Milling Force Model for Aviation Aluminum Alloy: Academic Insight and Perspective Analysis

Aluminum alloy is the main structural material of aircraft,launch vehicle,spaceship,and space station and is processed by milling.However,tool wear and vibration are the bottlenecks in the milling process of aviation aluminum alloy.The machining accuracy and surface quality of aluminum alloy milling depend on the cutting parameters,material mechanical properties,machine tools,and other parameters.In particular,milling force is the crucial factor to determine material removal and workpiece surface integrity.However,establishing the prediction model of milling force is important and difficult because milling force is the result of multiparameter coupling of process system.The research progress of cutting force model is reviewed from three modeling methods:empirical model,finite element simulation,and instantaneous milling force model.The problems of cutting force modeling are also determined.In view of these problems,the future work direction is proposed in the following four aspects:(1)high-speed milling is adopted for the thin-walled structure of large aviation with large cutting depth,which easily produces high residual stress.The residual stress should be analyzed under this particular condition.(2)Multiple factors(e.g.,eccentric swing milling parameters,lubrication conditions,tools,tool and workpiece deformation,and size effect)should be considered comprehensively when modeling instantaneous milling forces,especially for micro milling and complex surface machining.(3)The database of milling force model,including the corresponding workpiece materials,working condition,cutting tools(geometric figures and coatings),and other parameters,should be established.(4)The effect of chatter on the prediction accuracy of milling force cannot be ignored in thin-walled workpiece milling.(5)The cutting force of aviation aluminum alloy milling under the condition of minimum quantity lubrication(mql)and nanofluid mql should be predicted.

Vegetable Oil-Based Nanolubricants in Machining:From Physicochemical Properties to Application

Cutting fluid is crucial in ensuring surface quality and machining accuracy during machining.However,traditional mineral oil-based cutting fluids no longer meet modern machining’s health and environmental protection require-ments.As a renewable,pollution-free alternative with excellent processing characteristics,vegetable oil has become an inevitable replacement.However,vegetable oil lacks oxidation stability,extreme pressure,and antiwear proper-ties,which are essential for machining requirements.The physicochemical characteristics of vegetable oils and the improved methods’application mechanism are not fully understood.This study aims to investigate the effects of viscosity,surface tension,and molecular structure of vegetable oil on cooling and lubricating properties.The mechanisms of autoxidation and high-temperature oxidation based on the molecular structure of vegetable oil are also discussed.The study further investigates the application mechanism and performance of chemical modification and antioxidant additives.The study shows that the propionic ester of methyl hydroxy-oleate obtained by epoxidation has an initial oxidation temperature of 175℃.The application mechanism and extreme pressure performance of conventional extreme pressure additives and nanoparticle additives were also investigated to solve the problem of insufficient oxidation resistance and extreme pressure performance of nanobiological lubricants.Finally,the study discusses the future prospects of vegetable oil for chemical modification and nanoparticle addition.The study provides theoretical guidance and technical support for the industrial application and scientific research of vegetable oil in the field of lubrication and cooling.It is expected to promote sustainable development in the manufacturing industry.

Electrostatic atomization minimum quantity lubrication machining:from mechanism to application

Metal cutting fluids(MCFs)under flood conditions do not meet the urgent needs of reducing carbon emission.Biolubricant-based minimum quantity lubrication(MQL)is an effective alternative to flood lubrication.However,pneumatic atomization MQL has poor atomization properties,which is detrimental to occupational health.Therefore,electrostatic atomization MQL requires preliminary exploratory studies.However,systematic reviews are lacking in terms of capturing the current research status and development direction of this technology.This study aims to provide a comprehensive review and critical assessment of the existing understanding of electrostatic atomization MQL.This research can be used by scientists to gain insights into the action mechanism,theoretical basis,machining performance,and development direction of this technology.First,the critical equipment,eco-friendly atomization media(biolubricants),and empowering mechanisms of electrostatic atomization MQL are presented.Second,the advanced lubrication and heat transfer mechanisms of biolubricants are revealed by quantitatively comparing MQL with MCF-based wet machining.Third,the distinctive wetting and infiltration mechanisms of electrostatic atomization MQL,combined with its unique empowering mechanism and atomization method,are compared with those of pneumatic atomization MQL.Previous experiments have shown that electrostatic atomization MQL can reduce tool wear by 42.4%in metal cutting and improve the machined surface Ra by 47%compared with pneumatic atomization MQL.Finally,future development directions,including the improvement of the coordination parameters and equipment integration aspects,are proposed.

Tribological Performance of Different Concentrations of Al_(2)O_(3)Nanofluids on Minimum Quantity Lubrication Milling

Nanofluid minimum quantity lubrication(NMQL)is a green processing technology.Cottonseed oil is suitable as base oil because of excellent lubrication performance,low freezing temperature,and high yield.Al_(2)O_(3)nanoparticles improve not only the heat transfer capacity but also the lubrication performance.The physical and chemical proper-ties of nanofluid change when Al_(2)O_(3)nanoparticles are added.However,the effects of the concentration of nanofluid on lubrication performance remain unknown.Furthermore,the mechanisms of interaction between Al_(2)O_(3)nanoparti-cles and cottonseed oil are unclear.In this research,nanofluid is prepared by adding different mass concentrations of Al_(2)O_(3)nanoparticles(0,0.2%,0.5%,1%,1.5%,and 2%wt)to cottonseed oil during minimum quantity lubrication(MQL)milling 45 steel.The tribological properties of nanofluid with different concentrations at the tool/workpiece interface are studied through macro-evaluation parameters(milling force,specific energy)and micro-evaluation parameters(surface roughness,micro morphology,contact angle).The result show that the specific energy is at the minimum(114 J/mm^(3)),and the roughness value is the lowest(1.63μm)when the concentration is 0.5 wt%.The surfaces of the chip and workpiece are the smoothest,and the contact angle is the lowest,indicating that the tribological proper-ties are the best under 0.5 wt%.This research investigates the intercoupling mechanisms of Al_(2)O_(3)nanoparticles and cottonseed base oil,and acquires the optimal Al_(2)O_(3)nanofluid concentration to receive satisfactory tribological properties.

Biological Stability of Water-Based Cutting Fluids:Progress and Application

The application of cutting fluid in the field of engineering manufacturing has a history of hundreds of years,and it plays a vital role in the processing efficiency and surface quality of parts.Among them,water-based cutting fluid accounts for more than 90%of the consumption of cutting fluid.However,long-term recycling of water-based cutting fluid could easily cause deterioration,and the breeding of bacteria could cause the cutting fluid to fail,increase manufacturing costs,and even endanger the health of workers.Traditional bactericides could improve the biological stability of cutting fluids,but they are toxic to the environment and do not conform to the development trend of low-carbon manufacturing.Low-carbon manufacturing is inevitable and the direction of sustainable manufacturing.The use of nanomaterials,transition metal complexes,and physical sterilization methods on the bacterial cell membrane and genetic material could effectively solve this problem.In this article,the mechanism of action of additives and microbial metabolites was first analyzed.Then,the denaturation mechanism of traditional bactericides on the target protein and the effect of sterilization efficiency were summarized.Further,the mechanism of nanomaterials disrupting cell membrane potential was discussed.The effects of lipophilicity and the atomic number of transition metal complexes on cell membrane penetration were also summarized,and the effects of ultraviolet rays and ozone on the destruction of bacterial genetic material were reviewed.In other words,the bactericidal performance,hazard,degradability,and economics of various sterilization methods were comprehensively evaluated,and the potential development direction of improving the biological stability of cutting fluid was proposed.

Experimental investigation of thermal performance characteristics of sintered copper wicked and grooved heat pipes:A comparative study

Heat pipes are most frequently used for thermal management solutions.Selection of right type of heat pipe for a specific scenario is utmost necessary for best outcomes.The purpose of this research is comparison of thermal performance characteristics of sintered copper wicked and grooved heat pipes,which are mostly used types of heat pipes.Distilled water filled heat pipes were tested through experimentation in gravity assisted position.Experimental outcomes have been compiled in terms of capillary pressure,operating temperature,thermal resistance and heat transfer coefficient.Capillary pressure is high in sintered heat pipes compared to grooved heat pipes irrespective of groove dimensions.Grooved heat pipes have lower operating temperature compared to sintered heat pipes at the same heat load.At 8 W,compared to sintered heat pipes,grooved heat pipes have 8.24% lower condenser surface temperature,4.41% lower evaporator surface temperature and 7.79% lower saturation temperature.Thermal resistance of sintered heat pipe is much lower than grooved heat pipe.The maximum relative difference of 63.8% was observed at 8 W.Heat transfer coefficient of sintered heat pipe was observed double compared to grooved heat pipe at 8 W heat load.Thermal resistance and hence heat transfer coefficient of sintered heat pipe change almost in a linear manner with respect to heat load but unexpectedly turning point is observed in thermal resistance and heat transfer coefficient of grooved heat pipe.Grooved heat pipes attain equilibrium much earlier compared to sintered ones.Varying heat loads from 4 to 20 W causes variation in equilibrium establishment time from 7 to 4 min for grooved and from 10 to 7 min for sintered heat pipes.

Experimental Study on Heat Storage Properties Comparison of Paraffin/Metal Foams Phase Change Material Composites

Heat storage properties of phase change materials(PCMs) are essential characteristics that perform a key role in thermal heat energy storage systems.The thermal properties of PCMs can be improved by developing metal foam/PCM composites.The addition of metal foam in PCMs has a significant effect on the thermal characteristics of PCMs.In this paper,the heat storage properties of two different metal foam/PCM composites were experimentally examined.The behavior of paraffin in metal foam(copper and iron-nickel)/paraffin composites concerning pure paraffin at a constant heat flux of 1000 W/m^(2) in three directions simultaneously(x,y,and z) was studied.Paraffin was infiltrated into copper and iron-nickel foams to develop composite materials which resulted in enhancing the thermal conductivity of the paraffin.A comparative analysis is made on the heat storage properties of paraffin in copper and iron-nickel foams/paraffin composites.Inner temperature distribution during the phase transition process is experimentally evaluated.This comparison indicates that temperature uniformity in copper foam/paraffin composite is better than in iron-nickel foam/paraffin composite and pure paraffin at the same heat flux.Experimental results show that at heat flux of 1000 W/m^(2),the heat storage time for copper foam/paraffin composite is 20.63% of that of iron-nickel foam/paraffin composite.

Advances in fabrication of ceramic corundum abrasives based on sol–gel process

Corundum abrasives with good chemical stability can be fabricated into various free abrasives and bonded abrasive tools that are widely used in the precision machining of various parts.However,these abrasives cannot satisfy the machining requirements of difficult-to-machine materials with high hardness,high strength,and strong wearing resistance.Although superhard abrasives can machine the above-mentioned materials,their dressing and manufacturing costs are high.By contrast,ceramic corundum abrasives fabricated by sol–gel method is a costeffective product between conventional and superhard abrasives.Ceramic corundum abrasives exhibit self-sharpening and high toughness.In this review,the optimization methods of ceramic corundum abrasive properties are introduced from three aspects:precursor synthesis,particle shaping,and sintering.Firstly,the functional mechanism of seeds and additives on the microstructural and mechanical properties of abrasives is analyzed.Specifically,seeds can reduce the phase transition temperature and improve fracture toughness.The grain size and uniformly dense structure can be controlled by applying an appropriate amount of multicomponent additives.Then,the urgent need of engineering application and machinability of special shape ceramic corundum abrasives is reviewed,and three methods of abrasive shaping are summarized.The micromold replication technique is highly advanced and can be used to prepare functional abrasives.Additionally,the influence of a new sintering method,namely,two-step sintering technique,on the microstructural and mechanical performance of ceramic corundum abrasives is summarized.Finally,the challenge and developmental trend of the optimization of ceramic corundum abrasives are prospected.

Nano-enhanced biolubricant in sustainable manufacturing:From processability to mechanisms

To eliminate the negative effect of traditional metal-working fluids and achieve sustainable manufacturing,the usage of nano-enhanced biolubricant(NEBL)is widely researched in minimum quantify lubrication(MQL)machining.It's improved tool wear and surface integrity have been preliminarily verified by experimental studies.The previous review papers also concluded the major influencing factors of processability including nano-enhancer and lubricant types,NEBL concentration,micro droplet size,and so on.Nevertheless,the complex action of NEBL,from preparation,atomization,infiltration to heat transfer and anti-friction,is indistinct which limits preparation of process specifications and popularity in factories.Especially in the complex machining process,in-depth understanding is difficult and meaningful.To fll this gap,this paper concentrates on the comprehensive quantitative assessment of processability based on tribological,thermal,and machined surface quality aspects for NEBL application in turning,milling,and grinding.Then it attempts to answer mechanisms systematically considering multi-factor influence of molecular structure,physicochemical properties,concentration,and dispersion.Firstly,this paper reveals advanced lubrication and heat transfer mechanisms of NEBL by quantitative comparison with biolubricant-based MQL machining.Secondly,the distinctive filmformation,atomization,and infiltration mechanisms of NEBL,as distinguished from metal-working fluid,are clarified combining with its unique molecular structure and physical properties.Furtherly,the process optimization strategy is concluded based on the synergistic relationship analysis among process variables,physicochemical properties,machining mechanisms,and performance of NEBL.Finally,the future development directions are put forward aiming at current performance limitations of NEBL,which requires improvement on preparation and jet methods respects.This paper will help scientists deeply understand effective mechanism,formulate process specifications,and find future development trend of this technology.

Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: From mechanisms to application

It is an inevitable trend of sustainable manufacturing to replace flood and dry machining with minimum quantity lubrication(MQL)technology.Nevertheless,for aeronautical difficult-tomachine materials,MQL couldn’t meet the high demand of cooling and lubrication due to high heat generation during machining.Nano-biolubricants,especially non-toxic carbon group nano-enhancers(CGNs)are used,can solve this technical bottleneck.However,the machining mechanisms under lubrication of CGNs are unclear at complex interface between tool and workpiece,which characterized by high temperature,pressure,and speed,limited its application in factories and necessitates in-depth understanding.To fill this gap,this study concentrates on the comprehensive quantitative assessment of tribological characteristics based on force,tool wear,chip,and surface integrity in titanium alloy and nickel alloy machining and attempts to answer mechanisms systematically.First,to establish evaluation standard,the cutting mechanisms and performance improvement behavior covering antifriction,antiwear,tool failure,material removal,and surface formation of MQL were revealed.Second,the unique film formation and lubrication behaviors of CGNs in MQL turning,milling,and grinding are concluded.The influence law of molecular structure and micromorphology of CGNs was also answered and optimized options were recommended by considering diverse boundary conditions.Finally,in view of CGNs limitations in MQL,the future development direction is proposed,which needs to be improved in thermal stability of lubricant,activity of CGNs,controllable atomization and transportation methods,and intelligent formation of processing technology solutions.

Fiber-reinforced composites in milling and grinding:machining bottlenecks and advanced strategies

Fiber-reinforced composites have become the preferred material in the fields of aviation and aerospace because of their high-strength performance in unit weight.The composite components are manufactured by near netshape and only require finishing operations to achieve final dimensional and assembly tolerances.Milling and grinding arise as the preferred choices because of their precision processing.Nevertheless,given their laminated,anisotropic,and heterogeneous nature,these materials are considered difficult-to-machine.As undesirable results and challenging breakthroughs,the surface damage and integrity of these materials is a research hotspot with important engineering significance.This review summarizes an up-to-date progress of the damage formation mechanisms and suppression strategies in milling and grinding for the fiber-reinforced composites reported in the literature.First,the formation mechanisms of milling damage,including delamination,burr,and tear,are analyzed.Second,the grinding mechanisms,covering material removal mechanism,thermal mechanical behavior,surface integrity,and damage,are discussed.Third,suppression strategies are reviewed systematically from the aspects of advanced cutting tools and technologies,including ultrasonic vibration-assisted machining,cryogenic cooling,minimum quantity lubrication(MQL),and tool optimization design.Ultrasonic vibration shows the greatest advantage of restraining machining force,which can be reduced by approximately 60%compared with conventional machining.Cryogenic cooling is the most effective method to reduce temperature with a maximum reduction of approximately 60%.MQL shows its advantages in terms of reducing friction coefficient,force,temperature,and tool wear.Finally,research gaps and future exploration directions are prospected,giving researchers opportunity to deepen specific aspects and explore new area for achieving high precision surface machining of fiber-reinforced composites.

Machinability of ultrasonic vibration-assisted micro-grinding in biological bone using nanolubricant

Bone grinding is an essential and vital procedure in most surgical operations.Currently,the insufficient cooling capacity of dry grinding,poor visibility of drip irrigation surgery area,and large grinding force leading to high grinding temperature are the technical bottlenecks of micro-grinding.A new micro-grinding process called ultrasonic vibration-assisted nanoparticle jet mist cooling(U-NJMC)is innovatively proposed to solve the technical problem.It combines the advantages of ultrasonic vibration(UV)and nanoparticle jet mist cooling(NJMC).Notwithstanding,the combined effect of multi parameter collaborative of U-NJMC on cooling has not been investigated.The grinding force,friction coefficient,specific grinding energy,and grinding temperature under dry,drip irrigation,UV,minimum quantity lubrication(MQL),NJMC,and U-NJMC micro-grinding were compared and analyzed.Results showed that the minimum normal grinding force and tangential grinding force of U-NJMC micro-grinding were 1.39 and 0.32 N,which were 75.1%and 82.9%less than those in dry grinding,respectively.The minimum friction coefficient and specific grinding energy were achieved using U-NJMC.Compared with dry,drip,UV,MQL,and NJMC grinding,the friction coefficient of U-NJMC was decreased by 31.3%,17.0%,19.0%,9.8%,and 12.5%,respectively,and the specific grinding energy was decreased by 83.0%,72.7%,77.8%,52.3%,and 64.7%,respectively.Compared with UV or NJMC alone,the grinding temperature of U-NJMC was decreased by 33.5%and 10.0%,respectively.These results showed that U-NJMC provides a novel approach for clinical surgical micro-grinding of biological bone.