Enhanced stability and rate performance of zinc-doped cobalt hexacyanoferrate (CoZnHCF) by the limited crystal growth and reduced distortion

Cobalt hexacyanoferrate (CoHCF) is a potential cathode for aqueous Na-ion batteries due to its high theoretical specific capacity (170 m Ah g^(-1));however,its lower rate capability and cyclability limit its applications.Structural distortion at a weak N-coordinated crystal field during cycling disintegrates Co,yielding an irreversible reaction.Different Zn amounts ranging 0–1 were added to the Co site to suppress the structural irreversibility of CoHCF,yielding Co_(1-x)Zn_(x)HCF powder;this Zn (x≤0.09) addition reduced the powder’s dimension because the lower four coordination of Zn–N,not the six coordination of Co–N,limits the powder growth.Simultaneously,a small lattice parameter and interaxial angle (~90°) are obtained,implying that a narrower Co_(1-x)Zn_(x)HCF inner structure is formed to accommodate Na ions.Moreover,the electronic conductivity of Co_(1-x)Zn_(x)HCF gradually increased within 0–0.09 range.A smaller particle size with a high surface area leads to a near-surface-limited redox process,similar to a capacitive reaction.Both the surface-limited reaction and electronic conductivity enhances the reversibility due to the smaller charge transfer resistance at the electrode/electrolyte interface caused by Zn addition.Replacing redox-active Co with non-active Zn amount of 0.07 (Co_(1-x)Zn_(x)HCF) slightly reduces the specific capacity from 127 to 119 mAh g^(-1)at 0.1 A g^(-1)due to the shrunken Co charging sites.Rate performance is enhanced by compromising the capacity and reduced distortion,resulting in 81%retention at a 20-times-faster charging rate.Notably,the Co_(1-x)Zn_(x)HCF sample exhibited the good stability while preserving 74%of the initial capacity at 0.5 A g^(-1)after 200 cycles.

Photonic control of ligand nanospacing in self-assembly regulates stem cell fate

Extracellular matrix(ECM)undergoes dynamic inflation that dynamically changes ligand nanospacing but has not been explored.Here we utilize ECM-mimicking photocontrolled supramolecular ligand-tunable Azo^(+)self-assembly composed of azobenzene derivatives(Azo^(+))stacked via cation-πinteractions and stabilized with RGD ligand-bearing poly(acrylic acid).Near-infrared-upconverted-ultraviolet light induces cis-Azo^(+)-mediated inflation that suppresses cation-πinteractions,thereby inflating liganded self-assembly.This inflation increases nanospacing of“closely nanospaced”ligands from 1.8 nm to 2.6 nm and the surface area of liganded selfassembly that facilitate stem cell adhesion,mechanosensing,and differentiation both in vitro and in vivo,including the release of loaded molecules by destabilizing water bridges and hydrogen bonds between the Azo^(+)molecules and loaded molecules.Conversely,visible light induces trans-Azo^(+)formation that facilitates cation-πinteractions,thereby deflating self-assembly with“closely nanospaced”ligands that inhibits stem cell adhesion,mechanosensing,and differentiation.In stark contrast,when ligand nanospacing increases from 8.7 nm to 12.2 nm via the inflation of self-assembly,the surface area of“distantly nanospaced”ligands increases,thereby suppressing stem cell adhesion,mechanosensing,and differentiation.Long-term in vivo stability of self-assembly via real-time tracking and upconversion are verified.This tuning of ligand nanospacing can unravel dynamic ligand-cell interactions for stem cell-regulated tissue regeneration.

All-fiber acousto-optic modulator based on a cladding-etched optical fiber for active mode-locking

An all-fiber acousto-optic modulator(AOM), which features a compact structure and a low-driving voltage, is experimentally demonstrated for the active mode-locking of a fiber laser. The proposed AOM is based on the short length of the cladding-etched fiber, the ends of which are fixed on a slide glass. On top of the cladding-etched fiber, a piezoelectric transducer was overlaid. A chemical wet-etching technique, which is based on a mixed solution of NH_4F and (NH_4)2SO_4, is used to reduce the fiber diameter down to ～25 μm, and the length of the etched section is only 0.5 cm. The fabricated device exhibited a modulation depth of 73.10% at an acoustic frequency of 918.9 kHz and a peak-to-peak electrical voltage of 10 V, while a laser beam was coupled at 1560 nm.By using the prepared AOM within an erbium-doped-fiber ring cavity, the mode-locked pulses with a temporalwidth of 2.66 ps were readily obtained at a repetition rate of 1.838 MHz.