Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm monitoring.To address these challenges,Prof.Seung H...Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm monitoring.To address these challenges,Prof.Seung Hwan Ko and Taek-Soo Kim’s team introduced a laserinduced phase separation and adhesion method for fabricating conductive hydrogels consisting of pure poly(3,4-ethylenedioxythiophene):polystyrene sulfonate on polymer substrates.The laser-induced phase separation and adhesion treated conducting polymers can be selectively transformed into conductive hydrogels that exhibit wet conductivities of 101.4 S cm^(−1) with a spatial resolution down to 5μm.Moreover,they maintain impedance and charge-storage capacity even after 1 h of sonication.The micropatterned electrode arrays demonstrate their potential in long-term in vivo signal recordings,highlighting their promising role in the field of bioelectronics.展开更多
BACKGROUND Hypernatremia represents a significant electrolyte imbalance associated with numerous adverse outcomes,particularly in cases of intensive care unit(ICU)-acquired hypernatremia(IAH).Nevertheless,its relevanc...BACKGROUND Hypernatremia represents a significant electrolyte imbalance associated with numerous adverse outcomes,particularly in cases of intensive care unit(ICU)-acquired hypernatremia(IAH).Nevertheless,its relevance in patients with septic shock remains uncertain.AIM To identify independent risk factors and their predictive efficacy for IAH to improve outcomes in patients with septic shock.METHODS In the present retrospective single-center study,a cohort of 157 septic shock patients with concurrent hypernatremia in the ICU at The First Affiliated Hospital of Soochow University,between August 1,2018,and May 31,2023,were analyzed.Patients were categorized based on the timing of hypernatremia occurrence into the IAH group(n=62),the non-IAH group(n=41),and the normonatremia group(n=54).RESULTS In the present study,there was a significant association between the high serum sodium concentrations,excessive persistent inflammation,immunosuppression and catabolism syndrome and chronic critical illness,while rapid recovery had an apparent association with normonatremia.Moreover,multivariable analyses revealed the following independent risk factors for IAH:Total urinary output over the preceding three days[odds ratio(OR)=1.09;95%CI:1.02–1.17;P=0.014],enteral nutrition(EN)sodium content of 500 mg(OR=2.93;95%CI:1.13–7.60;P=0.027),and EN sodium content of 670 mg(OR=6.19;95%CI:1.75–21.98;P=0.005)were positively correlated with the development of IAH.Notably,the area under the curve for total urinary output over the preceding three days was 0.800(95%CI:0.678–0.922,P=0.001).Furthermore,maximum serum sodium levels,the duration of hypernatremia,and varying sodium correction rates were significantly associated with 28-day in-hospital mortality in septic shock patients(P<0.05).CONCLUSION The present findings illustrate that elevated serum sodium level was significantly associated with a poor prognosis in septic shock patients in the ICU.It is highly recommended that hypernatremia be considered a potentially important prognostic indicator for the outcome of septic shock.展开更多
The life-cycle assessment method,which originates from general products and services,has gradually come to be applied to investigations of the life-cycle carbon emissions(LCCE)of buildings.A literature review was cond...The life-cycle assessment method,which originates from general products and services,has gradually come to be applied to investigations of the life-cycle carbon emissions(LCCE)of buildings.A literature review was conducted to clarify LCCE implications,calculations,and reductions in the context of buildings.A total of 826 global building carbon emission calculation cases were obtained from 161 studies based on the framework of the building life-cycle stage division stipulated by ISO 21930 and the basic principles of the emission factor(EF)approach.The carbon emission calculation methods and results are discussed herein,based on the modules of production,construction,use,end-of-life,and supplementary benefits.According to the hotspot distribution of a building’s carbon emissions,carbon reduction strategies are classified into six groups for technical content and benefits analysis,including reducing the activity data pertaining to building materials and energy,reducing the carbon EFs of the building materials and energy,and exploiting the advantages of supplementary benefits.The research gaps and challenges in current building LCCE studies are summarized in terms of research goals and ideas,calculation methods,basic parameters,and carbon reduction strategies;development suggestions are also proposed.展开更多
The pan-Arctic is confronted with air pollution transported from lower latitudes.Observations have shown that aerosols help increase plant photosynthesis through the diffuse radiation fertilization effects(DRFEs).Whil...The pan-Arctic is confronted with air pollution transported from lower latitudes.Observations have shown that aerosols help increase plant photosynthesis through the diffuse radiation fertilization effects(DRFEs).While such DRFEs have been explored at low to middle latitudes,the aerosol impacts on pan-Arctic ecosystems and the contributions by anthropogenic and natural emission sources remain less quantified.Here,we perform regional simulations at 0.2o×0.2ousing a well-validated vegetation model(Yale Interactive terrestrial Biosphere,YIBs)in combination with multi-source of observations to quantify the impacts of aerosol DRFEs on the net primary productivity(NPP)in the pan-Arctic during 2001-19.Results show that aerosol DRFEs increase pan-Arctic NPP by 2.19 Pg C(12.8%)yr^(-1)under clear-sky conditions,in which natural and anthropogenic sources contribute to 8.9% and 3.9%,respectively.Under all-sky conditions,such DRFEs are largely dampened by cloud to only 0.26 Pg C(1.24%)yr^(-1),with contributions of 0.65% by natural and 0.59% by anthropogenic species.Natural aerosols cause a positive NPP trend of 0.022% yr^(-1)following the increased fire activities in the pan-Arctic.In contrast,anthropogenic aerosols induce a negative trend of-0.01% yr^(-1)due to reduced emissions from the middle latitudes.Such trends in aerosol DRFEs show a turning point in the year of 2007 with more positive NPP trends by natural aerosols but negative NPP trends by anthropogenic aerosols thereafter.Though affected by modeling uncertainties,this study suggests a likely increasing impact of aerosols on terrestrial ecosystems in the pan-Arctic under global warming.展开更多
Humic acids(HAs)are widely used as filtrate and viscosity reducers in drilling fluids.However,their practical utility is limited due to poor stability in salt resistance and high-temperature resistance.Hightemperature...Humic acids(HAs)are widely used as filtrate and viscosity reducers in drilling fluids.However,their practical utility is limited due to poor stability in salt resistance and high-temperature resistance.Hightemperature coal pitch(CP)is a by-product from coal pyrolysis above 650℃.The substance's molecular structure is characterized by a dense arrangement of aromatic hydrocarbon and alkyl substituents.This unique structure gives it unique chemical properties and excellent drilling performance,surpassing traditional humic acids in drilling operations.Potassium humate is prepared from CP(CP-HA-K)by thermal catalysis.A new type of high-quality humic acid temperature-resistant viscosity-reducer(Graft CP-HA-K polymer)is synthesized with CP-HA-K,hydrolyzed polyacrylonitrile sodium salt(Na-HPAN),urea,formaldehyde,phenol and acrylamide(AAM)as raw materials.The experimental results demonstrate that the most favorable conditions for the catalytic preparation of CP-HA-K are 1 wt%catalyst dosage,30 wt%KOH dosage,a reaction temperature of 250℃,and a reaction time of 2 h,resulting in a maximum yield of CP-HA-K of 39.58%.The temperature resistance of the Graft CP-HA-K polymer is measured to be 177.39℃,which is 55.39℃ higher than that of commercial HA-K.This is due to the abundant presence of amide,hydroxyl,and amine functional groups in the Graft CP-HA-K polymer,which increase the length of the carbon chains,enhance the electrostatic repulsion on the surface of solid particles.After being aged to 120℃ for a specified duration,the Graft CP-HA-K polymer demonstrates significantly higher viscosity reduction(42.12%)compared to commercial HA-K(C-HA-K).Furthermore,the Graft CP-HA-K polymer can tolerate a high salt concentration of 8000 mg.L-1,measured after the addition of optimum amount of 3 wt%Graft CP-HA-K polymer.The action mechanism of Graft CP-HA-K polymer on high-temperature drilling fluid is that the Graft CP-HA-K polymer can increase the repulsive force between solid particles and disrupt bentonite's reticulation structure.Overall,this research provides novelty insights into the synthesis of artificial humic acid materials and the development of temperature-resistant viscosity reducers,offering a new avenue for the utilization of CP resources.展开更多
High-temperature treatment is key to the preparation of zeolite catalysts.Herein,the effects of hightemperature treatment on the property and performance of HZSM-5 zeolites were studied in this work.X-Ray diffraction,...High-temperature treatment is key to the preparation of zeolite catalysts.Herein,the effects of hightemperature treatment on the property and performance of HZSM-5 zeolites were studied in this work.X-Ray diffraction,N2physisorption,27Al magic angle spinning nuclear magnetic resonance(MAS NMR),and temperature-programmed desorption of ammonia results indicated that the hightemperature treatment at 650℃ hardly affected the inherent crystal and texture of HZSM-5zeolites but facilitated the conversion of framework Al to extra-framework Al,reducing the acid site and enhancing the acid strength.Moreover,the high-temperature treatment improved the performance of HZSM-5 zeolites in n-heptane catalytic cracking,promoting the conversion and light olefins yield while inhibiting coke formation.Based on the kinetic and mechanism analysis,the improvement of HZSM-5 performance caused by high-temperature treatment has been attributed to the formation of extra-framework Al,which enhanced the acid strength,facilitated the bimolecular reaction,and promoted the entropy change to overcome a higher energy barrier in n-heptane catalytic cracking.展开更多
Lightweight thin-walled structures with lattice infill are widely desired in satellite for their high stiffness-to-weight ratio and superior buckling strength resulting fromthe sandwich effect.Such structures can be f...Lightweight thin-walled structures with lattice infill are widely desired in satellite for their high stiffness-to-weight ratio and superior buckling strength resulting fromthe sandwich effect.Such structures can be fabricated bymetallic additive manufacturing technique,such as selective laser melting(SLM).However,the maximum dimensions of actual structures are usually in a sub-meter scale,which results in restrictions on their appliance in aerospace and other fields.In this work,a meter-scale thin-walled structure with lattice infill is designed for the fuel tank supporting component of the satellite by integrating a self-supporting lattice into the thickness optimization of the thin-wall.The designed structure is fabricated by SLM of AlSi10Mg and cold metal transfer welding technique.Quasi-static mechanical tests and vibration tests are both conducted to verify the mechanical strength of the designed large-scale lattice thin-walled structure.The experimental results indicate that themeter-scale thin-walled structure with lattice infill could meet the dimension and lightweight requirements of most spacecrafts.展开更多
Functional gastrointestinal disorders(FGIDs)are debilitating diseases of the digestive system that severely impair an individual’s qualityof life and impose a significant economic burden.However,themechanisms underly...Functional gastrointestinal disorders(FGIDs)are debilitating diseases of the digestive system that severely impair an individual’s qualityof life and impose a significant economic burden.However,themechanisms underlying the pathogenesis of FGIDs and effective treatment options remain unclear.Transcutaneous auricular vagus nerve stimulation(taVNS),a novel neuromodulation therapy,has shown promising therapeutic outcomes in the treatment of FGIDs.This study conducted a comprehensive analysis of the development of taVNS and its relationshipwith vagus nerve stimulation and explored the clinical application of taVNS inmanaging FGIDs,including functional dyspepsia,irritable bowel syndrome,and functional constipation.Additionally,this study investigated the pathophysiological mechanisms of taVNS in FGIDs and reviewed its application as a holistic treatment approach,aiming to provide new insights into its therapeutic potential.展开更多
Anthocyanins are a major subclass of flavonoids that have diverse biological functions and benefit human health.In rice(Oryza sativa),the various colors shown by organs are due mainly to the accumulation of anthocyani...Anthocyanins are a major subclass of flavonoids that have diverse biological functions and benefit human health.In rice(Oryza sativa),the various colors shown by organs are due mainly to the accumulation of anthocyanins and are traits associated with domestication.Elucidating the genetic basis of anthocyanin biosynthesis in rice would support the engineering of anthocyanins as well as shedding light on the evolutionary history of O.sativa.We summarize recent progress in rice anthocyanin biosynthesis research,including gene cloning,biosynthetic pathway discovery,and study of the domestication process.We discuss the application of anthocyanin biosynthesis genes in rice breeding.Our object is to broaden knowledge of the genetic basis of anthocyanin biosynthesis in rice and support the breeding of novel rice cultivars.展开更多
To improve the damage efficiency of compact terminal sensitive projectile with EFP warhead,it is vital to understand how the embedded structure(ES)affects the EFP forming performance.In this paper,the corresponding nu...To improve the damage efficiency of compact terminal sensitive projectile with EFP warhead,it is vital to understand how the embedded structure(ES)affects the EFP forming performance.In this paper,the corresponding numerical investigation is focused on,in which the fluid-structure interaction(FSI)method and the experimental verification are used.Based on the obtained quantitative relations between the forming performance and a(the ratio of height to maximum radius of ES),an optimal design is further provided.The results indicate that:when the embedded structural length and width range 0.1e0.3D and 0.1e0.2D(D:diameter of EFP warhead)at a fixed volume,respectively,EFP forming velocity nearly keeps as a constant,1760 m/s;the height of ES has a dramatical effect on the propagating range of detonation wave,resulting in significant influence on the aerodynamic shape and length-to-diameter ratio of EFP;under the given constraints,the EFP length-diameter ratio can reach the optimal value2.76,when the height of ES is 0.22D.展开更多
This paper presents an experimental study on the emission characteristics and combustion instabilities of oxy-fuel combustions in a swirl-stabilized combustor. Different oxygen concentrations (Xoxy=25%～45%, where Xox...This paper presents an experimental study on the emission characteristics and combustion instabilities of oxy-fuel combustions in a swirl-stabilized combustor. Different oxygen concentrations (Xoxy=25%～45%, where Xoxy is oxygen concentra- tion by volume), equivalence ratios (φ=0.75～1.15) and combustion powers (CP=1.08～2.02 kW) were investigated in the oxy-fuel (CH4/CO2/O2) combustions, and reference cases (Xoxy=25%～35%, CH4/N2/O2 flames) were covered. The results show that the oxygen concentration in the oxidant stream significantly affects the combustion delay in the oxy-fuel flames, and the equivalence ratio has a slight effect, whereas the combustion power shows no impact. The temperature levels of the oxy-fuel flames inside the combustion chamber are much higher (up to 38.7%) than those of the reference cases. Carbon monoxide was vastly produced when Xoxy>35% or φ>0.95 in the oxy-fuel flames, while no nitric oxide was found in the exhaust gases because no N2 participates in the combustion process. The combustion instability of the oxy-fuel combustion is very different from those of the reference cases with similar oxygen content. Oxy-fuel combustions excite strong oscillations in all cases studied Xoxy=25%～45%. However, no pressure fluctuations were detected in the reference cases when Xoxy>28.6% accomplished by heavily sooting flames which were not found in the oxy-fuel combustions. Spectrum analysis shows that the frequency of dynamic pressure oscillations exhibits randomness in the range of 50～250 Hz, therefore resulting in a very small resultant amplitude. Temporal oscillations are very strong with amplitudes larger than 200 Pa, even short time fast Fourier transform (FFT) analysis (0.08 s) shows that the pressure amplitude can be larger than 40 Pa.展开更多
Due to the insufficient slip systems,Mg and its alloys exhibit poor ductility during plastic deformation at room temperature.To solve this problem,alloying is considered as a most effective method to improve the ducti...Due to the insufficient slip systems,Mg and its alloys exhibit poor ductility during plastic deformation at room temperature.To solve this problem,alloying is considered as a most effective method to improve the ductility of Mg alloys,which attracts wide attentions of industries.However,it is still a challenge to understand the ductilization mechanism,because of the complicated alloying elements and their interactions with Mg matrix.In this work,pure Mg and Mg-Y alloys were comparatively studied to investigate the effect of Y addition on microstructure evolution and mechanical properties.A huge increase of uniform elongation,from 5.3%to 20.7%,was achieved via only 3 wt%addition of yttrium.TEM results revealed that the only activated slip system in pure Mg was basalslip,led to its poor ductility at room temperature.In contrast,a large number of stacking faults and non-basal dislocations with<c>component were observed in the deformed Mg-Y alloy,which was proposed as the main reason for significant improvement of strain hardening and ductility.High resolution TEM indicated that most of the stacking faults were II and 12 intrinsic faults,which played a critical role in improving the ductility of Mg-Y alloy.Addition of Y into Mg alloy decreased the stacking fault energy,which induced high density stacking faults in the grain interior.展开更多
The nucleation and growth mechanism of electrodeposited Ni−W alloy were investigated.Cyclic voltammetry(CV)and chronoamperometry(CA)were used to examine the electrochemical behavior and nucleation mechanism of the ele...The nucleation and growth mechanism of electrodeposited Ni−W alloy were investigated.Cyclic voltammetry(CV)and chronoamperometry(CA)were used to examine the electrochemical behavior and nucleation mechanism of the electrodeposited Ni−W alloy.The nucleation type and kinetic parameters of the electrodeposited Ni−W alloy were obtained from the CA analysis results.SEM,AFM,and TEM were also used to investigate the nucleation and growth process of the electrodeposition of Ni−W alloy.The results demonstrate that the nucleation and initial stages of the growth phase of the Ni−W alloy undergo the formation,movement,and aggregation of atoms,single crystals,and nanoclusters.When the size of single crystal increases up to approximately 10 nm and the average size of the crystal granules is approximately 68 nm,they no longer grow.Increasing the applied potential increases the number of nuclei but does not affect the size of the final crystal granules.Therefore,the electrodeposited Ni−W alloy shows a nanocrystalline structure.展开更多
基金supported by the National Natural Science Foundation of China(52475610)Zhejiang Provincial Natural Science Foundation of China(LDQ24E050001).
文摘Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm monitoring.To address these challenges,Prof.Seung Hwan Ko and Taek-Soo Kim’s team introduced a laserinduced phase separation and adhesion method for fabricating conductive hydrogels consisting of pure poly(3,4-ethylenedioxythiophene):polystyrene sulfonate on polymer substrates.The laser-induced phase separation and adhesion treated conducting polymers can be selectively transformed into conductive hydrogels that exhibit wet conductivities of 101.4 S cm^(−1) with a spatial resolution down to 5μm.Moreover,they maintain impedance and charge-storage capacity even after 1 h of sonication.The micropatterned electrode arrays demonstrate their potential in long-term in vivo signal recordings,highlighting their promising role in the field of bioelectronics.
基金Supported by The National Natural Science Foundation of China,No.82072130Key Medical Research Projects in Jiangsu Province,No.ZD2022021Suzhou Clinical Medical Center for Anesthesiology,No.Szlcyxzxj202102。
文摘BACKGROUND Hypernatremia represents a significant electrolyte imbalance associated with numerous adverse outcomes,particularly in cases of intensive care unit(ICU)-acquired hypernatremia(IAH).Nevertheless,its relevance in patients with septic shock remains uncertain.AIM To identify independent risk factors and their predictive efficacy for IAH to improve outcomes in patients with septic shock.METHODS In the present retrospective single-center study,a cohort of 157 septic shock patients with concurrent hypernatremia in the ICU at The First Affiliated Hospital of Soochow University,between August 1,2018,and May 31,2023,were analyzed.Patients were categorized based on the timing of hypernatremia occurrence into the IAH group(n=62),the non-IAH group(n=41),and the normonatremia group(n=54).RESULTS In the present study,there was a significant association between the high serum sodium concentrations,excessive persistent inflammation,immunosuppression and catabolism syndrome and chronic critical illness,while rapid recovery had an apparent association with normonatremia.Moreover,multivariable analyses revealed the following independent risk factors for IAH:Total urinary output over the preceding three days[odds ratio(OR)=1.09;95%CI:1.02–1.17;P=0.014],enteral nutrition(EN)sodium content of 500 mg(OR=2.93;95%CI:1.13–7.60;P=0.027),and EN sodium content of 670 mg(OR=6.19;95%CI:1.75–21.98;P=0.005)were positively correlated with the development of IAH.Notably,the area under the curve for total urinary output over the preceding three days was 0.800(95%CI:0.678–0.922,P=0.001).Furthermore,maximum serum sodium levels,the duration of hypernatremia,and varying sodium correction rates were significantly associated with 28-day in-hospital mortality in septic shock patients(P<0.05).CONCLUSION The present findings illustrate that elevated serum sodium level was significantly associated with a poor prognosis in septic shock patients in the ICU.It is highly recommended that hypernatremia be considered a potentially important prognostic indicator for the outcome of septic shock.
基金supported by the National Natural Science Foundation of China(51825802,52130803,52278020,and 72374121)the China National Key Research and Development Program(2018YFE0106100)+1 种基金the China Postdoctoral Science Foundation(2022M711815)the New Cornerstone Science Foundation through the XPLORER PRIZE.
文摘The life-cycle assessment method,which originates from general products and services,has gradually come to be applied to investigations of the life-cycle carbon emissions(LCCE)of buildings.A literature review was conducted to clarify LCCE implications,calculations,and reductions in the context of buildings.A total of 826 global building carbon emission calculation cases were obtained from 161 studies based on the framework of the building life-cycle stage division stipulated by ISO 21930 and the basic principles of the emission factor(EF)approach.The carbon emission calculation methods and results are discussed herein,based on the modules of production,construction,use,end-of-life,and supplementary benefits.According to the hotspot distribution of a building’s carbon emissions,carbon reduction strategies are classified into six groups for technical content and benefits analysis,including reducing the activity data pertaining to building materials and energy,reducing the carbon EFs of the building materials and energy,and exploiting the advantages of supplementary benefits.The research gaps and challenges in current building LCCE studies are summarized in terms of research goals and ideas,calculation methods,basic parameters,and carbon reduction strategies;development suggestions are also proposed.
基金jointly supported by the National Key Research and Development Program of China(Grant No.2022YFE0106500)Jiangsu Science Fund for Distinguished Young Scholars(Grant No.BK20200040)。
文摘The pan-Arctic is confronted with air pollution transported from lower latitudes.Observations have shown that aerosols help increase plant photosynthesis through the diffuse radiation fertilization effects(DRFEs).While such DRFEs have been explored at low to middle latitudes,the aerosol impacts on pan-Arctic ecosystems and the contributions by anthropogenic and natural emission sources remain less quantified.Here,we perform regional simulations at 0.2o×0.2ousing a well-validated vegetation model(Yale Interactive terrestrial Biosphere,YIBs)in combination with multi-source of observations to quantify the impacts of aerosol DRFEs on the net primary productivity(NPP)in the pan-Arctic during 2001-19.Results show that aerosol DRFEs increase pan-Arctic NPP by 2.19 Pg C(12.8%)yr^(-1)under clear-sky conditions,in which natural and anthropogenic sources contribute to 8.9% and 3.9%,respectively.Under all-sky conditions,such DRFEs are largely dampened by cloud to only 0.26 Pg C(1.24%)yr^(-1),with contributions of 0.65% by natural and 0.59% by anthropogenic species.Natural aerosols cause a positive NPP trend of 0.022% yr^(-1)following the increased fire activities in the pan-Arctic.In contrast,anthropogenic aerosols induce a negative trend of-0.01% yr^(-1)due to reduced emissions from the middle latitudes.Such trends in aerosol DRFEs show a turning point in the year of 2007 with more positive NPP trends by natural aerosols but negative NPP trends by anthropogenic aerosols thereafter.Though affected by modeling uncertainties,this study suggests a likely increasing impact of aerosols on terrestrial ecosystems in the pan-Arctic under global warming.
基金supported by the Key R&D projects in Xinjiang (2022B01042)Research and Innovation Team Cultivation Plan of Yili Normal University (#CXZK2021002)。
文摘Humic acids(HAs)are widely used as filtrate and viscosity reducers in drilling fluids.However,their practical utility is limited due to poor stability in salt resistance and high-temperature resistance.Hightemperature coal pitch(CP)is a by-product from coal pyrolysis above 650℃.The substance's molecular structure is characterized by a dense arrangement of aromatic hydrocarbon and alkyl substituents.This unique structure gives it unique chemical properties and excellent drilling performance,surpassing traditional humic acids in drilling operations.Potassium humate is prepared from CP(CP-HA-K)by thermal catalysis.A new type of high-quality humic acid temperature-resistant viscosity-reducer(Graft CP-HA-K polymer)is synthesized with CP-HA-K,hydrolyzed polyacrylonitrile sodium salt(Na-HPAN),urea,formaldehyde,phenol and acrylamide(AAM)as raw materials.The experimental results demonstrate that the most favorable conditions for the catalytic preparation of CP-HA-K are 1 wt%catalyst dosage,30 wt%KOH dosage,a reaction temperature of 250℃,and a reaction time of 2 h,resulting in a maximum yield of CP-HA-K of 39.58%.The temperature resistance of the Graft CP-HA-K polymer is measured to be 177.39℃,which is 55.39℃ higher than that of commercial HA-K.This is due to the abundant presence of amide,hydroxyl,and amine functional groups in the Graft CP-HA-K polymer,which increase the length of the carbon chains,enhance the electrostatic repulsion on the surface of solid particles.After being aged to 120℃ for a specified duration,the Graft CP-HA-K polymer demonstrates significantly higher viscosity reduction(42.12%)compared to commercial HA-K(C-HA-K).Furthermore,the Graft CP-HA-K polymer can tolerate a high salt concentration of 8000 mg.L-1,measured after the addition of optimum amount of 3 wt%Graft CP-HA-K polymer.The action mechanism of Graft CP-HA-K polymer on high-temperature drilling fluid is that the Graft CP-HA-K polymer can increase the repulsive force between solid particles and disrupt bentonite's reticulation structure.Overall,this research provides novelty insights into the synthesis of artificial humic acid materials and the development of temperature-resistant viscosity reducers,offering a new avenue for the utilization of CP resources.
基金the financial support from the National Natural Science Foundation of China(21908010)Jilin Provincial Department of Science and Technology(20220101089JC)the Education Department of Jilin Province(JJKH20220694KJ)。
文摘High-temperature treatment is key to the preparation of zeolite catalysts.Herein,the effects of hightemperature treatment on the property and performance of HZSM-5 zeolites were studied in this work.X-Ray diffraction,N2physisorption,27Al magic angle spinning nuclear magnetic resonance(MAS NMR),and temperature-programmed desorption of ammonia results indicated that the hightemperature treatment at 650℃ hardly affected the inherent crystal and texture of HZSM-5zeolites but facilitated the conversion of framework Al to extra-framework Al,reducing the acid site and enhancing the acid strength.Moreover,the high-temperature treatment improved the performance of HZSM-5 zeolites in n-heptane catalytic cracking,promoting the conversion and light olefins yield while inhibiting coke formation.Based on the kinetic and mechanism analysis,the improvement of HZSM-5 performance caused by high-temperature treatment has been attributed to the formation of extra-framework Al,which enhanced the acid strength,facilitated the bimolecular reaction,and promoted the entropy change to overcome a higher energy barrier in n-heptane catalytic cracking.
基金The authors are grateful for the support by National Key Research and Development Program of China(2021YFF0500300,2020YFB1708300)the National Natural Science Foundation of China(52205280,12172041).
文摘Lightweight thin-walled structures with lattice infill are widely desired in satellite for their high stiffness-to-weight ratio and superior buckling strength resulting fromthe sandwich effect.Such structures can be fabricated bymetallic additive manufacturing technique,such as selective laser melting(SLM).However,the maximum dimensions of actual structures are usually in a sub-meter scale,which results in restrictions on their appliance in aerospace and other fields.In this work,a meter-scale thin-walled structure with lattice infill is designed for the fuel tank supporting component of the satellite by integrating a self-supporting lattice into the thickness optimization of the thin-wall.The designed structure is fabricated by SLM of AlSi10Mg and cold metal transfer welding technique.Quasi-static mechanical tests and vibration tests are both conducted to verify the mechanical strength of the designed large-scale lattice thin-walled structure.The experimental results indicate that themeter-scale thin-walled structure with lattice infill could meet the dimension and lightweight requirements of most spacecrafts.
基金supported by Scientific and Technological Research Program of Chongqing Municipal Education Commission:Mechanism of taVNS alleviate low-grade inflammation of duodenal mucosa through IRG1/GATA3 signaling pathway(No.KJ2023151103563799)General Program of Natural Science Foundation of Chongqing:Mechanism of auricular point stimulation via the vagus nerve in the treatment of FD based on GATA3 signaling pathway(No.CSTB2022NSCQ-MSX1559)+1 种基金General Program of Natural Science Foundation of Sichuan Province:The mechanism and clinical empirical study of the regulation of ITAGATA3 signaling pathway by AVNS in the treatment of chronic insomnia comorbidities dyspepsia in the elderly(No.24NSFSC1238)To investigate the mechanism of taVNS in treating insomnia based on brain-gut-bacteria axis(No.SQMS2024QNXM-019).
文摘Functional gastrointestinal disorders(FGIDs)are debilitating diseases of the digestive system that severely impair an individual’s qualityof life and impose a significant economic burden.However,themechanisms underlying the pathogenesis of FGIDs and effective treatment options remain unclear.Transcutaneous auricular vagus nerve stimulation(taVNS),a novel neuromodulation therapy,has shown promising therapeutic outcomes in the treatment of FGIDs.This study conducted a comprehensive analysis of the development of taVNS and its relationshipwith vagus nerve stimulation and explored the clinical application of taVNS inmanaging FGIDs,including functional dyspepsia,irritable bowel syndrome,and functional constipation.Additionally,this study investigated the pathophysiological mechanisms of taVNS in FGIDs and reviewed its application as a holistic treatment approach,aiming to provide new insights into its therapeutic potential.
基金supported by the National Natural Science Foundation of China(Nos.52171125,52071178)The fundamental Research Funds for the Central Universities,China(No.2682020ZT114)+1 种基金the Key R&D Projects in the Field of High and New Technology of Sichuan Province,China(Nos.20ZDYF0490,20ZDYF0236)Open Funding of International Joint Laboratory for Light Alloys(MOE),Chongqing University,China。
基金supported by the National Program on R&D of Transgenic Plants(2016ZX08009003-004)the National Natural Science Foundation of China(91935303,32001530)+1 种基金the China Agriculture Research System(CARS-01-03)the Postdoctoral Science Foundation of China(2020M682441)。
文摘Anthocyanins are a major subclass of flavonoids that have diverse biological functions and benefit human health.In rice(Oryza sativa),the various colors shown by organs are due mainly to the accumulation of anthocyanins and are traits associated with domestication.Elucidating the genetic basis of anthocyanin biosynthesis in rice would support the engineering of anthocyanins as well as shedding light on the evolutionary history of O.sativa.We summarize recent progress in rice anthocyanin biosynthesis research,including gene cloning,biosynthetic pathway discovery,and study of the domestication process.We discuss the application of anthocyanin biosynthesis genes in rice breeding.Our object is to broaden knowledge of the genetic basis of anthocyanin biosynthesis in rice and support the breeding of novel rice cultivars.
基金funded by the National Natural Science Foundation of China under No. 11102088Fundamental Research Funds for the Central Universities under No. 30915118821funded by the Specialized Research Fund for the Doctoral Program of Higher Education of China under No. 20133219110019
文摘To improve the damage efficiency of compact terminal sensitive projectile with EFP warhead,it is vital to understand how the embedded structure(ES)affects the EFP forming performance.In this paper,the corresponding numerical investigation is focused on,in which the fluid-structure interaction(FSI)method and the experimental verification are used.Based on the obtained quantitative relations between the forming performance and a(the ratio of height to maximum radius of ES),an optimal design is further provided.The results indicate that:when the embedded structural length and width range 0.1e0.3D and 0.1e0.2D(D:diameter of EFP warhead)at a fixed volume,respectively,EFP forming velocity nearly keeps as a constant,1760 m/s;the height of ES has a dramatical effect on the propagating range of detonation wave,resulting in significant influence on the aerodynamic shape and length-to-diameter ratio of EFP;under the given constraints,the EFP length-diameter ratio can reach the optimal value2.76,when the height of ES is 0.22D.
基金Project supported by the National Natural Science Foundation of China (No. 50576081)Zhejiang Provincial Natural Science Foundation of China (No. R107532)+1 种基金Program for the New Century Excellent Talents in University (No. NCET-07-0761)the Foundation for the Author of National Excellent Doctoral Dissertation of China (No. 200747)
文摘This paper presents an experimental study on the emission characteristics and combustion instabilities of oxy-fuel combustions in a swirl-stabilized combustor. Different oxygen concentrations (Xoxy=25%～45%, where Xoxy is oxygen concentra- tion by volume), equivalence ratios (φ=0.75～1.15) and combustion powers (CP=1.08～2.02 kW) were investigated in the oxy-fuel (CH4/CO2/O2) combustions, and reference cases (Xoxy=25%～35%, CH4/N2/O2 flames) were covered. The results show that the oxygen concentration in the oxidant stream significantly affects the combustion delay in the oxy-fuel flames, and the equivalence ratio has a slight effect, whereas the combustion power shows no impact. The temperature levels of the oxy-fuel flames inside the combustion chamber are much higher (up to 38.7%) than those of the reference cases. Carbon monoxide was vastly produced when Xoxy>35% or φ>0.95 in the oxy-fuel flames, while no nitric oxide was found in the exhaust gases because no N2 participates in the combustion process. The combustion instability of the oxy-fuel combustion is very different from those of the reference cases with similar oxygen content. Oxy-fuel combustions excite strong oscillations in all cases studied Xoxy=25%～45%. However, no pressure fluctuations were detected in the reference cases when Xoxy>28.6% accomplished by heavily sooting flames which were not found in the oxy-fuel combustions. Spectrum analysis shows that the frequency of dynamic pressure oscillations exhibits randomness in the range of 50～250 Hz, therefore resulting in a very small resultant amplitude. Temporal oscillations are very strong with amplitudes larger than 200 Pa, even short time fast Fourier transform (FFT) analysis (0.08 s) shows that the pressure amplitude can be larger than 40 Pa.
基金the National Key R&D Program of China(2017YFA0204403)National Natural Science Foundation of China(51601003,51901103)the Fundamental Research Funds for the Central Universities(30918011342).
文摘Due to the insufficient slip systems,Mg and its alloys exhibit poor ductility during plastic deformation at room temperature.To solve this problem,alloying is considered as a most effective method to improve the ductility of Mg alloys,which attracts wide attentions of industries.However,it is still a challenge to understand the ductilization mechanism,because of the complicated alloying elements and their interactions with Mg matrix.In this work,pure Mg and Mg-Y alloys were comparatively studied to investigate the effect of Y addition on microstructure evolution and mechanical properties.A huge increase of uniform elongation,from 5.3%to 20.7%,was achieved via only 3 wt%addition of yttrium.TEM results revealed that the only activated slip system in pure Mg was basalslip,led to its poor ductility at room temperature.In contrast,a large number of stacking faults and non-basal dislocations with<c>component were observed in the deformed Mg-Y alloy,which was proposed as the main reason for significant improvement of strain hardening and ductility.High resolution TEM indicated that most of the stacking faults were II and 12 intrinsic faults,which played a critical role in improving the ductility of Mg-Y alloy.Addition of Y into Mg alloy decreased the stacking fault energy,which induced high density stacking faults in the grain interior.
基金financial support from the Science and Technology Project of Hunan Province,China(No.2018TP1012)。
文摘The nucleation and growth mechanism of electrodeposited Ni−W alloy were investigated.Cyclic voltammetry(CV)and chronoamperometry(CA)were used to examine the electrochemical behavior and nucleation mechanism of the electrodeposited Ni−W alloy.The nucleation type and kinetic parameters of the electrodeposited Ni−W alloy were obtained from the CA analysis results.SEM,AFM,and TEM were also used to investigate the nucleation and growth process of the electrodeposition of Ni−W alloy.The results demonstrate that the nucleation and initial stages of the growth phase of the Ni−W alloy undergo the formation,movement,and aggregation of atoms,single crystals,and nanoclusters.When the size of single crystal increases up to approximately 10 nm and the average size of the crystal granules is approximately 68 nm,they no longer grow.Increasing the applied potential increases the number of nuclei but does not affect the size of the final crystal granules.Therefore,the electrodeposited Ni−W alloy shows a nanocrystalline structure.
