A review of reservoir damage during hydraulic fracturing of deep and ultra-deep reservoirs

Deep and ultra-deep reservoirs have gradually become the primary focus of hydrocarbon exploration as a result of a series of significant discoveries in deep hydrocarbon exploration worldwide.These reservoirs present unique challenges due to their deep burial depth(4500-8882 m),low matrix permeability,complex crustal stress conditions,high temperature and pressure(HTHP,150-200℃,105-155 MPa),coupled with high salinity of formation water.Consequently,the costs associated with their exploitation and development are exceptionally high.In deep and ultra-deep reservoirs,hydraulic fracturing is commonly used to achieve high and stable production.During hydraulic fracturing,a substantial volume of fluid is injected into the reservoir.However,statistical analysis reveals that the flowback rate is typically less than 30%,leaving the majority of the fluid trapped within the reservoir.Therefore,hydraulic fracturing in deep reservoirs not only enhances the reservoir permeability by creating artificial fractures but also damages reservoirs due to the fracturing fluids involved.The challenging“three-high”environment of a deep reservoir,characterized by high temperature,high pressure,and high salinity,exacerbates conventional forms of damage,including water sensitivity,retention of fracturing fluids,rock creep,and proppant breakage.In addition,specific damage mechanisms come into play,such as fracturing fluid decomposition at elevated temperatures and proppant diagenetic reactions at HTHP conditions.Presently,the foremost concern in deep oil and gas development lies in effectively assessing the damage inflicted on these reservoirs by hydraulic fracturing,comprehending the underlying mechanisms,and selecting appropriate solutions.It's noteworthy that the majority of existing studies on reservoir damage primarily focus on conventional reservoirs,with limited attention given to deep reservoirs and a lack of systematic summaries.In light of this,our approach entails initially summarizing the current knowledge pertaining to the types of fracturing fluids employed in deep and ultra-deep reservoirs.Subsequently,we delve into a systematic examination of the damage processes and mechanisms caused by fracturing fluids within the context of hydraulic fracturing in deep reservoirs,taking into account the unique reservoir characteristics of high temperature,high pressure,and high in-situ stress.In addition,we provide an overview of research progress related to high-temperature deep reservoir fracturing fluid and the damage of aqueous fracturing fluids to rock matrix,both artificial and natural fractures,and sand-packed fractures.We conclude by offering a summary of current research advancements and future directions,which hold significant potential for facilitating the efficient development of deep oil and gas reservoirs while effectively mitigating reservoir damage.

Numerical simulation on the multiple planar fracture propagation with perforation plugging in horizontal wells

Intra-stage multi-cluster temporary plugging and diverting fracturing(ITPF)is one of the fastest-growing techniques to obtain uniform reservoir stimulation in shale gas reservoirs.However,propagation geometries of multiple fractures during ITPF are not clear due that the existing numerical models cannot capture the effects of perforation plugging.In this paper,a new three-dimensional FEM based on CZM was developed to investigate multiple planar fracture propagation considering perforation plugging during ITPF.Meanwhile,the fluid pipe element and its subroutine were first developed to realize the flux partitioning before or after perforation plugging.The results showed that the perforation plugging changed the original distribution of the number of perforations in each fracture,thus changing the flux partitioning after perforation plugging,which could eliminate the effect of stress interference between multiple fractures and promote a uniform fluid distribution.The standard deviation of fluid distribution in the perforation plugging case was only 8.48%of that in the non-diversion case.Furthermore,critical plugging parameters have been investigated quantitatively.Specifically,injecting more diverters will create a higher fluid pressure rise in the wellbore,which will increase the risk of wellbore integrity.Comprehensively considering pressure rise and fluid distribution,the number of diverters should be 50%of the total number of perforations(N_(pt)),whose standard deviation of fluid distribution of multiple fractures was lower than those in the cases of injecting 10%N_(pt),30%N_(pt)and 70%N_(pt).The diverters should be injected at an appropriate timing,i.e.40%or 50%of the total fracturing time(tft),whose standard deviation of the fluid distribution was only about 20%of standard deviations in the cases of injecting at20%tftor 70%tft.A single injection with all diverters can maintain high bottom-hole pressure for a longer period and promote a more uniform fluid distribution.The standard deviation of the fluid distribution in the case of a single injection was 43.62%-55.41%of the other cases with multiple injection times.This study provides a meaningful perspective and some optimal plugging parameters on the field design during IPTF.

Numerical simulation of fracture propagation in Russia carbonate reservoirs during refracturing

Refracturing treatment is often performed on Russian carbonate reservoirs because of the quick production decline of reservoirs.The traditional refracturing model assumes that a refracture initiates in the normal direction relative to the initial hydro-fracture.This assumption is inconsistent with oilfield measurements of refracture propagation trajectories.Indeed,the existing model is not based on an indepth understanding of initiation and propagation mechanisms of the second hydraulic fractures during refracturing.In this study,we use the extended finite element method to investigate refracture propagation paths at different initiation angles.Both the enriched function approach and phantom mode technique are incorporated into the refracturing model,thereby ensuring that the refracture can freely extend on the structured mesh without any refinement near the crack tips.Key factors including production time,stress anisotropy and initiation angle,and the propped mechanical effect are analyzed in detail.This study provides new insight into the mechanism of refracture propagation in unconventional reservoirs.

An efficient multigrid-DEIM semi-reduced-order model for simulation of single-phase compressible flow in porous media

In this paper,an efcient multigrid-DEIM semi-reduced-order model is developed to accelerate the simulation of unsteady single-phase compressible fow in porous media.The cornerstone of the proposed model is that the full approximate storage multigrid method is used to accelerate the solution of fow equation in original full-order space,and the discrete empirical interpolation method(DEIM)is applied to speed up the solution of Peng-Robinson equation of state in reduced-order subspace.The multigrid-DEIM semi-reduced-order model combines the computation both in full-order space and in reducedorder subspace,which not only preserves good prediction accuracy of full-order model,but also gains dramatic computational acceleration by multigrid and DEIM.Numerical performances including accuracy and acceleration of the proposed model are carefully evaluated by comparing with that of the standard semi-implicit method.In addition,the selection of interpolation points for constructing the low-dimensional subspace for solving the Peng-Robinson equation of state is demonstrated and carried out in detail.Comparison results indicate that the multigrid-DEIM semi-reduced-order model can speed up the simulation substantially at the same time preserve good computational accuracy with negligible errors.The general acceleration is up to 50-60 times faster than that of standard semi-implicit method in two-dimensional simulations,but the average relative errors of numerical results between these two methods only have the order of magnitude 10^(−4)-10^(−6)%.

Experimental study of the temporary plugging capability of diverters to block hydraulic fractures in high-temperature geothermal reservoirs

The effective plugging of artificial fractures is key to the success of temporary plugging and diverting fracturing technology,which is one of the most promising ways to improve the heat recovery efficiency of hot dry rock.At present,how temporary plugging agents plug artificial fractures under high temperature remains unclear.In this paper,by establishing an improved experimental system for the evaluation of temporary plugging performance at high temperature,we clarified the effects of high temperature,injection rate,and fracture width on the pressure response and plugging efficiency of the fracture.The results revealed that the temporary plugging process of artificial fractures in hot dry rock can be divided into four main stages:the initial stage of temporary plugging,the bridging stage of the particles,the plugging formation stage,and the high-pressure dense plugging stage.As the temperature increases,the distribution distance of the temporary plugging agent,the number of pressure fluctuations,and the time required for crack plugging increases.Particularly,when the temperature increases by 100℃,the complete plugging time increases by 90.7%.

Differential distribution of authenticity results of different varieties of refined honey based on stable isotope ratio method

Objective Using the stable isotope ratio method for the authenticity identification and variety identification of refined honey.Methods In this paper,a total of 17 samples of different varieties of refined honey were used to obtain refined honey proteins by precipitation with sodium tungstate solution and sulphuric acid solution.The isotope mass spectrometer was used to simultaneously detect theδ^(13)C values of refined honey proteins and refined honey as well as theδ^(18)O andδ^(2)H values of refined honey,processed of the results obtained,analysed the authenticity of the samples and conduct a variety identification study.Results Tested of the resulting honey samples,the results showed that four batches of refined honey did not up to standard,two batches of C-4 vegetable syrup were detected as adulterated,and two batches of protein were not detected.Theδ^(18)O andδ^(2)H values of refined honey were also found to be effective in distinguishing the varietal origin of refined honey to a certain extent.Conclusions The stable isotope ratio method is useful in the authenticity identification of refined honey,and provides new ideas to further promote the authenticity of refined honey and variety identification research.