Intermittent disturbance mechanical behavior and fractional deterioration mechanical model of rock under complex true triaxial stress paths

Mechanical excavation,blasting,adjacent rockburst and fracture slip that occur during mining excavation impose dynamic loads on the rock mass,leading to further fracture of damaged surrounding rock in three-dimensional high-stress and even causing disasters.Therefore,a novel complex true triaxial static-dynamic combined loading method reflecting underground excavation damage and then frequent intermittent disturbance failure is proposed.True triaxial static compression and intermittent disturbance tests are carried out on monzogabbro.The effects of intermediate principal stress and amplitude on the strength characteristics,deformation characteristics,failure characteristics,and precursors of monzogabbro are analyzed,intermediate principal stress and amplitude increase monzogabbro strength and tensile fracture mechanism.Rapid increases in microseismic parameters during rock loading can be precursors for intermittent rock disturbance.Based on the experimental result,the new damage fractional elements and method with considering crack initiation stress and crack unstable stress as initiation and acceleration condition of intermittent disturbance irreversible deformation are proposed.A novel three-dimensional disturbance fractional deterioration model considering the intermediate principal stress effect and intermittent disturbance damage effect is established,and the model predicted results align well with the experimental results.The sensitivity of stress states and model parameters is further explored,and the intermittent disturbance behaviors at different f are predicted.This study provides valuable theoretical bases for the stability analysis of deep mining engineering under dynamic loads.

Configuration Design and Size Optimization of a High-Precision Novel Parallel Pointing Mechanism Based on Interference Separation

Pointing mechanism is widely used in aerospace field,and its pointing accuracy and stability have high requirements.The pointing mechanism will be affected by external interference when it works.In order to eliminate the impact of interference forces on the output accuracy of the mechanism,firstly,this paper proposes a design method for highprecision pointing mechanisms based on interference separation,aiming at the high-precision pointing requirements of pointing mechanisms.Based on the screw theory,a synthesis method for inner compensation mechanisms has been proposed.And a new type of double-layer parallel mechanism has been designed to compensate for interference forces.Then,the kinematics and dynamics of the mechanism are carried out.An evaluation index for compensating external interference forces is proposed.The interference compensation analysis is conducted for the pointing mechanism.The correctness of the proposed interference force compensation coefficient is verified.Finally,in order to find the optimal solution for the workspace and interference force compensation coefficient of the pointing mechanism,multi-objective optimization design of the structural parameters of the mechanism was carried out based on the particle swarm optimization algorithm.This provides a theoretical basis for the prototype design of the subsequent double-layer parallel mechanism.This double-layer parallel mechanism combines the advantages of large load-bearing capacity,large workspace,and high output accuracy.It can be better applied in the aerospace field where high-precision pointing and force interference compensation are integrated.

Dynamic recrystallization behavior and mechanical properties of bimodal scale Al2O3 reinforced AZ31 composites by soild state synthesis

In this paper,(500 nm 1%+5μm 3%)bimodal scale Al2O3p/AZ31 composites was fabricated by solid state synthesis and the effect of bimodal scale Al2O3 particulates on its dynamic recrystallization behavior and mechanical properties was investigated.The optical microscopy,scanning electron microscopy,transmission electron microscopy and electron universal strength tester composites were used to characterize the composites.The results indicate that the grains size of the composites are significantly refined and the mechanical properties are obviously improved.Due to the presence of the bimodal scale Al2o3 particulates,the high-density dislocation zone is formed around nano-Al2o3p and the particle deformation zone is formed near micron-ABOap.These zones are ideal sites for the formation of recrystallization nucleus.Meanwhile,the addition of the bimodal scale Al2o3 particulates may delay or hinder the growth of matrix grain through the pining effect on the grain boundaries,resulting in significantly improving the yield strength and tensile strength of Al2O3p/AZ31 composites.

中国儿童照护预算变迁的间断-均衡模型——基于2007—2019年省级面板数据的分析

值此三胎政策施行之际,儿童照护政策作为提振生育意愿、完善社会保障体系的重要治理工具引起各方重视。基于2007—2019年各省级幼儿园预算内教育经费面板数据,研究通过计算预算比率变化、L-K值等方法实证分析我国儿童照护预算的变迁间断性情况,并采用固定效应模型分析政府注意力、政策图景和制度摩擦对儿童照护预算间断性的影响。研究发现,我国儿童照护预算变迁遵循间断-均衡逻辑,政府注意力、家庭摩擦对儿童照护预算有显著影响,政策图景、社会制度摩擦和市场制度摩擦的影响不显著。这说明我国政治体制会放大预算间断性,媒体信息则无法显著影响间断性,政府与社会的交互关系塑造了儿童照护预算变迁模式的基本特征。本研究为儿童照护研究提供了预算变迁的分析视角,并提出树立儿童权利本位、注重政策目标延续性、加强对社会照护服务的经济支持的政策建议。

TiO_(2)/SnO_(2)electron transport double layers with ultrathin SnO_(2)for efficient planar perovskite solar cells

The electron transport layer(ETL)plays an important role on the performance and stability of perovskite solar cells(PSCs).Developing double ETL is a promising strategy to take the advantages of different ETL materials and avoid their drawbacks.Here,an ultrathin SnO_(2)layer of~5 nm deposited by atomic layer deposit(ALD)was used to construct a TiO_(2)/SnO_(2)double ETL,improving the power conversion efficiency(PCE)from 18.02%to 21.13%.The ultrathin SnO_(2)layer enhances the electrical conductivity of the double layer ETLs and improves band alignment at the ETL/perovskite interface,promoting charge extraction and transfer.The ultrathin SnO_(2)layer also passivates the ETL/perovskite interface,suppressing nonradiative recombination.The double ETL achieves outstanding stability compared with PSCs with TiO_(2)only ETL.The PSCs with double ETL retains 85%of its initial PCE after 900 hours illumination.Our work demonstrates the prospects of using ultrathin metal oxide to construct double ETL for high-performance PSCs.

A multi-index coupling system of ice slope stability and its application

Based on the Simplified Bishop Method, the minimum safety factor of ice slope both with and without tension cracks is calculated in combination with triaxial compression tests. It is found that there exists a critical depth for each crack. Then, factors influencing ice slope stability such as slope ratio, slope height, ice cohesion, internal friction angle, unit weight and temperature were analyzed. Meanwhile, a regression equation between the aforementioned factors and safety factor is obtained, with which sensitivity analysis is carried out. The performance function is built in combination with random distribution of physical and mechanical parameters to analyze the reliability index. The Advanced First Order Second Moment Method is employed on the solution to the perfor- mance function. The one-way coupling system of ice slope stability is therefore formed based on safety factor and reliability index. Finally, an illustrated example of ice slope is provided, which shows that failure probability is relatively high, up to 6.18%, alt- hough safety factor is 2.77. Thus, it is objective and reasonable to apply the coupled system method to the slope stability rating.

磁控溅射沉积Ni-DLC涂层摩擦磨损性能研究及预测

为提高风电轴承的摩擦磨损性能、延长使用寿命,从而降低运维成本,以硬度、摩擦系数和磨损率为摩擦磨损性能的评价指标。在42GrMo钢基体使用非平衡磁控溅射沉积技术沉积Ni-DLC复合涂层,对复合涂层进行摩擦磨损实验和划痕实验,测试涂层的硬度、摩擦系数和磨损率,控制磁控溅射工艺参数研究其对评价指标的影响规律。基于正交实验,建立指数回归预测模型和BP神经网络预测模型,通过实验验证了指数回归预测模型具有较好的精度,可指导实际生产,具有一定的理论意义。

Effect of glucose concentrations on wear resistance of Al/APC composites prepared by hydrothermal carbonized deposition on chips

In this study,a novel method termed hydrothermal carbonized deposition on chips(HTCDC)is proposed to prepare aluminum alloy-amorphous carbon(Al/APC)composites.The influences of glucose concentration in hydrothermally reaction on the microstructure and wear resistance of the Al/APC composites were thoroughly studied.Amorphous carbon was deposited by HTCDC onto Al–20Si chips as a supporter.The Al/APC composites were prepared by hot extrusion from the chips.The results indicated that a uniform carbon film was successfully synthesized on the surface of the chips,improving the wear resistance of the Al/APC composites.With increasing concentration of glucose solution,the size and the number of delamination on the wear surface and the coefficient of friction decreased,and the wear rate decreased at first and then increased.In addition,the dehydration and carbonization processes in the hydrothermal reaction of glucose were analyzed.A schematic model of the wear surface of the Al/APC composites was established and the wear mechanisms were discussed.

Strengthening mechanism of B_4C@APC/Al matrix composites reinforced with bimodal-sized particles prepared by hydrothermal carbonized deposition on chips

A B_(4)C@amorphous carbon(APC)/Al matrix composite was fabricated by using hydrothermal carbonized deposition on chips(HTCDC)process and solid-state synthesis process.The microstructure and mechanical properties of the B_(4)C@APC/Al matrix composite were investigated.After HTCDC process,nano-B_(4)C particles(50 nm)and micron-sized B_(4)C@APC core-shell spheres with a diameter of 2μm were found in the composites.The microhardness of the micron-sized B_(4)C@APC spheres is 1.66 GPa,which is greater than that of theα-Al matrix(1.06 GPa).Dislocation accumulation is observed around the micron-sized B_(4)C@APC spheres,indicating that the micron-sized B_(4)C@APC spheres have a strengthening effect on theα-Al matrix.Due to the formation of micron-sized B_(4)C@APC spheres,the reinforcement of nano-B_(4)C particles into the composites is transformed from single-sized particle enhancement to bimodal-sized particle enhancement.The strengthening mechanism for B_(4)C@APC/Al matrix composites with bimodalsized particles of nano-B_(4)C and micron-sized B_(4)C@APC spheres were analyzed,which includes thermal mismatch strengthening generated by the mismatch of coefficient of thermal expansion(CTE)between micron-sized B_(4)C@APC core-shell spheres andα-Al matrix,Orowan strengthening produced by nano-B_(4)C particles,Hall-Petch strengthening and load transfer strengthening produced by the bimodal-sized enhancement from nano and microspheres.A relationship model between the yield strength(YS)increment and the conversion rate(x)of micron-sized B_(4)C@APC core-shell spheres was estimated.