The Sm–Zr–Fe–Co–Ti quinary-alloys with ThMn12 structure has attracted wide attention for ultra-high intrinsic magnetic properties,showing potentiality to be developed into rare-earth permanent magnets.The Ti eleme...The Sm–Zr–Fe–Co–Ti quinary-alloys with ThMn12 structure has attracted wide attention for ultra-high intrinsic magnetic properties,showing potentiality to be developed into rare-earth permanent magnets.The Ti element in alloys is crucial for phase stability and magnetic properties,and lower Ti content can increase intrinsic magnetic properties but reduce phase stability.In this study,the 1:12 single-phase melt-spun ribbons with low Ti content was successfully prepared using a rapid solidification non-equilibrium method for the Sm1.1Zr_(0.2)Fe_(9.2)Co_(2.3)Ti_(0.5) quinary-alloy.However,this non-equilibrium ribbon did not achieve good magnetic hardening due to the uneven microstructure and microstrain.Then,annealing was carried out to eliminate micro-strain and homogenize microstructure,therefore,remanence and coercivity were significantly improved even the precipitation of a small amount of a-Fe phase which were not conducive to coercivity.The remanence of 86.1 emu/g and coercivity of 151 kA/m was achieved when annealing at 850℃ for 45 min.After hot pressing,under the action of high temperature and pressure,a small portion of ThMn12 phases in the magnet decompose into Sm-rich phases and a-Fe,while remanence of 4.02 kGs(1 Gs=10^(-4) T),and coercivity of 1.12 kOe(1 Oe=79.5775 A·m^(-1))were still acquired.Our findings can provide reference for exploring practical permanent magnets made of 1:12 type quinary-alloys.展开更多
Fluid flow at nanoscale is closely related to many areas in nature and technology(e.g.,unconventional hydrocarbon recovery,carbon dioxide geo-storage,underground hydrocarbon storage,fuel cells,ocean desalination,and b...Fluid flow at nanoscale is closely related to many areas in nature and technology(e.g.,unconventional hydrocarbon recovery,carbon dioxide geo-storage,underground hydrocarbon storage,fuel cells,ocean desalination,and biomedicine).At nanoscale,interfacial forces dominate over bulk forces,and nonlinear effects are important,which significantly deviate from conventional theory.During the past decades,a series of experiments,theories,and simulations have been performed to investigate fluid flow at nanoscale,which has advanced our fundamental knowledge of this topic.However,a critical review is still lacking,which has seriously limited the basic understanding of this area.Therefore herein,we systematically review experimental,theoretical,and simulation works on single-and multi-phases fluid flow at nanoscale.We also clearly point out the current research gaps and future outlook.These insights will promote the significant development of nonlinear flow physics at nanoscale and will provide crucial guidance on the relevant areas.展开更多
Field evidence indicates that proppant distribution and threshold pressure gradient have great impacts on well productivity.Aiming at the development of unconventional oil reservoirs in Triassic Chang-7 Unit,Ordos Bas...Field evidence indicates that proppant distribution and threshold pressure gradient have great impacts on well productivity.Aiming at the development of unconventional oil reservoirs in Triassic Chang-7 Unit,Ordos Basin of China,we presented an integrated workflow to investigate how(1)proppant placement in induced fracture and(2)non-linear flow in reservoir matrix would affect well productivity and fluid flow in the reservoir.Compared with our research before(Yue et al.,2020),here we extended this study into the development of multi-stage fractured horizontal wells(MFHWs)with large-scale complicated fracture geometry.The integrated workflow is based on the finite element method and consists of simulation models for proppant-laden fluid flow,fracture flow,and non-linear seepage flow,respectively.Simulation results indicate that the distribution of proppant inside the induced cracks significantly affects the productivity of the MFHW.When we assign an idealized proppant distribution instead of the real distribution,there will be an overestimation of 44.98%in daily oil rate and 30.63%in cumulative oil production after continuous development of 1000 days.Besides,threshold pressure gradient(TPG)also significantly affects the well performance in tight oil reservoirs.If we simply apply linear Darcy’s law to the reservoir matrix,the overall cumulative oil production can be overrated by 77%after 1000 days of development.In general,this research provides new insights into the development of tight oil reservoirs with TPG and meanwhile reveals the significance of proppant distribution and non-linear fluid flow in the production scenario design.展开更多
Recently,SnPS_(3) has gained attention as an impressive sodium-ion battery anode material because of its significant theoretical specific capacity derived from the conversion-alloying reaction mechanism.Nevertheless,i...Recently,SnPS_(3) has gained attention as an impressive sodium-ion battery anode material because of its significant theoretical specific capacity derived from the conversion-alloying reaction mechanism.Nevertheless,its practical applicability is restricted by insufficient rate ability,and severe capacity loss due to inadequate electrical conductivity and dramatic volume expansion.Inspired by the electrochemical enhancement effect of MXene substrates and the innovative Lewis acidic etching for MXene preparation,SnPS_(3)/Ti_(3)C_(2)T_(x) MXene(T=-Cl and-O) is constructed by synchronously phospho-sulfurizing Sn/Ti_(3)C_(2)T_(x) precursor.Benefiting from the boosted Na^(+) diffusion and electron transfer rates,as well as the mitigated stress expansion,the synthesized SnPS_(3/)Ti_(3)C_(2)T_(x) composite demonstrates enhanced rate capability(647 mA h g^(-1) at 10 A g^(-1)) alongside satisfactory long-term cycling stability(capacity retention of 94.6% after 2000 cycles at 5 A g^(-1)).Importantly,the assembled sodium-ion full cell delivers an impressive capacity retention of 97.7% after undergoing 1500 cycles at 2 A g^(-1).Moreover,the sodium storage mechanism of the SnPS_(3/)Ti_(3)C_(2)T_(x) electrode is elucidated through in-situ and ex-situ characterizations.This work proposes a novel approach to ameliorate the energy storage performance of thiophosphites by facile in-situ construction of composites with MXene.展开更多
Despite achieving a high cure rate with the direct-acting antivirals(DAAs)in hepatitis C treatment,further research is needed to identify additional benefits of the DAA therapy.The current study evaluated liver fibros...Despite achieving a high cure rate with the direct-acting antivirals(DAAs)in hepatitis C treatment,further research is needed to identify additional benefits of the DAA therapy.The current study evaluated liver fibrosis improvement in 848 hepatitis C patients treated with DAAs,who also achieved sustained virologic response.By the fibrosis-4(FIB-4)index,patients were categorized based on their baseline fibrosis levels,and the improvement in fibrosis was analyzed in both short-term(9-26 weeks)and long-term(≥36 weeks)follow-up.The results showed a significant decrease in the FIB-4 index,indicating an improvement in liver fibrosis,in 63.0%and 67.6%of the patients during the short-term and long-term follow-up,respectively.Short-term improvement was associated with factors including ribavirin usage,blood cholinesterase levels,alanine transaminase levels,albumin levels,and the baseline FIB-4 index,while long-term improvement was associated with factors such as aspartate transaminase levels,total protein level,and the baseline FIB-4 index.The current study emphasizes the importance of continuous assessment and post-treatment monitoring of liver fibrosis,which will provide crucial insights for enhancing patient care in hepatitis C management.展开更多
基金the National Key Research and De-velopment Program of China(Grant No.2021YFB3500300)the National Natural Science Foundation of China(Grant No.51931007)the Program of Top Disciplines Construc-tion in Beijing(Grant No.PXM2019014204500031).
文摘The Sm–Zr–Fe–Co–Ti quinary-alloys with ThMn12 structure has attracted wide attention for ultra-high intrinsic magnetic properties,showing potentiality to be developed into rare-earth permanent magnets.The Ti element in alloys is crucial for phase stability and magnetic properties,and lower Ti content can increase intrinsic magnetic properties but reduce phase stability.In this study,the 1:12 single-phase melt-spun ribbons with low Ti content was successfully prepared using a rapid solidification non-equilibrium method for the Sm1.1Zr_(0.2)Fe_(9.2)Co_(2.3)Ti_(0.5) quinary-alloy.However,this non-equilibrium ribbon did not achieve good magnetic hardening due to the uneven microstructure and microstrain.Then,annealing was carried out to eliminate micro-strain and homogenize microstructure,therefore,remanence and coercivity were significantly improved even the precipitation of a small amount of a-Fe phase which were not conducive to coercivity.The remanence of 86.1 emu/g and coercivity of 151 kA/m was achieved when annealing at 850℃ for 45 min.After hot pressing,under the action of high temperature and pressure,a small portion of ThMn12 phases in the magnet decompose into Sm-rich phases and a-Fe,while remanence of 4.02 kGs(1 Gs=10^(-4) T),and coercivity of 1.12 kOe(1 Oe=79.5775 A·m^(-1))were still acquired.Our findings can provide reference for exploring practical permanent magnets made of 1:12 type quinary-alloys.
基金the funding support from the National Natural Science Foundation of China(51974013 and 11372033)the Open Research Foundation(NEPU-EOR-2019-003)the initiative funding from the University of Science and Technology Beijing.
文摘Fluid flow at nanoscale is closely related to many areas in nature and technology(e.g.,unconventional hydrocarbon recovery,carbon dioxide geo-storage,underground hydrocarbon storage,fuel cells,ocean desalination,and biomedicine).At nanoscale,interfacial forces dominate over bulk forces,and nonlinear effects are important,which significantly deviate from conventional theory.During the past decades,a series of experiments,theories,and simulations have been performed to investigate fluid flow at nanoscale,which has advanced our fundamental knowledge of this topic.However,a critical review is still lacking,which has seriously limited the basic understanding of this area.Therefore herein,we systematically review experimental,theoretical,and simulation works on single-and multi-phases fluid flow at nanoscale.We also clearly point out the current research gaps and future outlook.These insights will promote the significant development of nonlinear flow physics at nanoscale and will provide crucial guidance on the relevant areas.
基金The authors gratefully acknowledge the financial supports from the National Science Foundation of China under Grant 52274027 as well as the High-end Foreign Experts Recruitment Plan of the Ministry of Science and Technology China under Grant G2022105027L.
文摘Field evidence indicates that proppant distribution and threshold pressure gradient have great impacts on well productivity.Aiming at the development of unconventional oil reservoirs in Triassic Chang-7 Unit,Ordos Basin of China,we presented an integrated workflow to investigate how(1)proppant placement in induced fracture and(2)non-linear flow in reservoir matrix would affect well productivity and fluid flow in the reservoir.Compared with our research before(Yue et al.,2020),here we extended this study into the development of multi-stage fractured horizontal wells(MFHWs)with large-scale complicated fracture geometry.The integrated workflow is based on the finite element method and consists of simulation models for proppant-laden fluid flow,fracture flow,and non-linear seepage flow,respectively.Simulation results indicate that the distribution of proppant inside the induced cracks significantly affects the productivity of the MFHW.When we assign an idealized proppant distribution instead of the real distribution,there will be an overestimation of 44.98%in daily oil rate and 30.63%in cumulative oil production after continuous development of 1000 days.Besides,threshold pressure gradient(TPG)also significantly affects the well performance in tight oil reservoirs.If we simply apply linear Darcy’s law to the reservoir matrix,the overall cumulative oil production can be overrated by 77%after 1000 days of development.In general,this research provides new insights into the development of tight oil reservoirs with TPG and meanwhile reveals the significance of proppant distribution and non-linear fluid flow in the production scenario design.
基金financially National Natural Science Foundation of China (Grant Number: 22265018)Key Project of Natural Science Foundation of Jiangxi Province (Grant Number: 20232ACB204010)。
文摘Recently,SnPS_(3) has gained attention as an impressive sodium-ion battery anode material because of its significant theoretical specific capacity derived from the conversion-alloying reaction mechanism.Nevertheless,its practical applicability is restricted by insufficient rate ability,and severe capacity loss due to inadequate electrical conductivity and dramatic volume expansion.Inspired by the electrochemical enhancement effect of MXene substrates and the innovative Lewis acidic etching for MXene preparation,SnPS_(3)/Ti_(3)C_(2)T_(x) MXene(T=-Cl and-O) is constructed by synchronously phospho-sulfurizing Sn/Ti_(3)C_(2)T_(x) precursor.Benefiting from the boosted Na^(+) diffusion and electron transfer rates,as well as the mitigated stress expansion,the synthesized SnPS_(3/)Ti_(3)C_(2)T_(x) composite demonstrates enhanced rate capability(647 mA h g^(-1) at 10 A g^(-1)) alongside satisfactory long-term cycling stability(capacity retention of 94.6% after 2000 cycles at 5 A g^(-1)).Importantly,the assembled sodium-ion full cell delivers an impressive capacity retention of 97.7% after undergoing 1500 cycles at 2 A g^(-1).Moreover,the sodium storage mechanism of the SnPS_(3/)Ti_(3)C_(2)T_(x) electrode is elucidated through in-situ and ex-situ characterizations.This work proposes a novel approach to ameliorate the energy storage performance of thiophosphites by facile in-situ construction of composites with MXene.
基金sponsored by the National Natural Science Foundation of China(Grant No.82273691)the Natural Science Foundation of Jiangsu Province(Grant No.BK20190106)+2 种基金the Nanjing Important Science&Technology Specific Projects(Grant No.2021-11005)the National Natural Youth Science Foundation of China(Grant No.81703273)the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘Despite achieving a high cure rate with the direct-acting antivirals(DAAs)in hepatitis C treatment,further research is needed to identify additional benefits of the DAA therapy.The current study evaluated liver fibrosis improvement in 848 hepatitis C patients treated with DAAs,who also achieved sustained virologic response.By the fibrosis-4(FIB-4)index,patients were categorized based on their baseline fibrosis levels,and the improvement in fibrosis was analyzed in both short-term(9-26 weeks)and long-term(≥36 weeks)follow-up.The results showed a significant decrease in the FIB-4 index,indicating an improvement in liver fibrosis,in 63.0%and 67.6%of the patients during the short-term and long-term follow-up,respectively.Short-term improvement was associated with factors including ribavirin usage,blood cholinesterase levels,alanine transaminase levels,albumin levels,and the baseline FIB-4 index,while long-term improvement was associated with factors such as aspartate transaminase levels,total protein level,and the baseline FIB-4 index.The current study emphasizes the importance of continuous assessment and post-treatment monitoring of liver fibrosis,which will provide crucial insights for enhancing patient care in hepatitis C management.
