Tungstated zirconia(WO_(3)/ZrO_(2))solid acid catalysts with different WO_(3) contents were prepared by a hydrothermal method and then used in the catalytic aquathermolysis of heavy oil from Xinjiang.The WO_(3)/ZrO_(2...Tungstated zirconia(WO_(3)/ZrO_(2))solid acid catalysts with different WO_(3) contents were prepared by a hydrothermal method and then used in the catalytic aquathermolysis of heavy oil from Xinjiang.The WO_(3)/ZrO_(2) solid acid catalyst was characterized by a range of characterization methods,including X-ray diffraction,NH3-temperature programmed desorption,and pyridine infrared spectroscopy.The WO_(3) content of the WO_(3)/ZrO_(2) catalysts had an important impact on the structure and property of the catalysts.When the WO_(3) mass fraction was 20%,it facilitated the formation of tetragonal zirconia,thereby enhancing the creation of robust acidic sites.Acidity is considered to have a strong impact on the catalytic performance of the aquathermolysis of heavy oil.When the catalyst containing 20%WO_(3) was used to catalyze the aquathermolysis of heavy oil under conditions of 14.5 MPa,340℃,and 24 h,the viscosity of heavy oil decreased from 47266 to 5398 mPa·s and the viscosity reduction rate reached 88.6%.The physicochemical properties of heavy oil before and after the aquathermolysis were analyzed using a saturates,aromatics,resins,and asphaltenes analysis,gas chromatography,elemental analysis,densimeter etc.After the aquathermolysis,the saturate and aromatic contents significantly increased from 43.3%to 48.35%and 19.47%to 21.88%,respectively,with large reductions in the content of resin and asphaltene from 28.22%to 25.06%and 5.36%to 2.03%,respectively.The sulfur and nitrogen contents,and the density of the oil were significantly decreased.These factors were likely the main reasons for promoting the viscosity reduction of heavy oil during the aquathermolysis over the WO_(3)/ZrO_(2) solid acid catalysts.展开更多
To obtain high yields of monocyclic aromatic hydrocarbons with methyl side chains,such as toluene and xylene,methane(CH_(4))can be introduced into the hydrocracking of polycyclic aromatic hydrocarbons.CH_(4)can partic...To obtain high yields of monocyclic aromatic hydrocarbons with methyl side chains,such as toluene and xylene,methane(CH_(4))can be introduced into the hydrocracking of polycyclic aromatic hydrocarbons.CH_(4)can participate in the reaction,supply methyl side chains to the product,and improve product distribution.In this study,the hydrogenation reaction of polycyclic aromatic hydrocarbons over a carbonized NiMo/Hβcatalyst in a CH_(4)and hydrogen(H_(2))environment was investigated to study the promotional effect of CH_(4)on the hydrocracking of polycyclic aromatics.Under conditions of 3.5 MPa,380℃,volume air velocity of 4 h^(-1),gas-oil volume ratio of 800,and H_(2):CH_(4)molar ratio of 1:1,the conversion rate of naphthalene was 99.97%,the liquid phase yield was 93.62%,and the selectivity of BTX were 17.76%,25.17%,and 20.47%,respectively.In comparison to the use of a H_(2)atmosphere,the selectivity of benzene was significantly decreased,whereas the selectivity of toluene and xylene were increased.It was shown that CH_(4)can participate in the hydrocracking of naphthalene and improve the selectivity of toluene and xylene in the liquid product.The carbonized NiMo/Hβcatalyst was characterized by a range of analytical methods(such as X-ray diffraction(XRD),ammonia-temperature-programmed desorption(NH3-TPD),hydrogen-temperature-programmed reduction(H_(2)-TPR),and X-ray photoelectron spectroscopy(XPS)).The results indicated that Ni and Mo carbides were the major species in the carbonized NiMo/Hβcatalyst and were considered to be active sites for the activation of CH_(4)and H_(2).After loading the metal components,the catalyst displayed prominent weak acidic sites,which may be suitable locations for cracking,alkylation,and other related reactions.Therefore,the carbonized NiMo/Hβcatalyst displayed multiple functions during the hydrocracking of polycyclic aromatic hydrocarbons in a CH_(4)and H_(2)environment.These results could be used to develop a new way to efficiently utilize polycyclic aromatic hydrocarbons and natural gas resources.展开更多
有序介孔氧化铝具有较大的比表面积、均匀且窄的孔径分布、有序的孔结构等特点,在多相催化反应及吸附分离过程中具有十分重要的应用价值,研究其合成及应用具有重要意义。以廉价的无机铝盐为铝源,结合模板剂,利用溶胶-凝胶法,通过改变模...有序介孔氧化铝具有较大的比表面积、均匀且窄的孔径分布、有序的孔结构等特点,在多相催化反应及吸附分离过程中具有十分重要的应用价值,研究其合成及应用具有重要意义。以廉价的无机铝盐为铝源,结合模板剂,利用溶胶-凝胶法,通过改变模板剂的种类、老化时间和温度等影响因素,制备有序介孔氧化铝。采用多种测试技术对其结构进行表征,探讨不同反应条件对合成有序介孔氧化铝结构的影响规律。结果表明,以二正丙胺为模板剂,在40℃条件下老化48 h,可合成比表面积为324.80 m 2·g^(-1),孔容为0.62 cm 3·g^(-1),平均孔径为6.07 nm的介孔氧化铝,且孔径分布较窄,孔道有序性良好。展开更多
The caustic alkali-free water extraction agents were studied for treating the oil sands excavated from Inner Mongolia, China. Several kinds of chemical reagents were evaluated, among which sodium carbonate(SC), sodium...The caustic alkali-free water extraction agents were studied for treating the oil sands excavated from Inner Mongolia, China. Several kinds of chemical reagents were evaluated, among which sodium carbonate(SC), sodium dodecyl benzene sulfonate(SD) and sodium chloride were confirmed as composite solutes. Their proportion was optimized by an orthogonal test. The optimum proportion of the composite agent covered 0.03% of SD, 0.50% of sodium chloride, 3.00% of SC, with the rest composed of water. The optimal operating condition was also confirmed. The oil sands were extracted at the following optimized conditions: a treating time of 15 min, a temperature of 80 ℃ and an extraction agent/feed ratio of 1:1, with the bitumen yield reaching more than 96%. The extraction agent after separation from the bitumen product can be recycled for reuse to carve out a good environmentally friendly route.展开更多
The Mo modified Ni/Al_2O_3 catalysts were prepared and sulfided at different temperatures, and their catalytic activity for thioetherification of mercaptans and olefins(or dienes), hydrogenation of dienes and olefins ...The Mo modified Ni/Al_2O_3 catalysts were prepared and sulfided at different temperatures, and their catalytic activity for thioetherification of mercaptans and olefins(or dienes), hydrogenation of dienes and olefins in the thioetherification process using fluidized catalytic cracking(FCC) naphtha as the feedstock was investigated. In order to disclose the correlation between the physicochemical characteristics of catalysts and their catalytic activity, the surface structures and properties of the catalysts sulfided at different temperatures were characterized by the high resolution transmission electronic microscopy(HRTEM), X-ray photoelectron spectroscopy(XPS) and H2-temperature programmed reduction(H_2-TPR) technique. The results showed that an increase of sulfurization temperature not only could promote the sulfurization degree of active metals on the catalysts, but also could adjust the micro-morphology of active species. These changes could improve the catalytic performance of thioetherification, and hydrogenation of dienes and olefins. However, an excess sulfurization temperature was more easily to upgrade the ability of the catalyst for hydrogenation of olefins, which could lead to a decrease of the octane number of the product. It was also showed that a moderate sulfurization temperature not only could improve the catalytic performance of thioetherification and hydrogenation of dienes but also could control hydrogenation of olefins.展开更多
基金the financial support from the Open Fund Project of the National Oil Shale Exploitation Research and Development Center,China(No.33550000-22-ZC0613-0255)the Graduate Student Innovation and Practical Ability Training Program of Xi’an Shiyou University(No.YCS23213098)+3 种基金the National Natural Science Foundation of China(No.52274039)the Natural Science Basic Research Plan in Shaanxi Province of China(Program No.2024JC-YBMS-085)the CNPC Innovation Found(No.2022DQ02-0402)The authors also thank the Modern Analysis and Test Center of Xi’an Shiyou University for their help with the characterization of catalysts and analysis of products.
文摘Tungstated zirconia(WO_(3)/ZrO_(2))solid acid catalysts with different WO_(3) contents were prepared by a hydrothermal method and then used in the catalytic aquathermolysis of heavy oil from Xinjiang.The WO_(3)/ZrO_(2) solid acid catalyst was characterized by a range of characterization methods,including X-ray diffraction,NH3-temperature programmed desorption,and pyridine infrared spectroscopy.The WO_(3) content of the WO_(3)/ZrO_(2) catalysts had an important impact on the structure and property of the catalysts.When the WO_(3) mass fraction was 20%,it facilitated the formation of tetragonal zirconia,thereby enhancing the creation of robust acidic sites.Acidity is considered to have a strong impact on the catalytic performance of the aquathermolysis of heavy oil.When the catalyst containing 20%WO_(3) was used to catalyze the aquathermolysis of heavy oil under conditions of 14.5 MPa,340℃,and 24 h,the viscosity of heavy oil decreased from 47266 to 5398 mPa·s and the viscosity reduction rate reached 88.6%.The physicochemical properties of heavy oil before and after the aquathermolysis were analyzed using a saturates,aromatics,resins,and asphaltenes analysis,gas chromatography,elemental analysis,densimeter etc.After the aquathermolysis,the saturate and aromatic contents significantly increased from 43.3%to 48.35%and 19.47%to 21.88%,respectively,with large reductions in the content of resin and asphaltene from 28.22%to 25.06%and 5.36%to 2.03%,respectively.The sulfur and nitrogen contents,and the density of the oil were significantly decreased.These factors were likely the main reasons for promoting the viscosity reduction of heavy oil during the aquathermolysis over the WO_(3)/ZrO_(2) solid acid catalysts.
基金the financial support from the Graduate Student Innovation and Practical Ability Training Program of Xi’an Shiyou University (No. YCS21212111)Open Fund Project of the State Key Laboratory of Heavy Oil, China (SKLHOP201703)+3 种基金National Natural Science Foundation of China (No. 52274039)Natural Science Foundation of Shaanxi Provincial Department of Education (Grant 2023-JC-YB-414)Natural Science Foundation of Shaanxi Province in China (No. 2022JZ-28)the Open Fund Project of the National Oil Shale Exploitation Research and Development Center, China (No. 33550022-ZC0613-0255)
文摘To obtain high yields of monocyclic aromatic hydrocarbons with methyl side chains,such as toluene and xylene,methane(CH_(4))can be introduced into the hydrocracking of polycyclic aromatic hydrocarbons.CH_(4)can participate in the reaction,supply methyl side chains to the product,and improve product distribution.In this study,the hydrogenation reaction of polycyclic aromatic hydrocarbons over a carbonized NiMo/Hβcatalyst in a CH_(4)and hydrogen(H_(2))environment was investigated to study the promotional effect of CH_(4)on the hydrocracking of polycyclic aromatics.Under conditions of 3.5 MPa,380℃,volume air velocity of 4 h^(-1),gas-oil volume ratio of 800,and H_(2):CH_(4)molar ratio of 1:1,the conversion rate of naphthalene was 99.97%,the liquid phase yield was 93.62%,and the selectivity of BTX were 17.76%,25.17%,and 20.47%,respectively.In comparison to the use of a H_(2)atmosphere,the selectivity of benzene was significantly decreased,whereas the selectivity of toluene and xylene were increased.It was shown that CH_(4)can participate in the hydrocracking of naphthalene and improve the selectivity of toluene and xylene in the liquid product.The carbonized NiMo/Hβcatalyst was characterized by a range of analytical methods(such as X-ray diffraction(XRD),ammonia-temperature-programmed desorption(NH3-TPD),hydrogen-temperature-programmed reduction(H_(2)-TPR),and X-ray photoelectron spectroscopy(XPS)).The results indicated that Ni and Mo carbides were the major species in the carbonized NiMo/Hβcatalyst and were considered to be active sites for the activation of CH_(4)and H_(2).After loading the metal components,the catalyst displayed prominent weak acidic sites,which may be suitable locations for cracking,alkylation,and other related reactions.Therefore,the carbonized NiMo/Hβcatalyst displayed multiple functions during the hydrocracking of polycyclic aromatic hydrocarbons in a CH_(4)and H_(2)environment.These results could be used to develop a new way to efficiently utilize polycyclic aromatic hydrocarbons and natural gas resources.
文摘有序介孔氧化铝具有较大的比表面积、均匀且窄的孔径分布、有序的孔结构等特点,在多相催化反应及吸附分离过程中具有十分重要的应用价值,研究其合成及应用具有重要意义。以廉价的无机铝盐为铝源,结合模板剂,利用溶胶-凝胶法,通过改变模板剂的种类、老化时间和温度等影响因素,制备有序介孔氧化铝。采用多种测试技术对其结构进行表征,探讨不同反应条件对合成有序介孔氧化铝结构的影响规律。结果表明,以二正丙胺为模板剂,在40℃条件下老化48 h,可合成比表面积为324.80 m 2·g^(-1),孔容为0.62 cm 3·g^(-1),平均孔径为6.07 nm的介孔氧化铝,且孔径分布较窄,孔道有序性良好。
文摘The caustic alkali-free water extraction agents were studied for treating the oil sands excavated from Inner Mongolia, China. Several kinds of chemical reagents were evaluated, among which sodium carbonate(SC), sodium dodecyl benzene sulfonate(SD) and sodium chloride were confirmed as composite solutes. Their proportion was optimized by an orthogonal test. The optimum proportion of the composite agent covered 0.03% of SD, 0.50% of sodium chloride, 3.00% of SC, with the rest composed of water. The optimal operating condition was also confirmed. The oil sands were extracted at the following optimized conditions: a treating time of 15 min, a temperature of 80 ℃ and an extraction agent/feed ratio of 1:1, with the bitumen yield reaching more than 96%. The extraction agent after separation from the bitumen product can be recycled for reuse to carve out a good environmentally friendly route.
基金support provided by the National Natural Science Foundation of China(Granted No.21276276)
文摘The Mo modified Ni/Al_2O_3 catalysts were prepared and sulfided at different temperatures, and their catalytic activity for thioetherification of mercaptans and olefins(or dienes), hydrogenation of dienes and olefins in the thioetherification process using fluidized catalytic cracking(FCC) naphtha as the feedstock was investigated. In order to disclose the correlation between the physicochemical characteristics of catalysts and their catalytic activity, the surface structures and properties of the catalysts sulfided at different temperatures were characterized by the high resolution transmission electronic microscopy(HRTEM), X-ray photoelectron spectroscopy(XPS) and H2-temperature programmed reduction(H_2-TPR) technique. The results showed that an increase of sulfurization temperature not only could promote the sulfurization degree of active metals on the catalysts, but also could adjust the micro-morphology of active species. These changes could improve the catalytic performance of thioetherification, and hydrogenation of dienes and olefins. However, an excess sulfurization temperature was more easily to upgrade the ability of the catalyst for hydrogenation of olefins, which could lead to a decrease of the octane number of the product. It was also showed that a moderate sulfurization temperature not only could improve the catalytic performance of thioetherification and hydrogenation of dienes but also could control hydrogenation of olefins.
