Grindability Evaluation of Ultrasonic Assisted Grinding of Silicon Nitride Ceramic Using Minimum Quantity Lubrication Based SiO_(2)Nanofluid

Minimum quantity Lubrication(MQL)is a sustainable lubrication system that is famous in many machining systems.It involve the spray of an infinitesimal amount of mist-like lubricants during machining processes.The MQL system is affirmed to exhibit an excellent machining performance,and it is highly economical.The nanofluids are understood to exhibit excellent lubricity and heat evacuation capability,compared to pure oil-based MQL system.Studies have shown that the surface quality and amount of energy expended in the grinding operations can be reduced considerably due to the positive effect of these nanofluids.This work presents an experimental study on the tribological performance of SiO_(2)nanofluid during grinding of Si_(3)N_(4)ceramic.The effect different grinding modes and lubrication systems during the grinding operation was also analyzed.Different concentrations of the SiO_(2)nanofluid was manufactured using canola,corn and sunflower oils.The quantitative evaluation of the grinding process was done based on the amount of grinding forces,specific grinding energy,frictional coefficient,and surface integrity.It was found that the canola oil exhibits optimal lubrication performance compared to corn oil,sunflower oil,and traditional lubrication systems.Additionally,the introduction of ultrasonic vibrations with the SiO_(2)nanofluid in MQL system was found to reduce the specific grinding energy,normal grinding forces,tangential grinding forces,and surface roughness by 65%,57%,65%,and 18%respectively.Finally,regression analysis was used to obtain an optimum parameter combinations.The observations from this work will aid the smooth transition towards ecofriendly and sustainable machining of engineering ceramics.

Topography Modeling of Surface Grinding Based on Random Abrasives and Performance Evaluation

The surface morphology and roughness of a workpiece are crucial parameters in grinding processes.Accurate prediction of these parameters is essential for maintaining the workpiece’s surface integrity.However,the randomness of abrasive grain shapes and workpiece surface formation behaviors poses significant challenges,and accuracy in current physical mechanism-based predictive models is needed.To address this problem,by using the random plane method and accounting for the random morphology and distribution of abrasive grains,this paper proposes a novel method to model CBN grinding wheels and predict workpiece surface roughness.First,a kinematic model of a single abrasive grain is developed to accurately capture the three-dimensional morphology of the grinding wheel.Next,by formulating an elastic deformation and formation model of the workpiece surface based on Hertz theory,the variation in grinding arc length at different grinding depths is revealed.Subsequently,a predictive model for the surface morphology of the workpiece ground by a single abrasive grain is devised.This model integrates the normal distribution model of abrasive grain size and the spatial distribution model of abrasive grain positions,to elucidate how the circumferential and axial distribution of abrasive grains influences workpiece surface formation.Lastly,by integrating the dynamic effective abrasive grain model,a predictive model for the surface morphology and roughness of the grinding wheel is established.To examine the impact of changing the grit size of the grinding wheel and grinding depth on workpiece surface roughness,and to validate the accuracy of the model,experiments are conducted.Results indicate that the predicted three-dimensional morphology of the grinding wheel and workpiece surfaces closely matches the actual grinding wheel and ground workpiece surfaces,with surface roughness prediction deviations as small as 2.3%.

Milling Force Model for Aviation Aluminum Alloy: Academic Insight and Perspective Analysis

Aluminum alloy is the main structural material of aircraft,launch vehicle,spaceship,and space station and is processed by milling.However,tool wear and vibration are the bottlenecks in the milling process of aviation aluminum alloy.The machining accuracy and surface quality of aluminum alloy milling depend on the cutting parameters,material mechanical properties,machine tools,and other parameters.In particular,milling force is the crucial factor to determine material removal and workpiece surface integrity.However,establishing the prediction model of milling force is important and difficult because milling force is the result of multiparameter coupling of process system.The research progress of cutting force model is reviewed from three modeling methods:empirical model,finite element simulation,and instantaneous milling force model.The problems of cutting force modeling are also determined.In view of these problems,the future work direction is proposed in the following four aspects:(1)high-speed milling is adopted for the thin-walled structure of large aviation with large cutting depth,which easily produces high residual stress.The residual stress should be analyzed under this particular condition.(2)Multiple factors(e.g.,eccentric swing milling parameters,lubrication conditions,tools,tool and workpiece deformation,and size effect)should be considered comprehensively when modeling instantaneous milling forces,especially for micro milling and complex surface machining.(3)The database of milling force model,including the corresponding workpiece materials,working condition,cutting tools(geometric figures and coatings),and other parameters,should be established.(4)The effect of chatter on the prediction accuracy of milling force cannot be ignored in thin-walled workpiece milling.(5)The cutting force of aviation aluminum alloy milling under the condition of minimum quantity lubrication(mql)and nanofluid mql should be predicted.

Vegetable Oil-Based Nanolubricants in Machining:From Physicochemical Properties to Application

Cutting fluid is crucial in ensuring surface quality and machining accuracy during machining.However,traditional mineral oil-based cutting fluids no longer meet modern machining’s health and environmental protection require-ments.As a renewable,pollution-free alternative with excellent processing characteristics,vegetable oil has become an inevitable replacement.However,vegetable oil lacks oxidation stability,extreme pressure,and antiwear proper-ties,which are essential for machining requirements.The physicochemical characteristics of vegetable oils and the improved methods’application mechanism are not fully understood.This study aims to investigate the effects of viscosity,surface tension,and molecular structure of vegetable oil on cooling and lubricating properties.The mechanisms of autoxidation and high-temperature oxidation based on the molecular structure of vegetable oil are also discussed.The study further investigates the application mechanism and performance of chemical modification and antioxidant additives.The study shows that the propionic ester of methyl hydroxy-oleate obtained by epoxidation has an initial oxidation temperature of 175℃.The application mechanism and extreme pressure performance of conventional extreme pressure additives and nanoparticle additives were also investigated to solve the problem of insufficient oxidation resistance and extreme pressure performance of nanobiological lubricants.Finally,the study discusses the future prospects of vegetable oil for chemical modification and nanoparticle addition.The study provides theoretical guidance and technical support for the industrial application and scientific research of vegetable oil in the field of lubrication and cooling.It is expected to promote sustainable development in the manufacturing industry.

Tribological Performance of Different Concentrations of Al_(2)O_(3)Nanofluids on Minimum Quantity Lubrication Milling

Nanofluid minimum quantity lubrication(NMQL)is a green processing technology.Cottonseed oil is suitable as base oil because of excellent lubrication performance,low freezing temperature,and high yield.Al_(2)O_(3)nanoparticles improve not only the heat transfer capacity but also the lubrication performance.The physical and chemical proper-ties of nanofluid change when Al_(2)O_(3)nanoparticles are added.However,the effects of the concentration of nanofluid on lubrication performance remain unknown.Furthermore,the mechanisms of interaction between Al_(2)O_(3)nanoparti-cles and cottonseed oil are unclear.In this research,nanofluid is prepared by adding different mass concentrations of Al_(2)O_(3)nanoparticles(0,0.2%,0.5%,1%,1.5%,and 2%wt)to cottonseed oil during minimum quantity lubrication(MQL)milling 45 steel.The tribological properties of nanofluid with different concentrations at the tool/workpiece interface are studied through macro-evaluation parameters(milling force,specific energy)and micro-evaluation parameters(surface roughness,micro morphology,contact angle).The result show that the specific energy is at the minimum(114 J/mm^(3)),and the roughness value is the lowest(1.63μm)when the concentration is 0.5 wt%.The surfaces of the chip and workpiece are the smoothest,and the contact angle is the lowest,indicating that the tribological proper-ties are the best under 0.5 wt%.This research investigates the intercoupling mechanisms of Al_(2)O_(3)nanoparticles and cottonseed base oil,and acquires the optimal Al_(2)O_(3)nanofluid concentration to receive satisfactory tribological properties.

Electrostatic atomization minimum quantity lubrication machining:from mechanism to application

Metal cutting fluids(MCFs)under flood conditions do not meet the urgent needs of reducing carbon emission.Biolubricant-based minimum quantity lubrication(MQL)is an effective alternative to flood lubrication.However,pneumatic atomization MQL has poor atomization properties,which is detrimental to occupational health.Therefore,electrostatic atomization MQL requires preliminary exploratory studies.However,systematic reviews are lacking in terms of capturing the current research status and development direction of this technology.This study aims to provide a comprehensive review and critical assessment of the existing understanding of electrostatic atomization MQL.This research can be used by scientists to gain insights into the action mechanism,theoretical basis,machining performance,and development direction of this technology.First,the critical equipment,eco-friendly atomization media(biolubricants),and empowering mechanisms of electrostatic atomization MQL are presented.Second,the advanced lubrication and heat transfer mechanisms of biolubricants are revealed by quantitatively comparing MQL with MCF-based wet machining.Third,the distinctive wetting and infiltration mechanisms of electrostatic atomization MQL,combined with its unique empowering mechanism and atomization method,are compared with those of pneumatic atomization MQL.Previous experiments have shown that electrostatic atomization MQL can reduce tool wear by 42.4%in metal cutting and improve the machined surface Ra by 47%compared with pneumatic atomization MQL.Finally,future development directions,including the improvement of the coordination parameters and equipment integration aspects,are proposed.

Biological Stability of Water-Based Cutting Fluids:Progress and Application

The application of cutting fluid in the field of engineering manufacturing has a history of hundreds of years,and it plays a vital role in the processing efficiency and surface quality of parts.Among them,water-based cutting fluid accounts for more than 90%of the consumption of cutting fluid.However,long-term recycling of water-based cutting fluid could easily cause deterioration,and the breeding of bacteria could cause the cutting fluid to fail,increase manufacturing costs,and even endanger the health of workers.Traditional bactericides could improve the biological stability of cutting fluids,but they are toxic to the environment and do not conform to the development trend of low-carbon manufacturing.Low-carbon manufacturing is inevitable and the direction of sustainable manufacturing.The use of nanomaterials,transition metal complexes,and physical sterilization methods on the bacterial cell membrane and genetic material could effectively solve this problem.In this article,the mechanism of action of additives and microbial metabolites was first analyzed.Then,the denaturation mechanism of traditional bactericides on the target protein and the effect of sterilization efficiency were summarized.Further,the mechanism of nanomaterials disrupting cell membrane potential was discussed.The effects of lipophilicity and the atomic number of transition metal complexes on cell membrane penetration were also summarized,and the effects of ultraviolet rays and ozone on the destruction of bacterial genetic material were reviewed.In other words,the bactericidal performance,hazard,degradability,and economics of various sterilization methods were comprehensively evaluated,and the potential development direction of improving the biological stability of cutting fluid was proposed.

Tribological Mechanism of Graphene and Ionic Liquid Mixed Fluid on Grinding Interface under Nanofluid Minimum Quantity Lubrication

Graphene has superhigh thermal conductivity up to 5000 W/(m·K),extremely thin thickness,superhigh mechanical strength and nano-lamellar structure with low interlayer shear strength,making it possess great potential in mini-mum quantity lubrication(MQL)grinding.Meanwhile,ionic liquids(ILs)have higher thermal conductivity and better thermal stability than vegetable oils,which are frequently used as MQL grinding fluids.And ILs have extremely low vapor pressure,thereby avoiding film boiling in grinding.These excellent properties make ILs also have immense potential in MQL grinding.However,the grinding performance of graphene and ionic liquid mixed fluid under nano-fluid minimum quantity lubrication(NMQL),and its tribological mechanism on abrasive grain/workpiece grinding interface,are still unclear.This research firstly evaluates the grinding performance of graphene and ionic liquid mixed nanofluids(graphene/IL nanofluids)under NMQL experimentally.The evaluation shows that graphene/IL nanofluids can further strengthen both the cooling and lubricating performances compared with MQL grinding using ILs only.The specific grinding energy and grinding force ratio can be reduced by over 40%at grinding depth of 10μm.Work-piece machined surface roughness can be decreased by over 10%,and grinding temperature can be lowered over 50℃at grinding depth of 30μm.Aiming at the unclear tribological mechanism of graphene/IL nanofluids,molecular dynamics simulations for abrasive grain/workpiece grinding interface are performed to explore the formation mechanism of physical adsorption film.The simulations show that the grinding interface is in a boundary lubrication state.IL molecules absorb in groove-like fractures on grain wear flat face to form boundary lubrication film,and graphene nanosheets can enter into the grinding interface to further decrease the contact area between abrasive grain and workpiece.Compared with MQL grinding,the average tangential grinding force of graphene/IL nanofluids can decrease up to 10.8%.The interlayer shear effect and low interlayer shear strength of graphene nanosheets are the principal causes of enhanced lubricating performance on the grinding interface.EDS and XPS analyses are further carried out to explore the formation mechanism of chemical reaction film.The analyses show that IL base fluid happens chemical reactions with workpiece material,producing FeF_(2),CrF_(3),and BN.The fresh machined surface of workpiece is oxidized by air,producing NiO,Cr_(2)O_(3) and Fe_(2)O_(3).The chemical reaction film is constituted by fluorides,nitrides and oxides together.The combined action of physical adsorption film and chemical reaction film make graphene/IL nano-fluids obtain excellent grinding performance.

Material Removal Mechanism and Force Modeling in Ultrasonic Vibration-Assisted Micro-Grinding Biological Bone

Micro-grinding with a spherical grinding head has been deemed an indispensable method in high-risk surgeries, such as neurosurgery and spine surgery, where bone grinding has long been plagued by the technical bottleneck of mechanical stress-induced crack damage. In response to this challenge, the ultrasound-assisted biological bone micro-grinding novel process with a spherical grinding head has been proposed by researchers. Force modeling is a prerequisite for process parameter determination in orthopedic surgery, and the difculty in establishing and accurately predicting bone micro-grinding force prediction models is due to the geometric distribution of abrasive grains and the dynamic changes in geometry and kinematics during the cutting process. In addressing these critical needs and technical problems, the shape and protrusion heights of the wear particle of the spherical grinding head were frst studied, and the gradual rule of the contact arc length under the action of high-speed rotating ultrasonic vibration was proposed. Second, the mathematical model of the maximum thickness of undeformed chips under ultrasonic vibration of the spherical grinding head was established. Results showed that ultrasonic vibration can reduce the maximum thickness of undeformed chips and increase the range of ductile and bone meal removals, revealing the mechanism of reducing grinding force. Further, the dynamic grinding behavior of diferent layers of abrasive particles under diferent instantaneous interaction states was studied. Finally, a prediction model of micro-grinding force was established in accordance with the relationship between grinding force and cutting depth, revealing the mechanism of micro-grinding force transfer under ultrasonic vibration. The theoretical model’s average deviations are 10.37% in x-axis direction, 6.85% in y-axis direction, and 7.81% in z-axis direction compared with the experimental results. This study provides theoretical guidance and technical support for clinical bone micro-grinding.

Formulation of Optimization Problems with Radiation Field Phases as Design Variables for Pattern Synthesis of Linear Antenna Arrays

Pattern synthesise of antenna arrays is usually complicated optimization problems,while evolutionary algorithms(EAs)are promising in solving these problems.This paper does not propose a new EA,but does construct a new form of optimization problems.The new optimization formulation has two differences from the common ones.One is the objective function is the field error between the desired and the designed,not the usual amplitude error between the desired and the designed.This difference is beneficial to decrease complexity in some sense.The second difference is that the design variables are changed as phases of desired radiation field within shaped-region,instead of excitation parameters.This difference leads to the reduction of the number of design variables.A series of synthesis experiments including equally and unequally spaced linear arrays with different pattern shape requirements are applied,and the effectiveness and advantages of the proposed new optimization problems are validated.The results show that the proposing a new optimization formulation with less complexity is as significant as proposing a new algorithm.

Applications of High-Efficiency Abrasive Process with CBN Grinding Wheel

High-efficiency abrasive process with CBN grinding wheel is one of the important techniques of advanced manufacture. Combined with raw and finishing machining, it can attain high material removal rate like turning, milling and planning. The difficult-to-grinding materials can also be ground by means of this method with high performance. In the present paper, development status and latest progresses on high-efficiency abrasive machining technologies with CBN grinding wheel relate to high speed and super-high speed grinding, quick point-grinding, high efficiency deep-cut grinding, creep feed deep grinding, heavy-duty snagging and abrasive belt grinding were summarized. The efficiency and parameters range of these abrasive machining processes were compared. The key technologies of high efficiency abrasive machining, including grinding wheel, spindle and bearing, grinder, coolant supplying, installation and orientation of wheel and workpiece and safety defended, as well as intelligent monitor and NC grinding were investigated. It is concluded that high efficiency abrasive machining is a promising technology in the future.

Temperature field model in surface grinding: a comparative assessment

Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.

Force model in electrostatic atomization minimum quantity lubrication milling GH4169 and performance evaluation

The nickel-based high-temperature alloy GH4169 is the material of choice for manufacturing critical components in aeroengines,and electrostatic atomization minimum quantity lubrication(EMQL)milling represents a fundamental machining process for GH4169.However,the effects of electric field parameters,jet parameters,nozzle position,and milling parameters on milling performance remain unclear,which constrains the broad application of EMQL in aerospace manufacturing.This study evaluated the milling performance of EMQL on nickel-based alloys using soybean oil as the lubrication medium.Results revealed that compared with conventional pneumatic atomization MQL milling,EMQL reduced the milling force by 15.2%-15.9%,lowered the surface roughness by 30.9%-54.2%,decreased the average roughness spacing by 47.4%-58.3%,and decreased the coefficient of friction and the specific energy of cutting by 55%and 19.6%,respectively.Subsequent optimization experiments using orthogonal arrays demonstrated that air pressure most significantly affected the milling force and specific energy of cutting,with a contribution rate of 22%,whereas voltage had the greatest effect on workpiece surface roughness,contributing 36.71%.Considering the workpiece surface morphology and the potential impact of droplet drift on environmental and health safety,the optimal parameter combination identified were a flow rate of 80 mL/h,an air pressure of 0.1 MPa,a voltage of 30 kV,a nozzle incidence angle of 35°,an elevation angle of 30°,and a target distance of 40 mm.This research aimed to provide technical insights for improving the surface integrity of aerospace materials that are difficult to machine during cutting operations.

Enhanced Heat Transfer Technology Based on Emission Reduction and Carbon Reduction in Cutting and Grinding

Huge carbon emissions in machining process,which characterized by high energy consumption and usage of non-renewable resources,is becoming an obsession in the past decades.In the face of the international strategy of carbon peak,it is imperative to eliminate the usage of mineral cutting fluids and reduce energy consumption and carbon emissions by green cutting/grinding technologies,such as dry cutting,minimum quantity lubrication(MQL).

Design and grindability assessment with cup shaped electroplated CBN wheel grinding turbine disc slots of powder metallurgy superalloy FGH96

The machining surface integrity of aero-engine turbine disc slots has a significant impact on their fatigue life and service performance,and achieving efficiency and high-precision machining is still a great challenge.The high machining requirements of future aeroengine turbine disc slots will be difficult to satisfy using the broaching method.In addition,existing methods of slot machin-ing face difficulties in ensuring surface integrity.This study explored a cup shaped electroplated Cubic Boron Nitride(CBN)abrasive wheel for profile grinding the turbine disc slots of FGH96 powder metallurgy superalloy.The matrix structure of the cup shaped abrasive wheel was designed and verified.A profile grinding experiment was conducted for fir-tree slots on a five-axis machining center.The accuracy and the surface integrity were analyzed.Results show that the key dimension detection results of the slots were within the allowable tolerance range.Meanwhile,an average sur-face roughness Ra of 0.55μm was achieved,the residual stress was compressive,the plastic defor-mation layer thickness was less than 5μm,and the hardening layer thickness was less than 20μm.The research findings provide a new approach to machining the slots of aviation engine turbine discs and guidance for the high-quality processing of complex components.

Milling surface roughness for 7050 aluminum alloy cavity influenced by nozzle position of nanofluid minimum quantity lubrication

In nanofluid minimum quantity lubrication(NMQL)milling of aviation aluminum alloy,it is the bottleneck problem to adjust the position parameters(target distance,incidence angle,and elevation angle)of the nozzle to improve the surface roughness of milling,which has large and uncontrollable errors.In this paper,the influence law of milling cutter speed,helical angle,and cavity shape on the flow field around the milling cutter was studied,and the optimal nozzle profile parameters were obtained.Using 7050 aluminum alloy as the workpiece material,the milling experiment of the NMQL cavity was conducted by utilizing cottonseed oil-based Al2 O3 nanofluid.Results show that the high velocity of the surrounding air flow field and the strong gas barrier could be attributed to high rotating velocities of the milling cutter.The incidence angle of the nozzle was consistent with the helical angle of the milling cutter,the target distance was appropriate at 25–30 mm,and the elevation angle was suitable at 60°–65°.The range and variance analyses of the signal-to-noise ratio of milling force and roughness were performed,and the chip morphology was observed and analyzed.The results show that the optimal combination of nozzle position parameters was the target distance of 30 mm,the incidence angle of 35°,and the elevation angle of 60°.Among these parameters,target distance had the largest impact on cutting performance with a contribution rate of more than 55%,followed by incidence angle and elevation contribution rate.Analysis by orthogonal experiment revealed that the nozzle position parameters were appropriate,and Ra(0.087 lm)was reduced by 30.4%from the maximum value(0.125 lm).Moreover,Rsm(0.05 mm)was minimum,which was 36%lower than that of the seventh group(Rsm=0.078 mm).

Cryogenic minimum quantity lubrication machining: from mechanism to application

Cutting fluid plays a cooling-lubrication role in the cutting of metal materials.However,the substantial usage of cutting fluid in traditional flood machining seriously pollutes the environment and threatens the health of workers.Environmental machining technologies,such as dry cutting,minimum quantity lubrication(MQL),and cryogenic cooling technology,have been used as substitute for flood machining.However,the insufficient cooling capacity of MQL with normal-temperature compressed gas and the lack of lubricating performance of cryogenic cooling technology limit their industrial application.The technical bottleneck of mechanical-thermal damage of difficult-to-cut materials in aerospace and other fields can be solved by combining cryogenic medium and MQL.The latest progress of cryogenic minimum quantity lubrication(CMQL)technology is reviewed in this paper,and the key scientific issues in the research achievements of CMQL are clarified.First,the application forms and process characteristics of CMQL devices in turning,milling,and grinding are systematically summarized from traditional settings to innovative design.Second,the cooling-lubrication mechanism of CMQL and its influence mechanism on material hardness,cutting force,tool wear,and workpiece surface quality in cutting are extensively revealed.The effects of CMQL are systematically analyzed based on its mechanism and application form.Results show that the application effect of CMQL is better than that of cryogenic technology or MQL alone.Finally,the prospect,which provides basis and support for engineering application and development of CMQL technology,is introduced considering the limitations of CMQL.

Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: From mechanisms to application

It is an inevitable trend of sustainable manufacturing to replace flood and dry machining with minimum quantity lubrication(MQL)technology.Nevertheless,for aeronautical difficult-tomachine materials,MQL couldn’t meet the high demand of cooling and lubrication due to high heat generation during machining.Nano-biolubricants,especially non-toxic carbon group nano-enhancers(CGNs)are used,can solve this technical bottleneck.However,the machining mechanisms under lubrication of CGNs are unclear at complex interface between tool and workpiece,which characterized by high temperature,pressure,and speed,limited its application in factories and necessitates in-depth understanding.To fill this gap,this study concentrates on the comprehensive quantitative assessment of tribological characteristics based on force,tool wear,chip,and surface integrity in titanium alloy and nickel alloy machining and attempts to answer mechanisms systematically.First,to establish evaluation standard,the cutting mechanisms and performance improvement behavior covering antifriction,antiwear,tool failure,material removal,and surface formation of MQL were revealed.Second,the unique film formation and lubrication behaviors of CGNs in MQL turning,milling,and grinding are concluded.The influence law of molecular structure and micromorphology of CGNs was also answered and optimized options were recommended by considering diverse boundary conditions.Finally,in view of CGNs limitations in MQL,the future development direction is proposed,which needs to be improved in thermal stability of lubricant,activity of CGNs,controllable atomization and transportation methods,and intelligent formation of processing technology solutions.

Nano-enhanced biolubricant in sustainable manufacturing:From processability to mechanisms

To eliminate the negative effect of traditional metal-working fluids and achieve sustainable manufacturing,the usage of nano-enhanced biolubricant(NEBL)is widely researched in minimum quantify lubrication(MQL)machining.It's improved tool wear and surface integrity have been preliminarily verified by experimental studies.The previous review papers also concluded the major influencing factors of processability including nano-enhancer and lubricant types,NEBL concentration,micro droplet size,and so on.Nevertheless,the complex action of NEBL,from preparation,atomization,infiltration to heat transfer and anti-friction,is indistinct which limits preparation of process specifications and popularity in factories.Especially in the complex machining process,in-depth understanding is difficult and meaningful.To fll this gap,this paper concentrates on the comprehensive quantitative assessment of processability based on tribological,thermal,and machined surface quality aspects for NEBL application in turning,milling,and grinding.Then it attempts to answer mechanisms systematically considering multi-factor influence of molecular structure,physicochemical properties,concentration,and dispersion.Firstly,this paper reveals advanced lubrication and heat transfer mechanisms of NEBL by quantitative comparison with biolubricant-based MQL machining.Secondly,the distinctive filmformation,atomization,and infiltration mechanisms of NEBL,as distinguished from metal-working fluid,are clarified combining with its unique molecular structure and physical properties.Furtherly,the process optimization strategy is concluded based on the synergistic relationship analysis among process variables,physicochemical properties,machining mechanisms,and performance of NEBL.Finally,the future development directions are put forward aiming at current performance limitations of NEBL,which requires improvement on preparation and jet methods respects.This paper will help scientists deeply understand effective mechanism,formulate process specifications,and find future development trend of this technology.

Fiber-reinforced composites in milling and grinding:machining bottlenecks and advanced strategies

Fiber-reinforced composites have become the preferred material in the fields of aviation and aerospace because of their high-strength performance in unit weight.The composite components are manufactured by near netshape and only require finishing operations to achieve final dimensional and assembly tolerances.Milling and grinding arise as the preferred choices because of their precision processing.Nevertheless,given their laminated,anisotropic,and heterogeneous nature,these materials are considered difficult-to-machine.As undesirable results and challenging breakthroughs,the surface damage and integrity of these materials is a research hotspot with important engineering significance.This review summarizes an up-to-date progress of the damage formation mechanisms and suppression strategies in milling and grinding for the fiber-reinforced composites reported in the literature.First,the formation mechanisms of milling damage,including delamination,burr,and tear,are analyzed.Second,the grinding mechanisms,covering material removal mechanism,thermal mechanical behavior,surface integrity,and damage,are discussed.Third,suppression strategies are reviewed systematically from the aspects of advanced cutting tools and technologies,including ultrasonic vibration-assisted machining,cryogenic cooling,minimum quantity lubrication(MQL),and tool optimization design.Ultrasonic vibration shows the greatest advantage of restraining machining force,which can be reduced by approximately 60%compared with conventional machining.Cryogenic cooling is the most effective method to reduce temperature with a maximum reduction of approximately 60%.MQL shows its advantages in terms of reducing friction coefficient,force,temperature,and tool wear.Finally,research gaps and future exploration directions are prospected,giving researchers opportunity to deepen specific aspects and explore new area for achieving high precision surface machining of fiber-reinforced composites.