An Empirical Study on the Revitalization of Rural Areas Served by Banking and Financial Institutions in Jingzhou City,Hubei Province

In the implementation of the rural revitalization strategy,the banking and financial institutions in Jingzhou City,Hubei Province,under the guidance of the Jingzhou Branch of the People's Bank of China,strive to improve and develop the financial service system adapted to the characteristics of the countryside in the new period.It has innovated financial service products,improved the quality and efficiency of financial services,increased financial support,and achieved remarkable results.On the basis of the investigation,combined with the relevant written materials and statistical data collected,this paper makes an empirical study on the reality of the city's banking and financial institutions serving the revitalization of rural areas.

Activation of autophagy by Citri Reticulatae Semen extract ameliorates amyloid-beta-induced cell death and cognition deficits in Alzheimer’s disease

Amyloid-beta-induced neuronal cell death contributes to cognitive decline in Alzheimer’s disease.Citri Reticulatae Semen has diverse beneficial effects on neurodegenerative diseases,including Parkinson’s and Huntington’s diseases,however,the effect of Citri Reticulatae Semen on Alzheimer’s disease remains unelucidated.In the current study,the anti-apoptotic and autophagic roles of Citri Reticulatae Semen extract on amyloid-beta-induced apoptosis in PC12 cells were first investigated.Citri Reticulatae Semen extract protected PC12 cells from amyloid-beta-induced apoptosis by attenuating the Bax/Bcl-2 ratio via activation of autophagy.In addition,Citri Reticulatae Semen extract was confirmed to bind amyloid-beta as revealed by biolayer interferometry in vitro,and suppress amyloid-beta-induced pathology such as paralysis,in a transgenic Caenorhabditis elegans in vivo model.Moreover,genetically defective Caenorhabditis elegans further confirmed that the neuroprotective effect of Citri Reticulatae Semen extract was autophagy-dependent.Most importantly,Citri Reticulatae Semen extract was confirmed to improve cognitive impairment,neuronal injury and amyloid-beta burden in 3×Tg Alzheimer’s disease mice.As revealed by both in vitro and in vivo models,these results suggest that Citri Reticulatae Semen extract is a potential natural therapeutic agent for Alzheimer’s disease via its neuroprotective autophagic effects.

Anti-PD1 antibody and not anti-LAG-3 antibody improves the antitumor effect of photodynamic therapy for treating metastatic breast cancer

Photodynamic therapy(PDT)has limited effects in treating metastatic breast cancer.Immune checkpoints can deplete the function of immune cells;however,the expression of immune checkpoints after PDT is unclear.This study investigates whether the limited e±cacy of PDT is due to upregulated immune checkpoints and tries to combine the PDT and immune checkpoint inhibitor to observe the e±cacy.A metastatic breast cancer model was treated by PDT mediated by hematoporphyrin derivatives(HpD-PDT).The anti-tumor effect of HpD-PDT was observed,as well as CD4þT,CD8þT and calreticulin(CRT)by immunohistochemistry and immunofluorescence.Immune checkpoints on T cells were analyzed byflow cytometry after HpD-PDT.When combining PDT with immune checkpoint inhibitors,the antitumor effect and immune effect were assessed.For HpD-PDT at 100 mW/cm2 and 40,60 and 80 J/cm2,primary tumors were suppressed and CD4þT,CD8þT and CRT were elevated;however,distant tumors couldn't be inhibited and survival could not be prolonged.Immune checkpoints on T cells,especially PD1 and LAG-3 after HpD-PDT,were upregulated,which may explain the reason for the limited HpD-PDT effect.After PDT combined with anti-PD1 antibody,but not with anti-LAG-3 antibody,both the primary and distant tumors were signi-cantly inhibited and the survival time was prolonged,additionally,CD4þT,CD8þT,IFN-þCD4þT and TNF-þCD4þT cells were signi-cantly increased compared with HpD-PDT.HpD-PDT could not combat metastatic breast cancer.PD1 and LAG-3 were upregulated after HpD-PDT.Anti-PD1 antibody,but not anti-LAG-3 antibody,could augment the antitumor effect of HpD-PDT for treating metastatic breast cancer.

向量优化问题Benson真有效解的稳定性

首先利用非线性标量化技术,建立了向量优化问题Benson真有效解与一类标量优化问题解之间的等价关系.然后借助建立的等价性结果,在向量优化问题目标映射和约束条件均扰动的情况下,得到了向量优化问题Benson真有效点集和解集的抗干扰稳定性结果.该结果首次借助标量化技术,在扰动问题序列Painleve-Kuratowski收敛于目标优化问题的情况下,研究了向量优化问题Benson真有效解的抗干扰性,该结果对数值计算分析有重要的理论价值.

Ji Desheng Snake Pills Combined with Hypertonic Glucose External Application in the Treatment of Stage III and IV Pressure Injuries

Background: As a common surgical disease, pressure injury has become a long-standing problem in clinical treatment and nursing process. This research was conducted to explore the feasibility of Ji Desheng Snake Pills combined with hypertonic glucose external application in the treatment of stage III and IV pressure injuries. Methods: Patients with stage III and IV pressure injuries, who received treatment in our hospital between December 2018 and December 2019 were selected and divided into experimental group, conventional treatment group, and control group, 30 cases for each. The three groups received Ji Desheng Snake Pills combined with hypertonic glucose external application, moist dressing external application and surgical dressing change, respectively. The safety, therapeutic effect and cost benefit of the three treatment methods were compared. Results: There were no adverse reactions in the three groups of patients. The PUSH scores of the experimental group and the conventional treatment group were significantly lower than that of the control group on the 14th, 21th, and 28th days, and the result was statistically significant (p < 0.05), while there was no significant difference between the experimental group and the conventional treatment group (p > 0.05). The wound healing rates of the experimental group (70.14 ± 8.27%) and the conventional treatment group (73.99 ± 7.15%) were significantly higher than that of the control group (43.25 ± 8.53%) on the 28th day, with statistical significance (p < 0.05);there was no significant difference between the experimental group and the conventional treatment group (p > 0.05). The total treatment costs of the three groups were 569.73 ± 78.12 yuan, 1043.40 ± 135.31 yuan, and 186.47 ± 30.29 yuan. The cost of the conventional treatment group was the highest, followed by the experimental group, and the control group was the lowest. The result was statistically significant (p < 0.05). Conclusion: In the treatment of stage III and IV pressure injuries, there was no significant difference in the safety and therapeutic effect between the experimental group (Ji Desheng Snake Pills combined with hypertonic glucose external application) and the conventional treatment group (moist dressing external application), but the experimental group had better cost benefit.

Alu元件在染色质三维结构层次上的生物信息学分析

染色质在细胞核内三维高级结构包括最底层的核小体、核小体组成的"串珠"结构、螺线管纤维结构、染色质/DNA环结构(chromatin/DNA loop)、拓扑结构域(topologically associated domain, TAD)等多层次结构。其中,TAD因在不同的细胞类型中相对稳定且保守,被认为是染色质三维结构的基本单元。Alu元件是一种哺乳动物基因组中占据了较大比例的短散在重复元件,其广泛存在且种类繁多,目前关于Alu元件功能上的研究尚不透彻。本研究对Alu元件与染色质三维结构的关系进行研究,分析了Alu元件在染色质三维结构形成中的作用,并通过染色质三维结构上的距离关系对Alu元件子族的演化流程进行了探索。结果发现,Alu元件参与的染色质间相互作用在高强度的染色质相互作用中的比例随着强度增加而逐渐增高,表明Alu在染色质三维结构构建的过程中发挥了重要的作用。同时,研究还发现Alu元件在染色质上相互作用的强度与进化上的关系存在着一定的正相关性,表现在一维序列进化距离上比较接近的Alu元件在染色质的三维结构上也会彼此相互靠近。

Prevalence,clinical characteristics,risk factors,and indicators for lean Chinese adults with nonalcoholic fatty liver disease

BACKGROUND Nonalcoholic fatty liver disease(NAFLD)is one of the most common chronic diseases in the world.Nowadays,the percentage of non-obese or lean patients with NAFLD is increasing.NAFLD in non-obese populations,especially the lean subgroup with a normal waist circumference(WC),might lead to more problems than obese individuals,as these individuals may not visit clinics for NAFLD diagnosis or ignore the diagnosis of NAFLD.If the precise characteristics of these populations,especially the lean subgroup,are identified,the clinicians would be able to provide more appropriate advice and treatment to these populations.AIM To investigate the prevalence,clinical characteristics,risk factors,and possible indicators for NAFLD in lean Chinese adults with a normal WC.METHODS People without diabetes mellitus or significant alcohol consumption who underwent routine health examinations were included.Their fatty liver index(FLI),abdominal ultrasonography results,and controlled attenuation parameter were all assessed.Genotyping for single-nucleotide polymorphisms associated with NAFLD was performed in another small group consisting of biopsy-proven NAFLD subjects and healthy controls.RESULTS A total of 2715 subjects who underwent routine health examinations were included in the study.Among 810 lean participants with a normal WC,142(17.5%)fulfilled the diagnostic criteria for NAFLD.Waist-height ratio,hemoglobin,platelets,and triglycerides were significant factors associated with the presence of NAFLD in these participants.The appropriate cut-off value of the FLI score in screening for NAFLD in the lean subjects with a normal WC was 25.15,which had a 77.8%sensitivity and 75.9%specificity.There was no significant difference in the single-nucleotide polymorphisms in the SIRT1,APOC3,PNPLA3,AGTR1,and PPARGC1A genes between lean subjects with and without NAFLD(P<0.05).CONCLUSION NAFLD is not uncommon in lean Chinese adults even with a normal WC.Metabolic factors,rather than genetic factors,may play important roles in the development of NAFLD in this population.A lower cut-off value of the FLI score in screening for NAFLD should be used for lean Chinese adults with a normal WC.

Prevalence and characteristics of MAFLD in Chinese adults aged 40 years or older:A community-based study

Background: Nonalcoholic fatty liver disease(NAFLD) was recently proposed to be renamed metabolic dysfunction-associated fatty liver disease(MAFLD) with the diagnostic criteria revised. We investigated the similarities and differences in the prevalence and clinical characteristics of MAFLD and NAFLD in Chinese adults. Methods: A cross-sectional study of 9980 Chinese individuals aged 40 years or older was performed between 2011 and 2012 using randomized, stratifed cluster sampling in Shanghai, China. A detailed questionnaire and the results of abdominal ultrasonography, a standardized 2-h 75-g oral glucose tolerance test and blood biochemical examinations were collected. Results: A total of 9927 subjects were included in this study. The prevalence of MAFLD(40.3%) was significantly higher than that of NAFLD(36.9%)( P < 0.05). MAFLD was highly prevalent in type 2 diabetes mellitus(T2DM)(53.8%), impaired fasting glucose(35.7%) and impaired glucose tolerance(40.9%). High risk of advanced fbrosis based on fbrosis-4 was highly prevalent(14.7%) in lean MAFLD with T2DM. Among 9927 subjects, 3481(35.1%) fulflled the diagnostic criteria for MAFLD and NAFLD(MAFLD + NAFLD +), 521(5.2%) MAFLD + NAFLD-, and 181(1.8%) MAFLD-NAFLD +. The MAFLD + NAFLD-group had more signifcant metabolic disorders than those in the MAFLD + NAFLD + group(all P < 0.05). Among MAFLD-NAFLD + subjects, 82.9% had metabolic disorders. Conclusions: The new defnition of MAFLD may better reflect the pathogenesis related to metabolism. Future research should focus on studying the natural history, pathogenesis and treatment effectivity of the overlap and non-overlap of NAFLD and MAFLD subjects.

A validated UPLC–MS/MS method for simultaneous determination of imatinib, dasatinib and nilotinib in human plasma

A sensitive, rapid, simple and economical ultra-performance liquid chromatography-tandem mass spectrometric method （UPLC-MS/MS） was developed and validated for simultaneous determination of imatinib, dasatinib and nilotinib in human plasma using gliquidone as internal standard （IS）. Liquid-liquid extraction method with ethyl acetate was used for sample pre-treatment. The separation was performed on an Xtimate Phenyl column using isocratic mobile phase consisting of A （aqueous phase： 0.15% formic acid and 0.05% ammonium acetate） and B （organic phase： aeetonitrile） （A：B=40：60, v/v）. The flow rate was 0.25 mL/min and the total run time was 6 min. The multiple reaction monitoring （MRM） transitions, m/z 494.5-394.5 for imatinib, 488.7-401.5 for dasatinib, 530.7-289.5 for nilotinib and 528.5-403.4 for IS, were chosen to achieve high selectivity in the simultaneous analyses. The method exhibited great improvement in sensitivity and good linearity over the concentration range of 2.6-5250.0 ng/mL for imatinib, 2.0-490.0 ng/mL for dasatinib, and 2.4-4700.0 ng/mL for nilotinib. The method showed acceptable results on sensitivity, specificity, recovery, precision, accuracy and stability tests. This UPLC-MS/MS assay was successfully used for human plasma samples analysis and no significant differences were found in imatinib steady-state trough concentrations among the SLC22A5 -1889T 〉 C or SLCOIB3 699G 〉 A genotypes （P 〉 0.05）. This validated method can provide support for clinical therapeutic drug monitoring and pharmacokinetic investigations of these three tyrosine kinase inhibitors （TKIs）.

Near-net shaped Al/SiCP composites via vacuum-pressure infiltration combined with gelcasting

To solve the problem of difficult machining, the near-net shaped Al/SiCP composites with high volume fraction of SiC particles were fabricated by vacuum-pressure infiltration. The SiCP preform with a complex shape was prepared by gelcasting. Pure Al, Al4Mg, and Al4Mg2Si were used as the matrices, respectively. The results indicate that the optimal parameters of SiCP suspension in gelcasting process are pH value of 10, TMAH content of 0.5 wt.%, and solid loading of 52 vol.%. The Al matrix alloyed with Mg contributes to improving the interfacial wettability of the matrix and SiC particles, which increases the relative density of the composite. The Al matrix alloyed with Si is beneficial to inhibiting the formation of the detrimental Al4C3 phases. The Al4Mg2Si/SiCP composite exhibits high relative density of 99.2%, good thermal conductivity of 150 W·m^-1·K^-1, low coefficient of thermal expansion of 10.1×10^-6 K^-1, and excellent bending strength of 489 MPa.

Identifying the relationship between suspension parameters of underframe equipment and carbody modal frequency

As a critical component of the railway vehicle, underframe equipment has a great influence on the ride comfort of railway vehicles due to their big mass and active vibration. Therefore, study on the relationship between suspension parameters of underframe equipment and the modal frequency of carbody is extremely crucial for con trolling the ride quality of railway vehicles. In this paper, a finite element model of the carbody was developed to investigate the effects of the suspension location, the mass of the suspension equipment, and the suspension frequency on the mode of the carbody. Then, the matching relationship between the suspension parameters and the modal frequency of the carbody was studied through the transfer function. In addition, roller rig tests were performed to verify the numerical simulation model of the carbody. The results show that the suspension parameters of the underframe equipment have a great influence on the mode of the carbody, especially for the frequency of the first bending mode. To improve the frequency of carbody highfrequency bending and reduce energy transfer, equipment with a large mass should be suspended toward the middle of the carbody. The weight of the equipment strongly affects the first bending frequency and energy transfer of the carbody. The frequency of heavy suspended equipment should be sufficiently low to increase the transmissibility of high frequencies and improve the vibration characteristics of the carbody. Although the bending frequency of the carbody can be improved effec tively by increasing the suspension stiffness of thesuspension equipment, in order to reduce carbody vibration effectively, the suspension frequency of the equipment should be slightly lower than the carbody bending frequency.

Safety evaluation for railway vehicles using an improved indirect measurement method of wheel–rail forces

The wheel-rail force measurement is of great importance to the condition monitoring and safety evaluation of railway vehicles. In this paper, an improved indirect method for wheel-rail force measurement is proposed to evaluate the running safety of railway vehicles. In this method, the equilibrium equations of a suspended wheelset are derived and the wheel-rail forces are then be obtained from measured suspension and inertia forces. This indirect method avoids structural modifications to the wheelset and is applicable to the long-term operation of railway vehicles. As the wheel-rail lateral forces at two sides of the wheelset are difficult to separate, a new derailment criterion by combined use of wheelset derailment coefficient and wheel unloading ratio is proposed. To illustrate its effectiveness, the indirect method is applied to safety evaluation of rail- way vehicles in different scenarios, such as the cross wind safety of a high-speed train and the safety of a metro vehicle with hunting motions. Then, the feasibility of using this method to identify wheel-rail forces for low-floor light rail vehicles with resilient wheels is discussed. The values identified by this method is compared with that by Simpack simulation for the same low-floor vehicle, which shows a good coincidence between them in the time domain of the wheelset lateral force and the wheel-rail vertical force. In addition, use of the method to determine the high-frequency wheel-rail interaction forces reveals that it is possible to identify the high-frequency wheel-rail forces through the accelerations on the axle box.

Preparation of dual-shell Si/TiO_(2)/CFs composite and its lithium storage performance

A dual-shell Si/TiO2/CFs composite was synthesized through a simple method to deal with the intrinsic drawbacks of silicon-based anode,in terms of huge volume change,unstable SEI films,and low electronic and ionic conductivity.The inner rigid TiO2 shell alleviates the huge volume expansion of the nano silicon,and the outer resilient carbon fiber,which is porous and staggered,is beneficial to the rapid transport of electrons and ions.The as-prepared Si/TiO2/CFs composite displays a superior reversible specific capacity of 583.4 mA·h/g,high rate capability and decent cycling performance.The dual-shell encapsulation method provides a guideline for other anode materials with huge volume expansion during the cycling process.

Microstructure and properties of Al-coating on AZ31 magnesium alloy prepared by pack-cementation

Al-containing coatings were prepared on AZ31 magnesium alloy by pack-cementation technology.X-ray diffraction(XRD),backscattered electron imaging(BSEI)and energy dispersive spectroscopy(EDS)were jointly employed to characterize the phases,microstructure and composition of the coated samples.The results show that the feedstock composition has a significant impact on the phases,microstructure and thickness of the coatings.For the sample with AlCl3 powder as the activator,the coating is very thick and composed of gradient phases and structures from surface to inside,including small amount ofb-Mg2Al3,coarse eutectic-like structure ofγ-Mg17Al12+δ-Mg,and fineγ-Mg17Al12 precipitations.In contrast,for the sample with AlCl3 and pure Al composite powders as the activator,the coating is relatively thin and contains a thin Al2O3 layer and a small amount of fineγ-Mg17Al12 precipitates.For the pack-cementation aluminizing that is not protected by high-vacuum or inert gas,the addition of pure Al powders can easily introduce the Al2O3 layer into the coating to prevent active Al ions further penetrating into the magnesium matrix,resulting in the thin Al-containing coating.The microhardness and corrosion behavior of the two kinds of aluminized coatings were also studied and discussed.

Influence of equipment excitation on flexible carbody vibration of EMU

To study the vibration transmission character istics of a flexible carbody and its suspended equipment, a vertical mathematical model of highspeed electric multiple unit was established with equipment excitation considered. And the dynamic unbalance and impact turbulence excita tion from equipment were taken into account in a single stage and twostage vibration isolation system, respectively. Results show that the excitation transferred to carbody increases with suspension stiffness but decreases with the equipment mass increasing; the vibration transmission can be reduced by increasing the equipment mass or reduce the suspension stiffness. To avoid vibration resonance, the dynamic unbalance frequency of equipment should be out of the possible range of the carbody flexible modes, and a small stiffness should be applied to reduce the impact tur bulence. A small stiffness, however, would result in a large movement of the equipment which is limited by the static deflection requirement, while a great stiffness will transfer high frequency vibration. Therefore, a preferred stiffness should make the suspension frequency of equipment a bit greater than the first bending mode of carbody. Additionally, a 3D rigidflexible coupled dynamics model was built to verify the mathematical analysis, and they show good agreements. Results show that a twostage isolation could reduce the excitation transmission and make the vibration of carbody and equipment acceptable.

From NAFLD to MAFLD: Not just a change in the name

The names of many diseases have changed over time,and the criteria of successfully changing the name of a disease should make sense,be easy to say and write,get quick endorsement by professional societies,and keep the same acronym.In general,a change in the name of a disease usually represents an improve-ment in the understanding of the disease,whether on clinical set-tings and natural history or pathophysiological aspects.The suc-cessful renamed liver diseases in history include from non-A non-B hepatitis,non-B non-C hepatitis,primary biliary cirrhosis to hep-atitis C,hepatitis E and primary biliary cholangitis,respectively.Therefore,the rename of the disease that is finally used usually clearly indicates its main characteristics.

3D MoS_(2)/graphene nanoflowers as anode for advanced lithium-ion batteries

Vertical MoS2nanosheets were controllably patterned onto graphene as nanoflowers through a two-step hydrothermal method. The interconnected network and intimate contact between MoS2nanosheets and graphene by vertical channels enabled a high mechanical integrity of electrode and cycling stability. In particular, MoS2/graphene nanoflowers anode delivered an ultrahigh specific capacity of 901.8 mA·h/g after 700 stable cycles at 1000 mA/g and a corresponding capacity retention as 98.9% from the second cycle onwards.

Association of maternal obesity and gestational diabetes mellitus with overweight/obesity and fatty liver risk in offspring

BACKGROUND Childhood obesity and fatty liver are associated with adverse outcomes such as diabetes,metabolic syndrome,and cardiovascular diseases in adulthood.It is very important to identify relevant risk factors and intervene as early as possible.At present,the relationship between maternal and offspring metabolic factors is conflicting.AIM To estimate the association of maternal obesity and gestational diabetes mellitus(GDM)with overweight/obesity and fatty liver risk in offspring at 8 years of age.METHODS The prospective study included mothers who all had a 75-g oral glucose tolerance test at 24-28 wk of gestation and whose offspring completed follow-up at 8 years of age.Offspring birth weight,sex,height,weight,and body mass index(BMI)were measured and calculated.FibroScan-502 examination with an M probe(Echosens,Paris,France)was prospectively conducted in offspring aged 8 years from the Shanghai Prenatal Cohort Study.RESULTS A total of 430 mother-child pairs were included in the analysis.A total of 62(14.2%)mothers were classified as obese,and 48(11.1%)were classified as having GDM.The mean age of the offspring at follow-up was 8 years old.Thirty-seven(8.6%)offspring were overweight,14(3.3%)had obesity,and 60(14.0%)had fatty liver.The prevalence of overweight,obesity and fatty liver in offspring increased significantly across maternal BMI quartiles(all P<0.05).Among offspring of mothers with GDM,12(25.0%)were overweight,4(8.3%)were obese,and 12(25.0%)had fatty liver vs.25(6.5%),10(2.6%)and 48(12.6%),respectively,for offspring of mothers without GDM(all P<0.05).In multiple logistic regression,after adjustment for variables,the OR for fatty liver in offspring was 8.26(95%CI:2.38-28.75)for maternal obesity and GDM.CONCLUSION This study showed that maternal obesity can increase the odds of overweight/obesity and fatty liver in offspring,and GDM status also increases the odds of overweight/obesity in offspring.Weight management and glycemic control before and during pregnancy need to be highlighted in primary prevention of pediatric obesity and fatty liver.

Analysis of steering performance of differential coupling wheelset

In order to improve the curving performance of the conventional wheelset in sharp curves and resolve the steering ability problem of the independently rotating wheel in large radius curves and tangent lines, a differential cou- pling wheelset （DCW） was developed in this work. The DCW was composed of two independently rotating wheels （IRWs） coupled by a clutch-type limited slip differential. The differential contains a static pre-stress clutch, which could lock both sides of IRWs of the DCW to ensure a good steering performance in curves with large radius and tangent track. In contrast, the clutch could unlock the two IRWs of the DCW in a sharp curve to endue it with the characteristic of an IRW, so that the vehicles can go through the tight curve smoothly. To study the dynamic performance of the DCW, a multi-body dynamic model of single bogie with DCWs was established. The self-centering capability, hunting stability, and self-steering performance on a curved track were analyzed and then compared with those of the conventional wheelset and IRW. Finally, the effect of coupling parameters of the DCW on the dynamic performance was investigated.