Nanoindentation behavior and creep-induced cracking of long-term crept austenitic steel at 650℃

The grain boundary(GB)damage of long-term crept HR3C(25Cr–20Ni–Nb–N)austenitic steel with solid solution state was investigated by nanoindentation test accompanied with in-situ electron back-scattered diffraction.The corresponding microstructure was characterized by scanning electron microscopy and transmission electron microscopy.Results show that the increase in nanoindentation hardness at the GBs and triple grain junctions may be related to the dislocation accumulation and carbide growth during the creep.Coarsened M23C6 and dislocations piling-up at the GB accelerate the nucleation and coalescence of creep cavity along the GB.The nanoindentation hardness in grains varies with orientation of the stress axis.The orientation difference of neighbor grains may induce local high geometrically necessary dislocation densities and strain gradients near the GB,consequently causing stress concentration and subsequent crack growth at specific GBs.

Development of an indirect competitive ELISA for simultaneous detection of enrofloxacin and ciprofloxacin

Modified 1-ethyl-3-(3-dimethylaminopropy) carbodiimide(EDC) method was employed to synthesize the artificial antigen of enrofloxacin(ENR),and New Zealand rabbits were used to produce anti-ENR polyclonal antibody(pAb).Based on the checkerboard titration,an indirect competitive enzyme-linked immunosorbent assay(ELISA) standard curve was established.This assay was sensitive and had a linear range from 0.6 to 148.0 μg/kg(R2=0.9567),with the half maximal inhibitory concentration(IC50) and limit of detection(LOD) values of 9.4 μg/kg and 0.2 μg/kg,respectively.Of all the competitive analogues,the produced pAb exhibited a high cross-reactivity to ciprofloxacin(CIP)(87%),the main metabolite of ENR in tissues.After optimization,the matrix effects can be ignored using a 10-fold dilution in beef and 20-fold dilution in pork.The overall recoveries and coefficients of variation(CVs) were in the ranges of 86%-109% and 6.8%-13.1%,respectively.It can be concluded that the established ELISA method is suitable for simultaneous detection of ENR and CIP in animal tissues.

Prediction and Control of Thermal Scratch Defect on Surface of Strip in Tandem Cold Rolling

The thermal scratch significantly influences the surface quality of the cold rolled stainless steel strip. In or der to establish a precise mathematical model of oil film thickness in deformation zone, the lubrication in cold rolling process of B443NT stainless steel strip was studied in the laboratory. According to the principle of statistics, a math- ematical model of critical oil film thickness in deformation zone for thermal scratch was built, with fitting and regres- sion analytical method, and then based on temperature comparison method, the criterion for deciding thermal scratch defect was put forward. Storing and calling data through SQI. Server 2005, a software on thermal scratch control was developed in the Microsoft Visual Studio 2008 environment by MFC technique for stainless steel in tandem cold roll- ing, and then it was used into the practical production. Statistical results demonstrated that the hit rate of thermal scratch arrives at 91.47%, the occurrence rate of thermal scratch is decreased by 87.81%, and rolling speed is in- creased by 7.3%. The developed software is of significance to the control of products quality of stainless steel strips, and the analysis and solution to the problem of thermal scratch defects in tandem cold rolling.

Thermal Scratch on Surface of SUS430 Stainless Steel Strip in Cold Rolling Process

The thermal scratch significantly influences the surface quality of the stainless steel in cold strip rolling. The thermal scratch has a close relation to the rolling parameters, the rolls surface and the emulsions used in rolling. In order to explain the thermal scratch on the strip surface, the cold roiling process of SUS430 stainless steel strip was investigated in the laboratory. The thermal scratch defect occurs frequently in the second rolling pass （maximum reduction in height is 32.3 ~）, especially on the lower surface of strips. When concentration and temperature of the emulsion are the same, the thermal scratch on the surface o{ the strip is aggravated with increasing the roll surface roughness. With the same roll surface roughness and emulsion concentration, the thermal scratch is obviously more severe at an emulsion temperature of 63 ℃ than 55 ℃. With the same roll surface roughness and emulsion tempera- ture, the thermal scratch is distinctly weaker at the emulsion concentration of 6 % than that of 3 %.

Development of an indirect competitive ELISA for simultaneous detection of enrofloxacin and ciprofloxacin

Modified 1-ethyl-3-(3-dimethylaminopropy) carbodiimide(EDC) method was employed to synthesize the artificial antigen of enrofloxacin(ENR),and New Zealand rabbits were used to produce anti-ENR polyclonal antibody(pAb).Based on the checkerboard titration,an indirect competitive enzyme-linked immunosorbent assay(ELISA) standard curve was established.This assay was sensitive and had a linear range from 0.6 to 148.0 μg/kg(R2 =0.9567),with the half maximal inhibitory concentration(IC50) and limit of detection(LOD) values of 9.4 μg/kg and 0.2 μg/kg,respectively.Of all the competitive analogues,the produced pAb exhibited a high cross-reactivity to ciprofloxacin(CIP)(87%),the main metabolite of ENR in tissues.After optimization,the matrix effects can be ignored using a 10-fold dilution in beef and 20-fold dilution in pork.The overall recoveries and coefficients of variation(CVs) were in the ranges of 86%-109% and 6.8%-13.1%,respectively.It can be concluded that the established ELISA method is suitable for simultaneous detection of ENR and CIP in animal tissues.