期刊文献+
共找到138篇文章
< 1 2 7 >
每页显示 20 50 100
基于网络药理学探讨芦根治疗高血压的作用机制
1
作者 刘青 雷金 +3 位作者 刘敬 郑逸航 王岐本 李玉娟 《广东化工》 CAS 2024年第8期115-118,共4页
目的:基于网络药理学筛选芦根治疗高血压的有效成分并挖掘其潜在作用靶点及机制。方法:通过中药网络药理学库(TCMSP)获取芦根活性成分,芦根活性成分的潜在靶点从PubChem和Swiss Target Prediction数据库中获得,从OMIM、DisGeNET和GeneCa... 目的:基于网络药理学筛选芦根治疗高血压的有效成分并挖掘其潜在作用靶点及机制。方法:通过中药网络药理学库(TCMSP)获取芦根活性成分,芦根活性成分的潜在靶点从PubChem和Swiss Target Prediction数据库中获得,从OMIM、DisGeNET和GeneCards数据库中获取疾病靶点,Venny交叉共同靶点,STRING构建蛋白-蛋白相互作用PPI网络。运行DAVID进行GO和KEGG分析,在微生信平台上进行数据映射分析,探究芦根治疗高血压的潜在作用机制。结果:芦根共26个化学成分,432个作用靶点,高血压靶点共1522个,两者共同取交靶点165个。抗高血压主要活性成分包含芳樟醇、丁香酚等6种,关键靶点有AKT1、SRC、STAT3、EGFR、TNF、PTGS2、ESR1等19个。GO和KEGG获得与芦根治疗高血压有关的HIF-1信号通路和AGE-RAGE信号通路,主要影响炎症和细胞增殖等生理活动的调控。结论:芦根主要通过多靶点、多通路降血压。 展开更多
关键词 网络药理学 芦根 高血压 作用机制
下载PDF
Cr_(3)C_(2)对激光选区熔化316L合金组织及力学性能的影响
2
作者 斯松华 郑孟勤 +2 位作者 徐震霖 雷进 严敏容 《表面技术》 EI CAS CSCD 北大核心 2024年第3期191-199,共9页
目的研究添加Cr_(3)C_(2)颗粒对激光选区熔化316L合金的硬度、强度及耐磨性能的影响。方法采用激光选区熔化(Selective Laser Melting,SLM)技术制备316L合金及10%(质量分数)Cr_(3)C_(2)颗粒增强316L合金(Cr_(3)C_(2)/316L),通过X射线衍... 目的研究添加Cr_(3)C_(2)颗粒对激光选区熔化316L合金的硬度、强度及耐磨性能的影响。方法采用激光选区熔化(Selective Laser Melting,SLM)技术制备316L合金及10%(质量分数)Cr_(3)C_(2)颗粒增强316L合金(Cr_(3)C_(2)/316L),通过X射线衍射仪(XRD)、光学显微镜(OM)、扫描电子显微镜(SEM)、透射电镜(TEM)、维氏显微硬度计、双立柱电子万能试验机和摩擦磨损试验机分别对2组合金试样的组织结构、硬度、拉伸性能以及耐磨性能进行测试与分析。结果316L合金主要由γ-Fe相组成,Cr_(3)C_(2)/316L合金中除γ-Fe相外,还存在Cr_(23)C_(6)和Cr_(3)C_(2)相。316L和Cr_(3)C_(2)/316L合金的显微组织均由柱状晶和等轴晶组成,Cr_(3)C_(2)/316L的组织中等轴晶比例增多,且组织产生了细化。Cr_(3)C_(2)/316L合金的显微硬度为327HV0.1,相比316L合金(265HV0.1)增加了23%。Cr_(3)C_(2)/316L合金的屈服强度和抗拉强度分别为687 MPa和1029 MPa,较316L合金均提高了约50%。Cr_(3)C_(2)/316L合金的磨损率相比316L合金减小了50%。结论在SLM过程中,由于添加的Cr_(3)C_(2)颗粒在激光选区熔化316L合金过程中所产生的非自发形核和提高过冷度的作用,促使了316L合金组织发生明显细化和等轴化。添加的Cr_(3)C_(2)颗粒所产生的细晶强化、沉淀强化和固溶强化作用,使316L合金的硬度、强度和耐磨性都得到有效提升。 展开更多
关键词 激光选区熔化 316L Cr_(3)C_(2) 显微组织 拉伸性能 耐磨性能
下载PDF
沙棘枝杆力学特性试验研究 被引量:2
3
作者 任子超 雷金 +5 位作者 彭霞 秦新燕 王卫兵 王军扬 翟志远 王炳鹏 《农机化研究》 北大核心 2024年第7期146-151,共6页
为获取沙棘枝杆的力学参数,支撑沙棘收获设备的开发,以新疆大果沙棘枝杆为对象,采用万能试验机对其剪切、弯曲和压缩的力学性能进行了测定,并在此基础上评估了直径和含水率对沙棘枝杆力学性能的影响。力学试验研究表明:沙棘枝杆的抗弯... 为获取沙棘枝杆的力学参数,支撑沙棘收获设备的开发,以新疆大果沙棘枝杆为对象,采用万能试验机对其剪切、弯曲和压缩的力学性能进行了测定,并在此基础上评估了直径和含水率对沙棘枝杆力学性能的影响。力学试验研究表明:沙棘枝杆的抗弯强度随着直径的增大而增大,直径为20mm时最大,为78.14MPa,直径为10mm时最小,为67.14MPa;抗剪强度会随着直径的增大先略微减小再增大,直径为20mm时最大,为45.46MPa,直径为12.5mm时最小,为30.90MPa;抗压强度会随着直径的增大而增大,直径为20mm时最大,为30.76MPa,直径为10mm时最小,为22.79MPa;弯曲试验和压缩试验中极限承载力随着含水率的上升而下降,压缩试验的趋势更为显著;剪切试验的极限承载力开始时随着含水率的上升而上升,在30%时到达最大值,之后随着含水率的上升而下降。研究结果可为沙棘枝杆的收获、破碎和加工设备的设计提供参数依据。 展开更多
关键词 沙棘枝杆 力学特性 含水率 直径 承载力
下载PDF
不同材料用于额颞部大面积颅骨缺损修复的临床疗效分析
4
作者 廖晋 才智 +5 位作者 李宇 雷晋 赵恺 牛洪泉 舒凯 雷霆 《临床外科杂志》 2024年第8期811-813,共3页
目的探究钛网和聚醚醚酮用于额颞部大面积颅骨缺损修复的临床疗效。方法2018年4月~2022年6月因额颞部大面积颅骨缺损行颅骨修复的病人150例,按修复材料不同分为钛网组(96例)和聚醚醚酮组(54例),比较两组术后手术部位感染、出血、皮下积... 目的探究钛网和聚醚醚酮用于额颞部大面积颅骨缺损修复的临床疗效。方法2018年4月~2022年6月因额颞部大面积颅骨缺损行颅骨修复的病人150例,按修复材料不同分为钛网组(96例)和聚醚醚酮组(54例),比较两组术后手术部位感染、出血、皮下积液、癫痫发作、植入物断裂或外露等。结果聚醚醚酮组96.3%病人修补材料需置入颞肌下,高于钛网组的78.1%,两组比较差异有统计学意义(P<0.05)。两组术后并发症包括感染、出血、术后新发癫痫、植入物断裂或外漏等情况比较差异均无统计学意义(P>0.05),但聚醚醚酮组病人术后皮下积液发生率高于钛网组(14.8%VS 4.2%),差异有统计学意义(P<0.05)。结论钛网和聚醚醚酮材料均可用于额颞部大面积颅骨缺损修复手术,聚醚醚酮材料在颅骨修复术中易合并术区皮下积液。 展开更多
关键词 大面积颅骨缺损 颅骨修复 钛网 聚醚醚酮 皮下积液
下载PDF
Tumor necrosis factor-stimulated gene-6 ameliorates early brain injury after subarachnoid hemorrhage by suppressing NLRC4 inflammasome-mediated astrocyte pyroptosis 被引量:2
5
作者 Mingxiang Ding lei jin +4 位作者 Boyang Wei Wenping Cheng Wenchao Liu Xifeng Li Chuanzhi Duan 《Neural Regeneration Research》 SCIE CAS CSCD 2024年第5期1064-1071,共8页
Subarachnoid hemorrhage is associated with high morbidity and mortality and lacks effective treatment.Pyroptosis is a crucial mechanism underlying early brain injury after subarachnoid hemorrhage.Previous studies have... Subarachnoid hemorrhage is associated with high morbidity and mortality and lacks effective treatment.Pyroptosis is a crucial mechanism underlying early brain injury after subarachnoid hemorrhage.Previous studies have confirmed that tumor necrosis factor-stimulated gene-6(TSG-6)can exert a neuroprotective effect by suppressing oxidative stress and apoptosis.However,no study to date has explored whether TSG-6 can alleviate pyroptosis in early brain injury after subarachnoid hemorrhage.In this study,a C57BL/6J mouse model of subarachnoid hemorrhage was established using the endovascular perforation method.Our results indicated that TSG-6 expression was predominantly detected in astrocytes,along with NLRC4 and gasdermin-D(GSDMD).The expression of NLRC4,GSDMD and its N-terminal domain(GSDMD-N),and cleaved caspase-1 was significantly enhanced after subarachnoid hemorrhage and accompanied by brain edema and neurological impairment.To explore how TSG-6 affects pyroptosis during early brain injury after subarachnoid hemorrhage,recombinant human TSG-6 or a siRNA targeting TSG-6 was injected into the cerebral ventricles.Exogenous TSG-6 administration downregulated the expression of NLRC4 and pyroptosis-associated proteins and alleviated brain edema and neurological deficits.Moreover,TSG-6 knockdown further increased the expression of NLRC4,which was accompanied by more severe astrocyte pyroptosis.In summary,our study revealed that TSG-6 provides neuroprotection against early brain injury after subarachnoid hemorrhage by suppressing NLRC4 inflammasome activation-induced astrocyte pyroptosis. 展开更多
关键词 ASTROCYTE early brain injury INFLAMMASOME NLRC4 PYROPTOSIS subarachnoid hemorrhage tumor necrosis factor-stimulated gene-6(TSG-6)
下载PDF
Tunable artificial plasmonic nanolaser with wide spectrum emission operating at room temperature
6
作者 周鹏 郭佳琦 +7 位作者 梁琨 金磊 梁熊玉 李俊强 邓绪彦 秦建宇 张家森 于丽 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第5期466-471,共6页
With the rapid development of information and communication technology,a key objective in the field of optoelectronic integrated devices is to reduce the nano-laser size and energy consumption.Photonics nanolasers are... With the rapid development of information and communication technology,a key objective in the field of optoelectronic integrated devices is to reduce the nano-laser size and energy consumption.Photonics nanolasers are unable to exceed the diffraction limit and typically exhibit low modulation rates of several GHz.In contrast,plasmonic nanolaser utilizes highly confined surface plasmon polariton(SPP)mode that can exceed diffraction limit and their strong Purcell effect can accelerate the modulation rates to several THz.Herein,we propose a parametrically tunable artificial plasmonic nanolasers based on metal–insulator–semiconductor–insulator–metal(MISIM)structure,which demonstrates its ability to compress the mode field volume toλ/14.As the pump power increases,the proposed artificial plasmonic nanolaser exhibits 20-nm-wide output spectrum.Additionally,we investigate the effects of various cavity parameters on the nanolaser’s output threshold,offering potentials for realizing low-threshold artificial plasmonic nanolasers.Moreover,we observe a blue shift in the center wavelength of the nanolaser output with thinner gain layer thickness,predominantly attributed to the increased exciton–photon coupling strength.Our work brings inspiration to several areas,including spaser-based interconnects,nano-LEDs,spontaneous emission control,miniaturization of photon condensates,eigenmode engineering of plasmonic nanolasers,and optimal design driven by artificial intelligence(AI). 展开更多
关键词 surface plasmon polaritons nanolaser ULTRAFAST MISIM
下载PDF
矩阵式远红外感温传感器温度补偿及校准方法
7
作者 刘文昉 雷瑾 吴铎 《红外技术》 CSCD 北大核心 2024年第9期1092-1098,共7页
针对远红外矩阵式温度传感器提出一种可显著提高温度测量精度的补偿及校准方法,该方法建立了基于矩阵式红外阵列温度检测的最值补偿模型,并提出一种距离归一化校准方法,利用该温度补偿及校准方法可对矩阵式红外温度传感器在任意角度,任... 针对远红外矩阵式温度传感器提出一种可显著提高温度测量精度的补偿及校准方法,该方法建立了基于矩阵式红外阵列温度检测的最值补偿模型,并提出一种距离归一化校准方法,利用该温度补偿及校准方法可对矩阵式红外温度传感器在任意角度,任意距离下的测量误差进行补偿和校准。实验结果表明,该方法能够减少测量角度及距离对温度测量的影响,显著提高矩阵式红外温度传感器的测量精度,并具备实用价值。 展开更多
关键词 红外矩阵式感温传感器 角度补偿 距离补偿 距离校准 距离归一化
下载PDF
双动刀沙棘枝条切割参数分析与试验 被引量:4
8
作者 王炳棚 雷金 +4 位作者 秦新燕 王卫兵 王军扬 任子超 翟志远 《农业工程学报》 EI CAS CSCD 北大核心 2023年第10期26-36,共11页
为探明沙棘枝条最优切割参数,解决针对国内沙棘专用机械收获装备空缺问题,该研究设计了双动刀沙棘枝条切割试验台并开展沙棘枝条切割试验,确定了切割装置关键结构参数,基于LabVIEW开发了沙棘枝条切割特性测控系统和数据采集软件。通过... 为探明沙棘枝条最优切割参数,解决针对国内沙棘专用机械收获装备空缺问题,该研究设计了双动刀沙棘枝条切割试验台并开展沙棘枝条切割试验,确定了切割装置关键结构参数,基于LabVIEW开发了沙棘枝条切割特性测控系统和数据采集软件。通过单因素试验探究平均切割速度、刀具滑切角、刀刃高度和动刀组数对单位直径峰值力及单位面积切割功耗的影响;采用Box-Behnken多因素试验设计方法,以平均切割速度、枝条喂入速度和刀具滑切角为试验因素,以单位直径峰值力和单位面积切割功耗为评价指标建立回归模型。试验结果表明,评价指标随着平均切割速度、刀具滑切角和刀刃高度的增大而减小,在双动刀时比单动刀时数值更小。通过响应曲面法优化回归模型,确定最优切割参数组合为平均切割速度0.45 m/s、枝条喂入速度0.64 m/s、刀具滑切角9.4°,该组合下单位直径峰值力为53.33 N/mm,单位面积切割功耗为69.87 kJ/m^(2),模型误差小于5%,切割参数优化结果准确。研究结果可为后续沙棘枝条收获装备的研发提供数据支撑。 展开更多
关键词 机械化 试验 切割 沙棘枝条 往复式 双动刀
下载PDF
多次微波消融对原发性肝癌患者术后肝功能的影响 被引量:2
9
作者 张天澜 路营 +2 位作者 雷进 董政 千年松 《解放军医学院学报》 CAS 北大核心 2023年第7期733-738,799,共7页
背景 微波消融(microwave ablation,MWA)是原发性肝癌的主要治疗手段之一,但对于复发患者,多次MWA是否会增加术后肝功能恶化的风险,目前尚不明确。目的 探讨原发性肝癌患者行多次MWA对肝功能的影响。方法 回顾性分析2016年6月-2021年7... 背景 微波消融(microwave ablation,MWA)是原发性肝癌的主要治疗手段之一,但对于复发患者,多次MWA是否会增加术后肝功能恶化的风险,目前尚不明确。目的 探讨原发性肝癌患者行多次MWA对肝功能的影响。方法 回顾性分析2016年6月-2021年7月因原发性肝癌在解放军总医院第五医学中心行经皮微波消融的患者,根据MWA总次数分为单次消融组和多次消融组。收集患者消融前、消融后24 h及消融后5~7 d的肝功能指标和术后并发症。应用白蛋白-胆红素分级(albumin-bilirubin,ALBI)评估患者术后肝功能。比较两组术后肝功能和并发症发生情况。结果 共纳入223例原发性肝癌行经皮微波消融治疗患者,男性183例,女性40例,平均年龄(58.99±9.17)岁。单次消融组142例,多次消融组81例。两组一般资料和临床特点的差异无统计学意义(P>0.05)。天冬氨酸氨基转移酶(aspartate aminotransferase,AST)在术前、术后5~7 d的组间差异无统计学意义,但术后24 h多次消融组显著低于单次消融组[Md(IQR):247(148~370) U/L vs287(205~406) U/L,P=0.037]。两组间术前、术后24 h及术后5~7 d的凝血酶原活动度(prothrombin activity,PA)、白蛋白(albumin,ALB)、总胆红素(total bilirubin,TBIL)、丙氨酸氨基转移酶(alanine aminotransferase,ALT)、胆碱酯酶(cholinesterase,ChE)指标差异无统计学意义(P>0.05)。消融术后24 h,多次消融组ALB及两组ChE均较术前轻微下降,差异无统计学意义(P>0.05)。两组其余各肝功能指标不同时间点比较,术后24 h及术后5~7 d均较术前略差(P<0.01)。单次消融组与多次消融组MWA术后ALBI分级恶化的比例相似(P>0.05)。MWA术后发热、肝区疼痛及严重并发症(严重感染、胸腔积液和腹水、术后出血、肝衰竭)的发生率,两组差异无统计学意义(P>0.05)。结论 MWA是一项安全有效、可重复性强的治疗手段,多次MWA不会增加原发性肝癌患者术后肝功能不全及并发症的发生率。 展开更多
关键词 肝细胞癌 微波消融 肝功能 白蛋白-胆红素分级 术后并发症
下载PDF
The Solar Upper Transition Region Imager(SUTRI)Onboard the SATech-01 Satellite 被引量:9
10
作者 Xianyong Bai Hui Tian +56 位作者 Yuanyong Deng Zhanshan Wang Jianfeng Yang Xiaofeng Zhang Yonghe Zhang Runze Qi Nange Wang Yang Gao Jun Yu Chunling He Zhengxiang Shen Lun Shen Song Guo Zhenyong Hou Kaifan Ji Xingzi Bi Wei Duan Xiao Yang Jiaben Lin Ziyao Hu Qian Song Zihao Yang Yajie Chen Weidong Qiao Wei Ge Fu Li lei jin Jiawei He Xiaobo Chen Xiaocheng Zhu Junwang He Qi Shi Liu Liu jinsong Li Dongxiao Xu Rui Liu Taijie Li Zhenggong Feng Yamin Wang Chengcheng Fan Shuo Liu Sifan Guo Zheng Sun Yuchuan Wu Haiyu Li Qi Yang Yuyang Ye Weichen Gu Jiali Wu Zhe Zhang Yue Yu Zeyi Ye Pengfeng Sheng Yifan Wang Wenbin Li Qiushi Huang Zhong Zhang 《Research in Astronomy and Astrophysics》 SCIE CAS CSCD 2023年第6期153-171,共19页
The Solar Upper Transition Region Imager(SUTRI)onboard the Space Advanced Technology demonstration satellite(SATech-01),which was launched to a Sun-synchronous orbit at a height of~500 km in 2022 July,aims to test the... The Solar Upper Transition Region Imager(SUTRI)onboard the Space Advanced Technology demonstration satellite(SATech-01),which was launched to a Sun-synchronous orbit at a height of~500 km in 2022 July,aims to test the on-orbit performance of our newly developed Sc/Si multi-layer reflecting mirror and the 2k×2k EUV CMOS imaging camera and to take full-disk solar images at the Ne VII 46.5 nm spectral line with a filter width of~3 nm.SUTRI employs a Ritchey-Chrétien optical system with an aperture of 18 cm.The on-orbit observations show that SUTRI images have a field of view of~416×416 and a moderate spatial resolution of~8″without an image stabilization system.The normal cadence of SUTRI images is 30 s and the solar observation time is about16 hr each day because the earth eclipse time accounts for about 1/3 of SATech-01's orbit period.Approximately15 GB data is acquired each day and made available online after processing.SUTRI images are valuable as the Ne VII 46.5 nm line is formed at a temperature regime of~0.5 MK in the solar atmosphere,which has rarely been sampled by existing solar imagers.SUTRI observations will establish connections between structures in the lower solar atmosphere and corona,and advance our understanding of various types of solar activity such as flares,filament eruptions,coronal jets and coronal mass ejections. 展开更多
关键词 Sun:transition region Sun:UV radiation Sun:activity space vehicles:instruments
下载PDF
冻藏后沙棘果实的分离力与相关物理特性参数分析
11
作者 林鑫章 雷金 +4 位作者 任子超 张杰 梁炳钦 王炳鹏 王卫兵 《新疆农业科学》 CAS CSCD 北大核心 2023年第10期2479-2485,共7页
【目的】研究不同冻藏温度下沙棘果实的分离力与不同物理参数,为研制沙棘果采收和加工机械提供依据。【方法】以深秋红沙棘果为材料,运用推拉力计、质构仪等测定不同冻藏温度沙棘果的分离力、果皮硬度等物理参数,分析显著差异性和相关... 【目的】研究不同冻藏温度下沙棘果实的分离力与不同物理参数,为研制沙棘果采收和加工机械提供依据。【方法】以深秋红沙棘果为材料,运用推拉力计、质构仪等测定不同冻藏温度沙棘果的分离力、果皮硬度等物理参数,分析显著差异性和相关性。【结果】不同冻藏温度沙棘果果皮硬度曲线不同,果皮破裂时间不同以及果皮刺破后果肉受力差异较大。随着树龄增加,沙棘果实分离力、果柄直径、果实横纵径、果实质量都显著增加;随着冻藏温度降低,沙棘果皮硬度显著增加,果实跌落硬度显著减小。沙棘果实分离力与果柄直径、果实横纵径、果实质量呈显著正相关(P<0.01);果实质量与果实分离力、果柄直径、果实横纵径呈显著正相关(P<0.01);果皮硬度与果实跌落硬度呈显著负相关(P<0.01)。【结论】树龄大冻藏温度低的沙棘果较适宜脱果采收,果实分离力、果实质量、果皮硬度分别与其他参数相关性高。 展开更多
关键词 沙棘果 冻藏 物理特性参数 分离力 果皮硬度
下载PDF
一种改良的原代神经元牵张损伤模型的构建与评估
12
作者 雷晋 张复驰 +5 位作者 李宇 万学焱 赵恺 牛洪泉 舒凯 雷霆 《中国临床神经外科杂志》 2023年第9期581-584,共4页
目的探讨原代神经元牵张损伤模型的改良方法及其可行性。方法提取出生24 h内SD乳鼠皮层组织进行原代神经元培养,利用智能真空负压机和弹力膜培养板对经典的神经元牵张损伤模型(CICⅡ模型)进行改良,根据弹力膜形变距离将细胞分为对照组(... 目的探讨原代神经元牵张损伤模型的改良方法及其可行性。方法提取出生24 h内SD乳鼠皮层组织进行原代神经元培养,利用智能真空负压机和弹力膜培养板对经典的神经元牵张损伤模型(CICⅡ模型)进行改良,根据弹力膜形变距离将细胞分为对照组(只种植细胞,不做牵张损伤)、轻度损伤组(形变距离7 mm)、中度损伤组(形变距离10 mm)和重度损伤组(形变距离13 mm)。显微镜观察细胞形态变化,NeuN免疫荧光染色鉴定细胞纯度;免疫印迹法检测凋亡相关蛋白(cleaved Caspase-3、Bcl-2)表达,比色法测定培养液乳酸脱氢酶(LDH)活性。结果原代神经元培养5 d,显微镜下观察发现细胞生长良好,NeuN染色显示神经元纯度在95%以上。中度损伤后即刻,显微镜下发现神经元轴索断裂,部分细胞呈空泡样变。与对照组相比,损伤组cleaved Caspase-3表达水平、细胞培养液LDH水平均明显上升(P<0.05),而Bcl-2表达水平明显下降(P<0.05)。损伤组cleaved Caspase-3表达水平、细胞培养液LDH水平与伤程度呈明显正相关(P<0.05),而Bcl-2表达水平与伤程度呈明显负相关(P<0.05)。结论新生大鼠皮层体外培养所获原代神经元纯化率较高。本研究改良模型可模拟神经元损伤,使用方便、可重复性好,适合颅脑损伤和细胞力学研究。 展开更多
关键词 颅脑损伤 原代神经元 牵张损伤模型 方法改良 可行性 SD乳鼠
下载PDF
飞走巡线机器人多模式切换混杂控制方法
13
作者 秦新燕 李惠东 +6 位作者 冯天明 雷金 李博 李兆钧 张杰 王艳琦 贾文兴 《智能系统学报》 CSCD 北大核心 2023年第6期1243-1258,共16页
电力线所处环境恶劣,工况复杂,具柔索特性,对巡线机器人的稳定性和可靠性提出较大挑战,因此以飞走巡线机器人(flying-walking power line inspection robot,FPLIR)为研究对象,提出了一种多模式切换混杂控制方法。在FPLIR巡检工作原理基... 电力线所处环境恶劣,工况复杂,具柔索特性,对巡线机器人的稳定性和可靠性提出较大挑战,因此以飞走巡线机器人(flying-walking power line inspection robot,FPLIR)为研究对象,提出了一种多模式切换混杂控制方法。在FPLIR巡检工作原理基础上,建立4种控制模式的混杂自动机模型和相互切换的监测器模型;利用Lyapunov函数法和力角稳定性判据(force-angle stability margin,FASM)法分析FPLIR多模式切换和力学特性的稳定性;基于各模式的控制目标,提出了对应的控制策略,尤其结合FPLIR的结构和工况特点,设计变论域模糊控制器,提高FPLIR线上行走的稳定性,设计模型预测控制器,提高FPLIR落线的安全性。最后通过仿真和实验验证了多模式切换混杂控制方法的有效性和可行性,提升了FPLIR在复杂电力线环境下的适应性,为未来机器人智能巡检提供理论参考。 展开更多
关键词 电力线 飞走巡线机器人 多模式切换 混杂控制 自动机 监测器 变论域模糊控制 模型预测
下载PDF
Pregnancy Outcomes for Day 5 Versus Day 6 Single Frozen-thawed Blastocyst Transfer with Different Qualities of Embryos: A Large Matched-cohort Study
14
作者 Qiong YU Hui HE +2 位作者 Xin-ling REN Shi-fu HU lei jin 《Current Medical Science》 SCIE CAS 2023年第2期297-303,共7页
Objective This study aimed to determine whether the day of blastocyst expansion affects pregnancy outcomes in frozen-thawed blastocyst transfer(FBT)cycles.Methods A retrospective match-cohort study was conducted.Patie... Objective This study aimed to determine whether the day of blastocyst expansion affects pregnancy outcomes in frozen-thawed blastocyst transfer(FBT)cycles.Methods A retrospective match-cohort study was conducted.Patients who underwent blastocyst transfer in frozen-thawed cycles at day 5 or 6 were matched for potential confounding factors.A total of 2207 matched pairs of FBT cycles were included from January 2016 to December 2019 in our Reproductive Medicine Center.Results The clinical pregnancy rate(CPR)and live birth rate(LBR)were significantly increased in day 5 blastocyst transfers when compared to day 6 blastocyst transfers,in terms of the same embryo quality.For FBT cycles with good-quality embryo,the CPR at day 5 and 6 was 61.30%and 57.56%,respectively(P=0.045),and the LBR was 44.79%and 36.16%,respectively(P<0.001).For FBT cycles with poor-quality embryo,the CPR at day 5 and 6 was 48.61%and 40.89%,respectively(P=0.006),and the LBR was 31.71%and 25.74%,respectively(P=0.019).The CPR for FBT cycles with good-quality embryo was statistically higher at day 6 than that at day 5 with poor-quality embryo transferred(57.56%vs.48.61%,P=0.001).Maternal age,anti-Müllerian hormone(AMH),endometrial thickness,embryo quality,and the day of blastocyst expansion were independently correlated with the CPR and LBR.The FBT cycles at day 5 had significantly higher CPR(adjusted odds ratio[OR]=1.246,95%confidence intervals[CI]:1.097–1.415,P=0.001)and LBR(adjusted OR=1.435,95%CI:1.258–1.637,P<0.001)than those at day 6.Conclusion The embryo quality is the primary indicator for FBT cycles.Day 5 blastocysts should be preferred when the quality of embryo at day 5 is the same as that at day 6. 展开更多
关键词 frozen-thawed blastocyst transfer day 5 versus day 6 embryo quality clinical pregnancy rate live birth rate
下载PDF
Coercivity enhancement of sintered Nd–Fe–B magnets by grain boundary diffusion with Pr_(80-x)Al_(x)Cu_(20)alloys
15
作者 金哲欢 金磊 +10 位作者 丁广飞 郭帅 郑波 樊思宁 王志翔 范晓东 朱金豪 陈仁杰 闫阿儒 潘晶 刘新才 《Chinese Physics B》 SCIE EI CAS CSCD 2023年第1期516-521,共6页
A grain boundary diffusion(GBD)process with Pr_(80-x)Al_(x)Cu_(20)(x=0,10,15,20)low melting point alloys was applied to commercial 42M sintered Nd–Fe–B magnets.The best coercivity enhancement of a diffused magnet wa... A grain boundary diffusion(GBD)process with Pr_(80-x)Al_(x)Cu_(20)(x=0,10,15,20)low melting point alloys was applied to commercial 42M sintered Nd–Fe–B magnets.The best coercivity enhancement of a diffused magnet was for the Pr_(65)Al_(15)Cu_(20)GBD magnet,from 16.38 kOe to 22.38 kOe.Microstructural investigations indicated that increase in the Al content in the diffusion source can form a continuous grain boundary(GB)phase,optimizing the microstructure to enhance the coercivity.The coercivity enhancement is mainly due to the formation of a continuous GB phase to separate the main phase grains.Exchange decoupling between the adjacent main phase grains is enhanced after the GBD process.Meanwhile,the introduction of Al can effectively promote the infiltration of Pr into the magnet,which increases the diffusion rate of rare-earth elements within a certain range.This work provides a feasible method to enhance coercivity and reduce the use of rare-earth resources by partial replacement of rare-earth elements with non-rare-earth elements in the diffusion source. 展开更多
关键词 Nd–Fe–B grain boundary diffusion coercivity enhancement grain boundary phase
下载PDF
Two-dimensional dumbbell silicene as a promising anode material for(Li/Na/K)-ion batteries
16
作者 刘曼 程子爽 +7 位作者 张小明 李叶枫 靳蕾 刘丛 代学芳 刘影 王啸天 刘国栋 《Chinese Physics B》 SCIE EI CAS CSCD 2023年第9期28-34,共7页
Rechargeable ion batteries require anode materials with excellent performance,presenting a key challenge for researchers.This paper explores the potential of using two-dimensional dumbbell silicene as an anode materia... Rechargeable ion batteries require anode materials with excellent performance,presenting a key challenge for researchers.This paper explores the potential of using two-dimensional dumbbell silicene as an anode material for alkali metal ion batteries through density functional theory(DFT)calculations.Our findings demonstrate that alkali metal ions have negative adsorption energies on dumbbell silicene,and the energy barriers for Li/Na/K ion diffusion are as low as0.032 e V/0.055 e V/0.21 e V,indicating that metal ions can easily diffuse across the entire surface of dumbbell silicene.Additionally,the average open circuit voltages of dumbbell silicene as anode for Li-ion,Na-ion,and K-ion batteries are 0.42 V,0.41 V,and 0.60 V,respectively,with corresponding storage capacities of 716 m Ah/g,622 m Ah/g,and 716 m Ah/g.These results suggest that dumbbell silicene is an ideal anode material for Li-ion,Na-ion,and K-ion batteries,with high capacity,low open circuit voltage,and high ion diffusion kinetics.Moreover,our calculations show that the theoretical capacities obtained using DFT-D2 are higher than those obtained using DFT-D3,providing a valuable reference for subsequent theoretical calculations. 展开更多
关键词 dumbbell silicene density functional theory anode materials ion batteries
下载PDF
Effect of TbF_(3)diffusion on the demagnetization behavior and domain evolution of sintered Nd-Fe-B magnets by electrophoretic deposition
17
作者 曹学静 郭帅 +5 位作者 谢宇恒 金磊 丁广飞 郑波 陈仁杰 闫阿儒 《Chinese Physics B》 SCIE EI CAS CSCD 2023年第9期481-485,共5页
We studied the magnetic properties and domain evolution of annealed and TbF3-diffused sintered Nd-Fe-B magnets using the electrophoretic deposition method.After TbF_(3)diffusion,the coercivity increased significantly ... We studied the magnetic properties and domain evolution of annealed and TbF3-diffused sintered Nd-Fe-B magnets using the electrophoretic deposition method.After TbF_(3)diffusion,the coercivity increased significantly by 9.9 kOe and microstructural analysis suggested that Tb favored the formation of the(Nd,Tb)_(2)Fe_(14)B shell phase in the outer region of the matrix grains.The first magnetization reversal and the dynamic successive domain propagation process were detected with a magneto-optical Kerr microscope.For the TbF_(3)-diffused magnet,the magnetization reversal appeared at a larger applied field and the degree of simultaneous magnetization reversal decreased compared with an annealed magnet.During demagnetization after full magnetization,the occurrence of domain wall motion(DWM)in the reproduced multi-domain regions was observed by the step method.The maximum polarization change resulting from the reproduced DWM was inversely related to the coercivity.The increased coercivity for the diffused magnet was mainly attributed to the more difficult nucleation of the magnetic reversed region owing to the improved magneto-crystalline anisotropy field as a result of Tb diffusion. 展开更多
关键词 sintered Nd-Fe-B magnet electrophoretic deposition grain boundary diffusion domain evolution
下载PDF
Controlling oxygen content in electro-slag remelting steel by optimizing slag-steel reaction process
18
作者 Dian-dong Sun Yong Wang +3 位作者 lei jin Zong-xu Pang Jian Huang Jian-ping Zhang 《China Foundry》 SCIE EI CAS CSCD 2023年第6期503-510,共8页
The thermodynamic equilibrium of deoxidation reactions between molten slag and steel was calculated using a slag-steel coupling thermodynamic model and the mass conservation model based on the ion-molecular coexistenc... The thermodynamic equilibrium of deoxidation reactions between molten slag and steel was calculated using a slag-steel coupling thermodynamic model and the mass conservation model based on the ion-molecular coexistence theory.The study focused on the effects of slag composition and deoxidizer type on the oxygen content of low alloy steel during the electroslag remelting(ESR)process.The measured and predicted values of the oxygen content in remelted ingots,and the contents of FeO and MnO in slags were compared and analyzed.Results show that the measured content of total oxygen has a certain correlation with the trend of dissolved oxygen predicted by the model when using Ca-Si alloys as deoxidizer,but it is not correlated with the trend of dissolved oxygen predicted by the model when using Al as deoxidizer.The deoxidation mechanisms of Ca-Si and Al are different.Ca-Si alloy directly reacts with FeO and MnO in slag to reduce the oxygen potential of slag,hence it can inhibit the transfer of oxygen from the slag to molten steel.While,when Al deoxidizer is used,the oxygen content in steel is mainly reduced through floating up the alumina inclusions.Compared to Al,utilizing Ca-Si alloy as a deoxidizer is more effective in reducing the oxygen content and the amount of inclusions in ESR ingot. 展开更多
关键词 ion-molecular coexistence theory slag-steel reaction DEOXIDATION electro-slag remelting
下载PDF
Carcinosarcoma of common bile duct:A case report
19
作者 Yao Yao Hong-Gang Xiang +2 位作者 lei jin Ming Xu Shu-Yan Mao 《World Journal of Gastrointestinal Oncology》 SCIE 2023年第3期562-570,共9页
BACKGROUND Carcinosarcomas of the common bile duct(CBD)are an extremely rare finding in the clinical setting.Based on a review of 12 literatures,3 cases had the imaging features of ossification.Carcinosarcomas are pro... BACKGROUND Carcinosarcomas of the common bile duct(CBD)are an extremely rare finding in the clinical setting.Based on a review of 12 literatures,3 cases had the imaging features of ossification.Carcinosarcomas are prone to distant metastasis,as they possess clinical features of both carcinoma and sarcoma,and generally have with a poor prognosis.Due to the small number of cases reported,clinical experience in the diagnosis and treatment of the disease is lacking.CASE SUMMARY The patient was a 75-year-old woman who had experienced recurrent chills with nausea and vomiting for 3 mo.Computed tomography,magnetic resonance imaging,endoscopic ultrasonography and endoscopic retrograde cholangiopancreatography led to the diagnosis of malignant tumor of the CBD.The patient ultimately underwent cholecystectomy,CBD resection,and choledochojejunostomy.Postoperative pathological examination revealed carcinosarcoma of the CBD,and the latest follow-up showed that the patient is recovering well.Based on previous case reports,some carcinosarcoma has ossification characteristics in imaging.If it is misdiagnosed as biliary calculi,the use of laser lithotripsy in surgery may lead to tumor diffusion.Choledochoscopy and narrow band staining of mucosa are very important for diagnosis.CONCLUSION We herein present a rare case of carcinosarcomas of the CBD,we found the tumours may have imaging features of polypoid growth and ossification only when the sarcomal components are bone differentiation,while show soft tissue shadow when non bone differentiation.Confirmation of diagnosis depends greatly upon postoperative pathological examination and the adjuvant treatment has not been established,which leads to the poor prognosis. 展开更多
关键词 CARCINOSARCOMA Sarcocarcinoma Sarcomatoid carcinoma Extrahepatic bile duct tumor Common bile duct tumor Case report
下载PDF
高压空气管网系统阀内流体计算及泄漏分析 被引量:5
20
作者 谢江辉 尚进 +3 位作者 张德满 羊慧 雷金 李辉 《流体机械》 CSCD 北大核心 2018年第9期44-50,共7页
对高压空气管网系统中的电磁阀内部空气流动及垫片处的泄漏进行研究,首先对管道中的电磁阀进行三维建模,运用流体力学FLUENT软件的动网格技术,计算出不同的开关阀工况下在管道内部形成的压力脉冲,并将管道内部形成的最大压力脉冲,结合... 对高压空气管网系统中的电磁阀内部空气流动及垫片处的泄漏进行研究,首先对管道中的电磁阀进行三维建模,运用流体力学FLUENT软件的动网格技术,计算出不同的开关阀工况下在管道内部形成的压力脉冲,并将管道内部形成的最大压力脉冲,结合密封件泄漏的理论计算验证方法,分析计算以判断高压空气管网是否会产生泄漏。最后根据仿真结果提出防止泄漏的有效方法,为工业中保证高压管道安全运行提供参考。 展开更多
关键词 高压空气管网 电磁阀 压力脉冲 瞬态特性
下载PDF
上一页 1 2 7 下一页 到第
使用帮助 返回顶部