Photocatalytic degradation of methylene blue over MIL-100(Fe)/GO composites: a performance and kinetic study

Adsorption coupled with photocatalytic degradation is proposed to fulfill the removal and thorough elimination of organic dyes.Herein,we report a facile hydrothermal synthesis of MIL-100(Fe)/GO photocatalysts.The adsorption and photocatalytic degradation process of methylene blue(MB)on MIL‐100(Fe)/GO composites were systematically studied from performance and kinetic perspectives.A possible adsorption‐photocatalytic degradation mechanism is proposed.The optimized 1M8G composite achieves 95%MB removal(60.8 mg/g)in 210 min and displays well recyclability over ten cycles.The obtained MB adsorption and degradation results are well fitted onto Langmuir isotherm and pseudo‐second order kinetic model.This study shed light on the design of MOFs based composites for water treatment.

Spray pyrolysis feasibility of tungsten substitution for cobalt in nickel-rich cathode materials

Cobalt(Co)serves as a stabilizer in the lattice structure of high-capacity nickel(Ni)-rich cathode materials.However,its high cost and toxicity still limit its development.In general,it is possible to perform transition metal substitution to reduce the Co content.However,the traditional coprecipitation method cannot satisfy the requirements of multielement coprecipitation and uniform distribution of elements due to the differences between element concentration and deposition rate.In this work,spray pyrolysis was used to prepare LiNi_(0.9)Co_(0.1-x)W_(x)O_(2)(LNCW).In this regard,the pyrolysis behavior of ammonium metatungstate was analyzed,together with the substitu-tion of W for Co.With the possibility of spray pyrolysis,the Ni-Co-W-containing oxide precursor presents a homogeneous distribution of metal elements,which is beneficial for the uniform substitution of W in the final materials.It was observed that with W substitution,the size of primary particles decreased from 338.06 to 71.76 nm,and cation disordering was as low as 3.34%.As a consequence,the pre-pared LNCW exhibited significantly improved electrochemical performance.Under optimal conditions,the lithium-ion battery assembled with LiNi_(0.9)Co_(0.0925)W_(0.0075)O_(2)(LNCW-0.75mol%)had an improved capacity retention of 82.7%after 200 cycles,which provides insight in-to the development of Ni-rich low-Co materials.This work presents that W can compensate for the loss caused by Co deficiency to a cer-tain extent.

Fischer–Tropsch synthesis over iron catalysts with corncob-derived promoters

A sustainable strategy for Fischer–Tropsch iron catalysts is successfully achieved by embedding of synergistic promoters from a renewable resource, corncob. The iron-based catalysts, named as 'corncob-driven'catalysts, are composed of iron species supported on carbon as primary active components and various minerals(K, Mg, Ca, and Si, etc.) as promoters. The corncob-driven catalysts are facilely synthesized by a one-pot hydrothermal treatment under mild conditions. The characterization results indicate that the formation of iron carbides from humboldtine is clearly enhanced and the morphology of catalyst particles tends to be more regular microspheres after adding corncob. It is observed that the optimized corncob-driven catalyst exhibits a higher conversion than without promoters' catalyst in Fischer–Tropsch synthesis(ca. 73% vs. ca. 49%). More importantly, a synergistic effect exists in multiple promoters from corncob that can enhance heavy hydrocarbons selectivity and lower CO_2 selectivity, obviously different from the catalyst with promoters from chemicals. The proposed synthesis route of corncob-driven catalysts provides new strategies for the utilization of renewable resources and elimination of environmental pollutants from chemical promoters.

Research on the Construction of Industrial Catalysis Course Under the Background of Specialty-Innovation Integration

“Specialty-innovation integration”is a positive response of higher education to economic and social development needs,and it is also an inherent requirement for the reform and development of higher education.This paper discusses the construction of an“industrial catalysis”curriculum system under the background of specialty-innovation integration.Overall,it raises students’comprehensive quality from three aspects,including teaching content,teaching method,and the concept of specialty-innovation integration,aiming to cultivate students as the innovative talents required by the development of the era for national and regional development.