An efficient room-temperature self-powered,broadband(300 nm–1100 nm)photodetector based on a CuO–TiO_(2)/TiO_(2)/p-Si(100)heterostructure is demonstrated.The CuO–TiO_(2)nanocomposites were grown in a two-zone horiz...An efficient room-temperature self-powered,broadband(300 nm–1100 nm)photodetector based on a CuO–TiO_(2)/TiO_(2)/p-Si(100)heterostructure is demonstrated.The CuO–TiO_(2)nanocomposites were grown in a two-zone horizontal tube furnace on a 40 nm TiO_(2)thin film deposited on a p-type Si(100)substrate.The CuO–TiO_(2)/TiO_(2)/p-Si(100)devices exhibited excellent rectification characteristics under dark and individual photoillumination conditions.The devices showed remarkable photo-response under broadband(300–1100 nm)light illumination at zero bias voltage,indicating the achievement of highly sensitive self-powered photodetectors at visible and near-infrared light illuminations.The maximum response of the devices is observed at 300 nm for an illumination power of 10 W.The response and recovery times were calculated as 86 ms and 78 ms,respectively.Moreover,under a small bias,the devices showed a prompt binary response by altering the current from positive to negative under illumination conditions.The main reason behind this binary response is the low turn-on voltage and photovoltaic characteristics of the devices.Under illumination conditions,the generation of photocurrent is due to the separation of photogenerated electron-hole pairs within the built-in electric field at the CuO–TiO_(2)/TiO_(2)interface.These characteristics make the CuO–TiO_(2)/TiO_(2)broadband photodetectors suitable for applications that require high response speeds and self-sufficient functionality.展开更多
In this work,forward current voltage characteristics for multi-quantum wells Al_(0.33)Ga_(0.67)As Schottky diode were measured at temperature ranges from 100 to 300 K.The main parameters of this Schottky diode,such as...In this work,forward current voltage characteristics for multi-quantum wells Al_(0.33)Ga_(0.67)As Schottky diode were measured at temperature ranges from 100 to 300 K.The main parameters of this Schottky diode,such as the ideality factor,barrier height,series resistance and saturation current,have been extracted using both analytical and heuristics methods.Differential evolution(DE),particle swarm optimization(PSO)and artificial bee colony(ABC)have been chosen as candidate heuristics algorithms,while Cheung technic was selected as analytical extraction method.The obtained results show clearly the high performance of DE algorithms in terms of parameters accuracy,convergence speed and robustness.展开更多
基金CSIR-09/0973(11599)/2021-EMR-I and SERB(Project no:CRG/2021/000255),Department of Science and Technology,Govt.of India。
文摘An efficient room-temperature self-powered,broadband(300 nm–1100 nm)photodetector based on a CuO–TiO_(2)/TiO_(2)/p-Si(100)heterostructure is demonstrated.The CuO–TiO_(2)nanocomposites were grown in a two-zone horizontal tube furnace on a 40 nm TiO_(2)thin film deposited on a p-type Si(100)substrate.The CuO–TiO_(2)/TiO_(2)/p-Si(100)devices exhibited excellent rectification characteristics under dark and individual photoillumination conditions.The devices showed remarkable photo-response under broadband(300–1100 nm)light illumination at zero bias voltage,indicating the achievement of highly sensitive self-powered photodetectors at visible and near-infrared light illuminations.The maximum response of the devices is observed at 300 nm for an illumination power of 10 W.The response and recovery times were calculated as 86 ms and 78 ms,respectively.Moreover,under a small bias,the devices showed a prompt binary response by altering the current from positive to negative under illumination conditions.The main reason behind this binary response is the low turn-on voltage and photovoltaic characteristics of the devices.Under illumination conditions,the generation of photocurrent is due to the separation of photogenerated electron-hole pairs within the built-in electric field at the CuO–TiO_(2)/TiO_(2)interface.These characteristics make the CuO–TiO_(2)/TiO_(2)broadband photodetectors suitable for applications that require high response speeds and self-sufficient functionality.
文摘In this work,forward current voltage characteristics for multi-quantum wells Al_(0.33)Ga_(0.67)As Schottky diode were measured at temperature ranges from 100 to 300 K.The main parameters of this Schottky diode,such as the ideality factor,barrier height,series resistance and saturation current,have been extracted using both analytical and heuristics methods.Differential evolution(DE),particle swarm optimization(PSO)and artificial bee colony(ABC)have been chosen as candidate heuristics algorithms,while Cheung technic was selected as analytical extraction method.The obtained results show clearly the high performance of DE algorithms in terms of parameters accuracy,convergence speed and robustness.
