentally friendly properties.However,several challenges impede its commercialization including low conductivity of sulfur itself,the severe“shuttle effect”caused by lithium polysulfides(LiPSs)during charge–discharge processes,volume expansion effects and sluggish reaction kinetics.As a solution,polar metal particles and their compounds have been introduced as the main hosts for sulfur cathode due to their robust catalytic activity and adsorption capability,effectively suppressing the“shuttle effect”of Li PSs.Bimetallic alloys and their compounds with multi-functional properties exhibit remarkable electrochemical performance more readily when compared to single-metal materials.Well-designed bimetallic materials demonstrate larger specific surface areas and richer active sites,enabling simultaneous high adsorption capability and strong catalytic properties.The synergistic effect of the“adsorption-catalysis”sites accelerates the adsorptiondiffusion-conversion process of Li PSs,ultimately achieving a long-lasting Li-S battery.Herein,the latest progress and performance of bimetallic materials in cathodes,separators,and interlayers of Li-S batteries are systematically reviewed.Firstly,the principles and challenges of Li-S batteries are briefly analyzed.Then,various mechanisms for suppressing“shuttle effects”of Li PSs are emphasized at the microscale.Subsequently,the performance parameters of various bimetallic materials are comprehensively summarized,and some improvement strategies are proposed based on these findings.Finally,the future prospects of bimetallic materials are discussed,with the hope of providing profound insights for the rational design and manufacturing of high-performance bimetallic materials for LSBs.

Design,preparation,application of advanced array structured materials and their action mechanism analyses for high performance lithium-sulfur batteries

Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.

Recent advances of carbon fiber-based self-supported electrocatalysts in oxygen electrocatalysis

Oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) are the key reactions in numerous renewable energy devices. Unlike conventional powdered catalysts, self-supported catalysts are extensively employed in oxygen electrocatalysis because of the enhanced electron-transfer rate, high specific surface area, and superior mechanical flexibility. Among the self-supported conductive substrates, carbon fiber usually exhibits several distinctive advantages, such as a straightforward preparation process, relatively low cost, good stability, and excellent conductivity. Against this background,carbon fiber-based self-supported electrocatalysts have been widely applied and studied in oxygen electrocatalysis, indicating a promising development direction in oxygen electrocatalyst research.Thus, it is essential to offer an overall summary of the research progress in this field to facilitate its subsequent development. Taking the regulatory mechanisms and modification methods as a starting point, this review comprehensively summarizes recent research on carbon fiber-based self-supported electrocatalysts in recent years. Firstly, a brief overview of the synthesis methods and regulatory mechanisms of carbon fiber-based self-supported electrocatalysts is given. Furthermore, the view also highlights the modification methods and research progress of self-supported electrocatalysts synthesized on carbon fiber-based substrates in recent years in terms of different dopant atoms. Finally, the prospects for the application of self-supported electrocatalysts based on carbon fiber in oxygen electrocatalysis and the possible future directions of their development are presented. This review summarizes recent developments and applications of self-supported bi-functional electrocatalysts with carbon fiber-based materials as the conducting substrate in oxygen electrocatalysis. It also lays a robust scientific foundation for the subsequent reasonable design of highly effective carbon fiber-based self-supported electrocatalysts.

Health Effects of Extreme Low Temperatures and Cold Waves on Respiratory Diseases

Climate change is the most significant threat to public health and exerts myriad influences on health,including the occurrence of extreme temperature events.Studies have demonstrated that populations will experience significantly severe cold waves in the future^([1]),increasing the risk of respiratory diseases.

高压条件下聚对苯二甲酸丁二醇酯熔体的流变行为

利用毛细管流变仪及反向压力腔组件研究了高压条件下温度、压力和剪切速率等因素对聚对苯二甲酸丁二醇酯(PBT)熔体的流变行为影响规律。结果表明,随着温度的升高,PBT熔体的剪切黏度呈现不同程度的下降趋势,且温度较高时剪切黏度下降幅度增大;PBT熔体剪切黏度的温度敏感性在高剪切下显著减弱,在高压下缓慢增强;PBT熔体剪切黏度随压力的增大呈指数增加,符合Barus方程;在相同温度、相同剪切速率下,随着压力的增加,PBT熔体剪切黏度逐渐增大;PBT熔体剪切黏度随着剪切速率的增加逐渐降低,表现出典型的"剪切变稀"假塑性流体现象。

压力场中高黏聚对苯二甲酸乙二醇酯的流变行为

利用毛细管流变仪及反向压力腔组件研究了压力场下高黏聚对苯二甲酸乙二醇酯(PET)熔体的流变行为。结果表明,随着剪切速率的增加,高黏PET熔体剪切黏度逐渐降低,表现出明显的“切力变稀”行为,是一种典型的假塑性流体;随着熔体所受压力的增加,高黏PET熔体剪切黏度呈指数增长增加,变化规律符合Barus方程;随着温度的升高,高黏PET熔体的剪切黏度逐渐减小;高黏PET熔体的换算因子为3.4,压力增加与温度下降对剪切黏度的贡献是等效的。高黏PET熔体为非牛顿流体,随着温度的逐渐升高,高黏PET熔体非牛顿指数逐渐增大,高黏PET熔体的流动行为逐渐接近牛顿流体特性。高黏PET熔体的剪切黏度-温度依赖性随压力的增加逐渐增强;高黏PET熔体的剪切黏度的温度敏感性随剪切速率的增加逐渐降低。随着剪切速率增加和温度升高,高黏PET熔体剪切黏度对压力的依赖性逐渐降低。

Polomaxer188~复合聚L-乳酸电纺纤维的制备及表征

考察了二氯甲烷为溶剂,Poloxamer188~复合聚L-乳酸均相溶液电纺纤维的形态及复合情况。将系列不同百分比的Poloxamer188~与聚L-乳酸共同溶解在二氯甲烷中制备成均相溶液后静电纺丝,扫描电子显微镜表征纤维的形态,X射线衍射和差示扫描量热分析表征两者的复合状况。络合显色-分光光度法测定从纤维中释放的Poloxamer188~量,并对时间做累积释放百分率图,采用Freundlich方程式对释放曲线进行拟合。得到了一系列直径较为均一的、无珠子的微米级纤维,随着Poloxamer188~复合量的增大,纤维直径先增加后减小。当Poloxamer188~的百分含量达到25%时,X射线图谱上开始出现其特征峰,差示扫描量热分析未见其吸热峰。Poloxamer188~从纤维中有明显突释,随后有约48 h的缓释期,之后几乎无释放。Poloxamer188~在纤维中的相对百分含量越高,其每个时间点的释放量也越大。其释放曲线符合Freundlich方程式。经过Poloxamer188~复合,可得到直径均一的无珠子结构的聚L-乳酸电纺纤维,Poloxamer188~可从纤维中以逆吸附形式释放。

High-performance all-solid-state polymer electrolyte with fast conductivity pathway formed by hierarchical structure polyamide 6 nanofiber for lithium metal battery

The utilization of all-solid-state electrolytes is considered to be an effective way to enhance the safety performance of lithium metal batteries.However,the low ionic conductivity and poor interface compatibility greatly restrict the development of all-solid-state battery.In this study,a composite electrolyte combining the electrospun polyamide 6(PA6)nanofiber membrane with hierarchical structure and the polyethylene oxide(PEO)polymer is investigated.The introduction of PA6 nanofiber membrane can effectively reduce the crystallinity of the polymer,so that the ionic conductivity of the electrolyte can be enhanced.Moreover,it is found that the presence of finely branched fibers in the hierarchical structure PA6 membrane allows the polar functional groups(C=O and N-H bonds)to be fully exposed,which provides sufficient functional sites for lithium ion transport and helps to regulate the uniform deposition of lithium metal.Moreover,the hierarchical structure can enhance the mechanical strength(9.2 MPa)of the electrolyte,thereby effectively improving the safety and cycle stability of the battery.The prepared Li/Li symmetric battery can be stably cycled for 1500 h under 0.3 mA cm^(-2) and 60℃.This study demonstrates that the prepared electrolyte has excellent application prospects in the next generation all-solid-state lithium metal batteries.

Fabrication and catalytic behavior of hierarchically-structured nylon 6 nanofiber membrane decorated with silver nanoparticles

A hierarchically‐structured nylon 6 (PA6) nanofiber membrane decorated with silver nanoparticles (Ag NPs) was fabricated by electrospinning and impregnation methods. The as‐fabricated hierarchically‐structured Ag/PA6 nanofiber membrane (HS‐Ag/PA6 NM) exhibits a morphology in which Ag NPs are deposited on the surfaces of both thick fibers and thin fibers. The content and size of theAg NPs can be controlled by varying the concentration of the silver colloid solution. Compared with the non‐hierarchically‐structured Ag/PA6 nanofiber membrane, HS‐Ag/PA6 NM has a higher specificsurface area and exhibits a higher degradation rate for methylene blue of 81.8%–98.1% within2 h. HS‐Ag/PA6 NM can be easily recycled and exhibits good reusability. It retains a degradation rate for methylene blue of 83.5% after five consecutive cycles. The hierarchically‐structured nanofiber membrane is therefore a potential nanocatalyst.

Mg-based inorganic nanofibers constructing fast and multi-dimensional ion conductive pathways for all-solid-state lithium metal batteries

Solid-state electrolytes(SSEs),which replace flammable and toxic liquid electrolytes,have attracted widely attention.However,there exist still some challenges in actual application such as poor interfacial compatibility and slow ionic migration.In this study,Mg O nanofibers and MgF;nanofibers were prepared via the electro-blow spinning and high-temperature calcination methods,and were applied to all-solid-state lithium metal batteries for the first time.The organic-inorganic composite SSEs exhibited continuous conduction paths based on the virtue of the nanofibers with high length-to-diameter ratio,which were designed and prepared by mixing prepared fillers into the poly(ethylene oxide)(PEO)/lithium bis(trifluoromethane)sulfonilimide(Li TFSI)system.The effect of filler with different morphologies,doping ratios and component on ionic conductivity,electrochemical stability and cycle performance were explored under two kinds of[EO]/[Li^(+)]ratios and ambient temperatures.The ionic conductivities of electrolytes containing Mg O and MgF;nanofibers can reach up to 1.19×10^(-4) and 1.39×10^(-4) S cm^(-1) at 30℃,respectively.They were attributed to specific ionic conductive enhancement at the organicinorganic interface,reduced crystallinity and Lewis acid interaction,which can effectively promote the dissociation of the lithium salts.Especially MgF_(2) nanofiber,combining low electronic conductance,excellent electrochemical stability and outstanding inhibition for lithium dendrites of fluorides,endowed the battery with an initial specific capacity of 140.6 m Ah g^(-1) and capacity decay rate per cycle of 0.055%after500 cycles at 50℃.The work can provide an idea to design SSE with fast and multi-dimensional Li conductive paths and excellent interfacial compatibility.

A review on electronically conducting polymers for lithium-sulfur battery and lithium-selenium battery:Progress and prospects

Lithium-sulfur(Li-S) batteries and lithium-selenium(Li-Se) batteries,as environmental protection energy storage systems with outstanding theoretical specific capacities and high energy densities,have become the hotspots of current researches.Besides,elemental S(Se) raw materials are widely sourced and their production costs are both low,which make them considered one of the new generations of high energy density electrochemical energy storage systems with the most potential for development.However,poor conductivity of elemental S/Se and the notorious "shuttle effect" of lithium polysulfides(polyselenides) severely hinder the commercialization of Li-S/Se batteries.Thanks to the excellent electrical conductivity and strong absorption of lithium polysulfide(polyselenide) about electronically conducting polymer,some of the above thorny problems have been effectively alleviated.The review presents the fundamental studies and current development trends of common electronically conducting polymers in various components of Li-S/Se batteries,which involves polyaniline(PANI) polypyrrole(PPy),and polythiophene(PTh) with its derivatives,e.g.polyethoxythiophene(PEDOT) and poly(3,4-ethylene dioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS).Finally,the review not only summarizes the research directions and challenges facing the application of electronically conducting polymers,but also looks forward to the development prospects of them,which will provide a way for the practical use of electronically conducting polymers in Li-S/Se batteries with outstanding electrochemical properties in the short run.

A versatile nano-TiO_(2) decorated gel separator with derived multi-scale nanofibers towards dendrite-blocking and polysulfide-inhibiting lithium-metal batteries

In this study,a versatile fluorine-bearing gel membrane with multi-scale nanofibers was rationally designed and synthesized via facile one-step blend electrospinning of nano-titanium dioxide(TiO_(2))particles and fluorinated poly-m-phenyleneisophthalamide(PMIA)polymer solution.The prepared multiscale TiO_(2)-assisted gel separator presented relatively high porosity,small aperture,giving rise to superior affinity to electrolyte and sufficient active sites to accelerate lithium ions migration.Meanwhile,the asfabricated multifunctional GPE also rendered outstanding heat-resistance and well-distributed lithiumions flux,and the mutual overlaps between the coarse fibers and the fine fibers within the multi-scale nanofiber membrane provided a strong skeleton support,which in turn laid a solid footing stone for high-security and dendrite-proof batteries.Particularly,the nano-TiO_(2) particles within PMIA membrane acted as"gatekeepers",which can not only resist the growth of lithium dendrites,but also intercept the dissolved polysulfide on cathode side.Based on these merits,the gel PMIA-based lithium cobalt(LCO)/lithium battery obtained the remarkably improved rate capability and cycle performances on account of superior ionic conductivity,steady anodic stability window and weakened polarization behavior.Meanwhile,the resultant lithium-sulfur cell also delivered the outstanding cycling stability with the aid of the greatly prevented"shuttle effect"of dissolved lithium polysulfides based on the physical trapping and chemical binding of the prepared GPE to polysulfides species.This work proved that the addition of functional inorganic nanoparticles similar with TiO_(2) in multi-scale gel PMIA membrane can enhance the lithium ions transport capability,resist the growth of lithium dendrites as well as inhibit the shuttle effect of polysulfides,which would prompt a great development for dendrite-blocking and polysulfideinhibiting lithium-metal cells.

Rational design of hollow oxygen deficiency-enriched NiFe_(2)O_(4)@N/rGO as bifunctional electrocatalysts for overall water splitting

Bimetallic metal organic framework(MOF)as a precursor to prepare catalysts with bifunctional catalytic activity of oxygen evolution reaction(OER)and hydrogen evolution reaction(HER)attracts more and more attention.Herein,hollow oxygen deficiency-enriched NiFe_(2)O_(4) is synthesized by pyrolytic FeNi bimetallic MOF.The defects of rGO during carbonization can act as nucleation sites for FeNi particles.After nucleation and N doping,the FeNi particles were served as catalysts for the deposition of dissolved carbon in the defects of the N/rGO.These deposited carbon,like a bridge,connect N/rGO and hollow oxygen deficiency-enriched NiFe_(2)O_(4) together,which giving full play to the advantages of N/rGO in fast electron transfer,thereby improving its catalytic activity.The resultant NiFe_(2)O_(4)@N/rGO-800 exhibits a low overpotential of 252 mV at 20 mA cm^(-2) for OER and 157 mV at 10 mA cm^(-2) for HER in 1 M KOH,respectively.When used as bifunctional electrodes for overall water splitting,it also shows low cell voltage of 1.60 V and 1.67 V at 10 and 20 mA cm^(-2),respectively.

Highly stable aqueous rechargeable Zn-ion battery:The synergistic effect between NaV_(6)O_(15) and V_(2)O_(5) in skin-core heterostructured nanowires cathode

The aqueous rechargeable Zn-ion batteries based on the safe,low cost and environmental benignity aqueous electrolytes are one of the most compelling candidates for large scale energy storage applications.However,pursuing suitable insertion materials may be a great challenge due to the strong electrostatic interaction between Zn^(^(2+))and cathode materials.Hence,a novel NaV_(6)O_(15)/V_(2)O_(5) skin-core heterostructure nanowire is reported via a one-step hydrothermal method and subsequent calcination for high-stable aqueous Zn-ion batteries(ZIBs).The NaV_(6)O_(15)/V_(2)O_(5) cathode delivers high specific capacity of 390 m Ah/g at 0.3 A/g and outstanding cycling stability of 267 m Ah/g at 5 A/g with high capacity retention over 92.3%after 3000 cycles.The superior electrochemical performances are attributed to the synergistic effect of skin-core heterostructured NaV_(6)O_(15)/V_(2)O_(5),in which the sheath of NaV_(6)O_(15) possesses high stability and conductivity,and the V_(2)O_(5) endows high specific capacity.Besides,the heterojunction structure not only accelerates intercalation kinetics of Zn^(2+)transport but also further consolidates the stability of the layers of V_(2)O_(5) during the cyclic process.This work provides a new perspective in developing feasible insertion materials for rechargeable aqueous ZIBs.

Optimized CeO_(2) Nanowires with Rich Surface Oxygen Vacancies Enable Fast Li-Ion Conduction in Composite Polymer Electrolytes

Low-cost and flexible solid polymer electrolytes are promising in all-solid-state Li-metal batteries with high energy density and safety.However,both the low room-temperature ionic conductivities and the small Li^(+)transference number of these electrolytes significantly increase the internal resistance and overpotential of the battery.Here,we introduce Gd-doped CeO_(2) nanowires with large surface area and rich surface oxygen vacancies to the polymer electrolyte to increase the interaction between Gd-doped CeO_(2) nanowires and polymer electrolytes,which promotes the Li-salt dissociation and increases the concentration of mobile Li ions in the composite polymer electrolytes.The optimized composite polymer electrolyte has a high Li-ion conductivity of 5×10^(-4)4 S cm^(-1) at 30℃ and a large Li+transference number of 0.47.Moreover,the composite polymer electrolytes have excellent compatibility with the metallic lithium anode and high-voltage LiNi_(0.8)Mn _(0.1)Co_(0.1)O_(2)(NMC)cathode,providing the stable cycling of all-solid-state batteries at high current densities.

Advances in preparation methods and mechanism analysis of layered double hydroxide for lithium-ion batteries and lithium-sulfur batteries

Lithium-ion(Li-ion) battery and lithium-sulfur(Li-S) battery have attracted significant attention as promising components for large-scale energy storage because of high theoretical capacity of Li,excellent energy density or environmental friendness for two kinds of batteries.However,there still exist some respective obstacles for commercial applications,such as limited theoretical capacity,high cost and low conductivity of Li-ion cells or shuttle effect of lithium polysulfides of Li-S cells.As typical twodimensional materials,layered double hydroxides(LDHs) exhibit excellent potential in the field of energy storage due to facile tunability of composition,structure and morphology as well as convenient composite and strong catalytic properties.Consequently,various LDHs toward novel separators or interlayers,cathodes,anodes,and interesting catalytic templates are researched to resolve these challenges.In this review,the recent progress for LDHs applied in Li-ion batteries and Li-S batteries including the synthesis methods,designs and applications is presented and reviewed.Meanwhile,the existing challenges and future perspectives associated with material designs and practical applications of LDHs for these two classes of cells are discussed.WeWe hope that the review can attract more attention and inspire more profound researches toward the LDH-based electrochemical materials for energy storage.

The action mechanisms and structures designs of F-containing functional materials for high performance oxygen electrocatalysis

Non-renewable fossil fuels have led to serious problems such as global warming,environmental pollution,etc.Oxygen electrocatalysis including oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)plays a central role in clean energy conversion,enabling a number of sustainable processes for future air battery technologies.Fluorine,as the most electronegative element(4.0)not only can induce more efficient regulation for the electronic structure,but also can bring more abundant defects and other novel effects in materials selection and preparation for favorable catalysis with respect to the other nonmetal elements.However,an individual and comprehensive overview of fluorine-containing functional materials for oxygen electrocatalysis field is still blank.Therefore,it is very meaningful to review the recent progresses of fluorine-containing oxygen electrocatalysts.In this review,we first systematically summarize the controllable preparation methods and their possible development directions based on fluorine-containing materials from four preparation methods.Due to the strong electron-withdrawing properties of fluorine,its control of the electronic structure can effectively enhance the oxygen electrocatalytic activity of the materials.In addition,the catalytic enhancement effect of fluorine on carbonbased materials also includes the prevent oxidation and the layer peeling,and realizes the precise atomic control.And the catalytic improvement mechanism of fluorine containing metal-based compounds also includes the hydration of metal site,the crystal transformation,and the oxygen vacancy induction.Then,based on their various dimensions(0D–3D),we also have summarized the advantages of different morphologies on oxygen electrocatalytic performances.Finally,the prospects and possible future researching direction of F-containing oxygen electrocatalysts are presented(e.g.,novel pathways,advanced methods for measurement and simulation,field assistance and multi-functions).The review is considered valuable and helpful in exploring the novel designs and mechanism analyses of advanced fluorine-containing electrocatalysts.

3D spiny AlF_(3)/Mullite heterostructure nanofiber as solid-state polymer electrolyte fillers with enhanced ionic conductivity and improved interfacial compatibility

Lithium metal batteries assembled with solid-state electrolyte can offer high safety and volumetric energy density compared to liquid electrolyte.The polymer solid-state electrolytes of poly(ethylene oxide)(PEO)are widely used in lithium metal solid-state batteries due to their unique properties.However,there are still some defects such as low ionic conductivity at room temperature and weak inhibition of lithium dendrite growth.Herein,the spiny inorganic nanofibers heterostructure with mullite whiskers grown on the surface of aluminum fluoride(AlF_(3))nanofibers are introduced into the PEOLi TFSI electrolytes for the first time to prepare composite solid-state electrolytes.The AlF_(3)as a strong Lewis acid can adsorb anions and promote the dissociation of Li salts.Besides,the specially threedimensional(3D)structure enlarges the effective contacting interface with the PEO polymer,which allows the lithium ions to be transported not only along the large aspect ratio of AlF3nanofibers,but also along the mullite phase in the transmembrane direction rapidly.Thereby,the transport channel of lithium ions at the spiny inorganic nanofibers-polymer interface is further improved.Benefiting from these advantages,the obtained composite solid-state electrolyte has a high ionic conductivity of 1.58×10^(-4)S cm^(-1)at 30℃and the lithium ions transfer number of 0.53.In addition,the AlF3has strong binding energy with anions,low electronic conductivity and wide electrochemical stability window,and reduced nucleation overpotential of lithium during cycling,which is positive for lithium dendrite suppression in solid-state electrolytes.Thus,the assembled symmetric Li/Li symmetric batteries exhibit stable cycling performance at different area capacities of 0.15,0.2,0.3 and 0.4 m A h cm^(-2).More importantly,the LiFePO_(4)(LFP)/Li battery still has 113.5 m A h g-1remaining after 400 cycles at 50℃and the Coulomb efficiency is nearly 100%during the long cycle.Overall,the interconnected structure of 3D spiny inorganic heterostructure nanofiber constitutes fast and uninterrupted lithium ions transport channels,maximizing the synergistic effect of interfacial transport of inorganic fillers and reducing PEO crystallinity,thus providing a novel approach to high performance solid-state electrolytes.

Enhanced ionic conductivity in a novel composite electrolyte based on Gd-doped SnO_(2) nanotubes for ultra-long-life all-solid-state lithium metal batteries

All-solid-state electrolytes are exceedingly attractive because of the outstanding inherent safety and energy density compared to liquid electrolytes.Whereas,it is still formidable to simultaneously design solid electrolytes with favorable electrode/electrolyte interface compatibility and high ionic conductivity in a simple and scalable manner.Hence,the oxygen-vacancy-rich Gd-doped SnO_(2) nanotubes(GDS NTs)are innovatively prepared and applied to the electrolyte of all-solid-state lithium metal batteries for the first time.The addition of GDS NTs can validly construct long-range co ntinuous ion transport networks in the poly(ethylene oxide)(PEO)-based system and greatly improve the mechanical properties of the electrolyte.Compared to the PEO-based electrolyte,the composite electrolyte displays a higher lithium ion conductivity of 2.41×10^(-4) S cm^(-1) at 30℃,a higher lithium ion transference number up to 0.62 and a wider electrochemical window of 5 V at 50℃.In addition,the composite electrolyte manifests outstanding compatibility with high-voltage LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)cathode,LiFePO4 cathode and lithium metal anode.The assembled Li/Li symmetric battery exhibits stable Li plating/stripping cycling performance,which can cycle steadily for 1500 h at a capacity of 0.3 mA h cm^(-2).And Li/LiFePO4 battery still maintains a high capacity of 131.54 mA h g^(-1) at 0.5C after 800 cycles,which has a superior capacity retention rate of 93.2%.The obtained novel composite electrolyte has promising application prospects in the field of all-solid-state lithium metal cells.