The application for FC-Mold(Flow Control Mold)technology is researched in Ansteel slab caster,and the fluctuations of liquid steel in different parameters are emphasis researched.The results show that the fluctuation ...The application for FC-Mold(Flow Control Mold)technology is researched in Ansteel slab caster,and the fluctuations of liquid steel in different parameters are emphasis researched.The results show that the fluctuation of liquid steel can be decreased 50%by using FC-Mold,and the value is decreased from±5mm to±2mm.The casting velocity can be increased 0.5m/min by using FC-Mold.The effect of FC-Mold is increased with increasing of current.And FC-Mold can restrain the unstable liquid steel from velocity changing.The statistic application results for 610 strands show that the degraded ratio for automobile steel is decreased 6%.展开更多
In this paper,the best final EMS frequency for bloom continuous casting is proposed.For 280×380 bloom,the best frequency is in the range of 4;Hz.Simulation results also show that,with this frequency,the electroma...In this paper,the best final EMS frequency for bloom continuous casting is proposed.For 280×380 bloom,the best frequency is in the range of 4;Hz.Simulation results also show that,with this frequency,the electromagnetic force in the molten steel in the bloom reaches stronger and the electromechanical transformation rate of the stirring equipment is higher.The flow fields in the bloom with the various stirring parameters are simulated also.The final EMS parameters for bloom are optimized base on the simulation results.The experimental results show that,for high carbon steel,the best stirring frequency is 7 Hz and the current is 500A.In order to alleviate negative segregation of the low and medium carbon steel,the stirring frequency and the current should be 4Hz and 430A,respectively.展开更多
基金Item Sponsored by the Postdoctoral Gathering Project in Liaoning Province[No.2011921003]
文摘The application for FC-Mold(Flow Control Mold)technology is researched in Ansteel slab caster,and the fluctuations of liquid steel in different parameters are emphasis researched.The results show that the fluctuation of liquid steel can be decreased 50%by using FC-Mold,and the value is decreased from±5mm to±2mm.The casting velocity can be increased 0.5m/min by using FC-Mold.The effect of FC-Mold is increased with increasing of current.And FC-Mold can restrain the unstable liquid steel from velocity changing.The statistic application results for 610 strands show that the degraded ratio for automobile steel is decreased 6%.
基金Item Sponsored by the Postdoctoral gathering project in Liaoning Province(No.2011921003)
文摘In this paper,the best final EMS frequency for bloom continuous casting is proposed.For 280×380 bloom,the best frequency is in the range of 4;Hz.Simulation results also show that,with this frequency,the electromagnetic force in the molten steel in the bloom reaches stronger and the electromechanical transformation rate of the stirring equipment is higher.The flow fields in the bloom with the various stirring parameters are simulated also.The final EMS parameters for bloom are optimized base on the simulation results.The experimental results show that,for high carbon steel,the best stirring frequency is 7 Hz and the current is 500A.In order to alleviate negative segregation of the low and medium carbon steel,the stirring frequency and the current should be 4Hz and 430A,respectively.
