铜-焦脱镁叶绿酸a甲酯的合成及抗肿瘤活性研究实验教学设计

本实验设计合成了铜-焦脱镁叶绿酸a甲酯(Cu-MPPa),用于活性氧(ROS)介导的癌症治疗和消耗谷胱甘肽,并通过类Fenton反应循环产氧维持细胞内高浓度氧。实验过程中考察了Cu-MPPa的活性氧产生能力、氧气产生能力和谷胱甘肽消耗能力等性能。所合成中间体的结构用质谱进行了表征。这个实验综合了有机化学合成、仪器分析化学和生物化学实验,要求由三名学生组成实验小组,大约需要24学时,旨在培养学生综合创新能力、解决复杂问题能力和培养团队合作精神。

Heterostructured Pt-Ni_(3)Mo_(3)N formed via ammonia-containing polyoxometalates for highly efficient electrocatalytic hydrogen evolution in acid medium

Constructing heterostructured nanohybrid is considered as a prominent route to fabricate alternative electrocatalysts to commercial Pt/C for hydrogen evolution reaction(HER).In this work,(NH_(4))_(4)[NiH_(6)Mo_(6)O_(4)]·5H_(2)O polyoxometalates(NiMo_(6))are adopted as the cluster precursors for simple fabrication of heterostructured Pt-Ni_(3)Mo_(3)N nanohybrids supported by carbon black(Pt-Ni_(3)Mo_(3)N/C)without using additional N sources.The improved porosity and enhanced electronic interaction of Pt-Ni_(3)Mo_(3)N/C should be attributed to the integration of Pt with NiMo_(6),which favors the mass transport,promotes the formation of exposed catalytic sites,and benefits the regulation of intrinsic activity.Thus,the as-obtained Pt-Ni_(3)Mo_(3)N/C exhibits impressive and durable HER performance as indicated by the low overpotential of 13.7 mV at the current density of 10 mA cm^(-2) and the stable overpotential during continuous working at 100 mA cm^(-2) for 100 h.This work provides significant insights for the synthesis of new highly active heterostructured electrocatalysts for renewable energy devices.

Plastic deformation behavior of a Cu-10Ta alloy under strong impact loading

In this work,a Cu-10Ta alloy with a copper to tantalum mass ratio of 9:1 is prepared using powder metallurgy technology.Physical properties of the alloy,including density,microstructure,melting point,and constant-volume specific heat,are tested.Via the split Hopkinson pressure bar(SHPB)and flyerplate impact experiments,the relationship between equivalent stress and equivalent plastic strain of the material is studied at temperatures of 298-823 K and under strain rates of 1×10^(-3)-5.2×10^(3)s^(-1),and the Hugoniot relationship at impact pressures of 1.46-17.25 GPa and impact velocities of 108-942 m/s is obtained.Evolution of the Cu-10Ta microstructure that occurs during high-strain-rate impact is analyzed.Results indicate that the Cu-10Ta alloy possesses good thermal stability,and at ambient temperatures of up to 50%its melting point,stress softening of less than 15%of the initial strength is observed.A modified J-C constitutive model is employed to accurately predict the variation of yield strength with strain rate.Under strong impact,the copper phase is identified as the primary source of plastic deformation in the Cu-10Ta alloy,while significant deformation of the high-strength tantalum particles is less pronounced.Furthermore,the longitudinal wave speed D is found to correlate linearly with the particle velocity u upon strong impact.Analysis reveals that the sound speed and spallation strength of the alloy increase with increasing impact pressure.

Molecule aging induced by electron attacking

Here we propose a new concept of"molecule aging":with some special treatment,a molecule could be"aged"by losing some unknown tiny particles or pieces from atoms in the molecule,Such"aging"or loss of unknown tiny particles does not change apparently its molecular structure or chemical composition,but some physicochemical properties could be changed irreversibly.We further confirm such"molecule aging"via a long-term electron attacking to age water(H_(2)O)molecules.The IR spectra show no structural difference between the fresh water and the aged one,while the NMR spectra show that the electron attacking can decrease the size of water clusters.Such facts indicate that the electron attacking indeed can"affect"the structure of water molecule slightly but without damaging to its basic molecule frame.Further exploration reveals that the hydrogen evolution reaction(HER)activity of the aged water molecule is lower than the fresh water on the same Pt/C electrocatalyst.The density functional theory calculations indicate that the shortened O-H bond in H_(2)O indeed can present lower HER activity,so the observed size decrease of water clusters from NMR probably could be attributed to the shortening of O-H bond in water molecules.Such results indicate significantly that the molecule aging can produce materials with new functions for new possible applications.

钒掺杂钨青铜内通道氨配位的钌单原子用于高效析氢反应

通过电解水制备氢气是实现“碳中和”目标的理想途径之一.因此,可在全p H条件下使用的氢析出(HER)催化剂的研发是近年来电催化领域的研究热点.原子级分散的催化剂,能够在保留铂族金属(PGM)固有活性的同时,降低催化剂中PGM的用量.虽然可以通过X射线吸收光谱(XAS)来表征原子分散的PGM电催化剂的配位环境,但目前对原子空间分布的控制仍然具有挑战.本文制备了钒掺杂钨青铜内通道氨配位的钌单原子催化剂(Ru/V-NHWO),用于全p H范围内的HER反应.采用X射线衍射(XRD)、高角环形暗场扫描透射电镜(HAADF-STEM)、X射线光电子能谱(XPS)和原位X射线吸收光谱(XAS)等进行表征,研究了钌单原子与V-NHWO载体的结合方式以及构效关系,并采用密度泛函理论(DFT)计算探索了催化剂中诸多位点的活性贡献.在1 mol/LKOH, 0.5 mol/L H_(2)SO_(4)和1 mol/L磷酸盐缓冲溶液中,其在10 m Acm^(-2)下的过电位分别为28.0, 29.6和40.6 m V.同时,在过电位100 m V时,质量活性分别达到3930, 1941和602.8 m Amg^(-1)Ru,数倍于同等条件下的商业铂碳.XRD结果表明,钌的引入可以确保催化剂在氩气条件下热解后仍保持六方钨铵青铜晶相,证明钌与钨铵青铜六方晶体通道内氨物种,即“通道氨”的结合.HAADF-STEM结果表明,钌原子与NHWO间存在强烈相互作用,有助于提升HER性能.XPS和XAS结果表明, W5+信号出现在引入钌后,峰位置的结合能增加且峰面积降低,说明钌与通道氨之间存在相互作用.N的XPS结果表明,钌的引入导致了金属氨键的形成.XAS结果表明, Ru/V-NHWO/CC中钌单原子和钌团簇共存,钌单原子与通道氨配位,并且钒的引入会诱发V-NHWO中金属键长缩短,这表明催化剂的金属性得到了提升,有利于改善其导电性.采用DFT计算进一步研究了HER活性的来源.相比于V-NHWO载体和钌团簇修饰的V-NHWO,以单原子形式结合的钌具有更低的水解离能垒,该能垒在氨桥接的钌双原子垂直插入、钒掺杂和多通道插入等多种因素作用下进一步降低.同时,氢中间体结合能得到了相应的优化而趋近于0 e V.此外,差分电荷密度模拟结果表明,氢中间体结合后, V-NHWO对于钌单原子存在明显的供电子行为,有利于HER动力学过程.综上,本工作报道了金属载体对于高分散金属原子空间分布调控的重要作用,可为设计和构筑可应用于诸多能源转换过程的新型原子级分散催化剂提供参考.

非Pt基催化剂在质子交换膜燃料电池阴极氧还原反应中的研究进展

对绿色、高效能源储存装置日趋强烈的需求,使得用于清洁能源转换的先进技术获得了研究者的密切关注。具有环境友好、高能量转换效率等优势的燃料电池是传统能源转换装置极具希望的替代品。然而,工业催化界中商业化程度高的Pt体系催化剂存在成本高、稳定性差和抗毒化能力弱等问题,限制了燃料电池的进一步发展。开发储量丰富、成本低廉且性能优异的非Pt体系氧还原(ORR)催化剂是降低燃料电池成本,促进其大规模应用的有效途径。对此,结合近10年来国内外研究成果,系统介绍了当前各类非Pt体系ORR催化剂的研究进展,包括非贵金属基以及非金属基催化剂。同时,针对各类催化剂的优点、不足及改性策略进行了归纳与总结,并对未来ORR电催化剂的发展提出挑战、做出展望。

3D printing of personalized polylactic acid scaffold laden with GelMA/autologous auricle cartilage to promote ear reconstruction

At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional(3D)printing technology has made a great breakthrough in the clinical application of orthopedic implants.This study explored the combination of 3D printing and tissue engineering to precisely reconstruct the auricle.First,a polylactic acid(PLA)polymer scaffold with a precisely customized patient appearance was fabricated,and then auricle cartilage fragments were loaded into the 3D-printed porous PLA scaffold to promote auricle reconstruction.In vitro,gelatin methacrylamide(GelMA)hydrogels loaded with different sizes of rabbit ear cartilage fragments were studied to assess the regenerative activity of various autologous cartilage fragments.In vivo,rat ear cartilage fragments were placed in an accurately designed porous PLA polymer ear scaffold to promote auricle reconstruction.The results indicated that the chondrocytes in the cartilage fragments could maintain the morphological phenotype in vitro.After three months of implantation observation,it was conducive to promoting the subsequent regeneration of cartilage in vivo.The autologous cartilage fragments combined with 3D printing technology show promising potential in auricle reconstruction.

Similarity-based laboratory study of CO_(2) huff-n-puff in tight conglomerate cores

Tight conglomerate reservoirs are featured with extremely low permeability,strong heterogeneity and poor water injectivity.CO_(2) huff-n-puff has been considered a promising candidate to enhance oil recovery in tight reservoirs,owing to its advantages in reducing oil viscosity,improving mobility ratio,quickly replenishing formation pressure,and potentially achieving a miscible state.However,reliable inhouse laboratory evaluation of CO_(2) huff-n-puff in natural conglomerate cores is challenging due to the inherent high formation pressure.In this study,we put forward an equivalent method based on the similarity of the miscibility index and Grashof number to acquire a lab-controllable pressure that features the flow characteristics of CO_(2) injection in a tight conglomerate reservoir.The impacts of depletion degree,pore volume injection of CO_(2) and soaking time on ultimate oil recovery in tight cores from the Mahu conglomerate reservoir were successfully tested at an equivalent pressure.Our results showed that oil recovery decreased with increased depletion degree while exhibiting a non-monotonic tendency(first increased and then decreased)with increased CO_(2) injection volume and soaking time.The lower oil recoveries under excess CO_(2) injection and soaking time were attributed to limited CO_(2) dissolution and asphaltene precipitation.This work guides secure and reliable laboratory design of CO_(2) huff-n-puff in tight reservoirs with high formation pressure.

Out-of-plane weak ferromagnetism at room temperature in lattice-distortion non-collinear antiferromagnet of single-crystal Mn_(3)Sn

Out-of-plane weak ferromagnetic(OWFM)spin arrangements with topological properties can realize a series of interesting physical properties.However,this spin structure tends to exist at low temperatures.The OWFM structure can also be induced at room temperature by hydrostatic pressure,whereas this isotropic approach tends to form helical AFM structures.We report the OWFM spin arrangement in single crystal Mn_(3)Sn by an anisotropic strategy of high-stressconstrained compression deformation at room temperature.Both experimental and theoretical simulation results show that the alignment of the OWFM spin structure is due to the distortion of the atomic scale caused by the strain energy during deformation.The OWFM spin arrangement can significantly change the magnetic property of Mn_(3)Sn.As a result,the remanent magnetization M_(r)for the deformed sample(0.056μ_(B)/f.u.)is about eleven times that for the pre-deformed sample(0.005μ_(B)/f.u.),and the coercivity(H_(c))increases from 0 k Oe(pre-deformed sample)to 6.02 k Oe(deformed sample).Our findings provide a way to generate the OWFM spin structure at room temperature and may give fresh ideas for creating antiferromagnetic materials with excellent physical properties.

聚醚酮酮共聚物的结构表征及热分解行为

对聚醚酮酮共聚物的分子结构和热分解行为进行了详细的研究。采用红外光谱、核磁共振氢谱和核磁共振碳谱对聚醚酮酮的结构进行了分析表征,所得结果与聚合物预期分子结构相一致。由于聚醚酮酮苯环上的氢所处环境相似,化学位移相近,出现了部分峰的重叠,导致核磁共振氢谱难以准确地确定对苯和间苯的比例,但通过核磁共振碳谱可确定结构中二者的比例。通过差示扫描量热仪、热重分析和热重-红外-气质联用技术对聚醚酮酮的热分解行为进行了研究。结果表明,随着高温处理时间的延长,聚合物发生了交联,结晶能力减弱、玻璃化转变温度升高、熔点降低。与对苯/间苯的比例无关,聚醚酮酮共聚物的5%失重温度都在559~565℃之间,并且加热至800℃后仍具有较高的残碳量,说明具有较好的热稳定性。最后,对其热分解产物及分解机理进行了探究分析。

热分析联用技术及其在金属材料领域中的应用

热分析联用技术是在热重分析基础上,将多种检测手段并用,准确地研究材料的结构、组成、热反应等特性,从而揭示材料热分解过程本质的技术。在程序升温过程中,利用热分析联用技术对金属材料的质量和热量变化及热分解产物成分等信息进行检测,能更精准地研究金属材料的组成和热分解特性。该文在热重分析法的基础上,着重介绍了其与差热分析、差示扫描量热分析、傅里叶红外光谱分析、质谱分析等分析方法的联用,并以金属材料研究为例,分析了热分析联用技术在金属材料的结构、性能测定等方面的应用,同时展望了热分析联用技术的应用前景。

Inhibitory effects of saikosaponin-d on CCl_4-induced hepatic fibrogenesis in rats

AIM： To investigate the suppressive effect of saikosaponin-d （SSd） on hepatic fibrosis in rats induced by CCh injections in combination with alcohol and high fat, low protein feeding and its relationship with the expression of nuclear factor-κB （NF-κB）, tumor necrosis factor-alpha （TNF-α） and interleukins-6 （IL-6）. METHODS： Hepatic fibrosis models were induced by subcutaneous injection of CCh at a dosage of 3 mL/kg in rats. At the same time, rats in treatment groups were injected intraperitoneally with SSd at different doses （1.0, 1.5 and 2.0 mg/kg） once daily for 6 wk in combination with CCh, while the control group received olive oil instead of CCh. At the end of the experiment, rats were anesthetized and killed （except for 8 rats which died during the experiment; 2 from the model group, 3 in high-dose group, 1 in medium-dose group and 2 in lowdose group）. Hernatoxylin and eosin （HE） staining and Van Gieson staining were used to examine the changes in liver pathology. The levels of alanine aminotransferase （ALT）, triglyeride （TG）, albumin （ALB）, globulin （GLB）, hyaluronic acid （HA） and larninin （LN） in serum and the content of hydroxyproline （HYP） in liver were measured by biochemical examinations and radioimmuneoassay, respectively. In addition, the expression of TNF-α and IL-6 in liver homogenate was evaluated by enzymelinked immunosorbent assay （ELISA） and the levels of NF-κBp65 and I-κBa in liver tissue were analyzed by Western blotting. RESULTS： Both histological examination and Van Gieson staining demonstrated that SSd could attenuate the area and extent of necrosis and reduce the scores of liver fibrosis. Similarly, the levels of ALT, TG, GLB, HA, and LN in serum, and the contents of HYP, TNF-α and IL-6 in liver were all significantly increased in model group in comparison with those in control group. Whereas, the treatment with SScl markedly reduced all the above parameters compared with the model group, especially in the medium group （ALT： 412 ± 94.5 IU/L vs 113.76 ± 14.91 IU/L, TG： 0.95 ± 0.16 mmol/L vs 0.51 ± 0.06 mmol/L, GLB： 35.62 ± 3.28 g/L vs 24.82 ± 2.73 g/L, HA： 42.15 ± 8.25 ng/mL vs 19.83 ± 3.12 ng/mL, LN： 27.56 ± 4.21 ng/mL vs 13.78 ± 2.57 ng/mL, HYP： 27.32 ± 4.32 ug/mg vs 16.20 ± 3.12 ug/mg, TNF-a： 4.38 ± 0.76 ng/L vs 1.94 ± 0.27 ng/L, IL-6：28.24 ± 6.37 pg/g vs 12.72 ± 5.26 pg/g, respectively, P 〈 0.01）. SSd also decreased ALB in serum （28.49 ± 4.93 g/L vs 37.51 ± 3.17 g/L, P 〈 0.05）. Moreover, the expression of NF-KB p65 in the liver of treated groups was lower than that in model groups while the expression of I-κBa was higher in treated group than in model group （P 〈 0.01）. The expression of NF-κBp65 and TNF-a had a positive correlation with the level of HA in serum of rats after treatment with CCh （r = 0.862, P 〈 0.01; r = 0.928, P 〈 0.01, respectively）. CONCLUSION： SSd attenuates CCh-induced hepatic fibrosis in rats, which may be related to its effects of hepato-protective and anti-inflammation properties, the down-regulation of liver TNF-a, IL-6 and NF-κBp65 expression and the increased I-κBa activity in liver.

Endoscopic Surgery versus External Ventricular Drainage Surgery for Severe Intraventricular Hemorrhage

The efficacy and applied value of endoscopic hematoma evacuation vs. external ventricular drainage (EVD) in the treatment of severe ventficular hemorrhage (IVH) were explored and compared.From Jan.2015 to Dec.2016,the clinical data of 42 cases of IVH were retrospectively analyzed,including 18 patients undergoing endoscopic hematoma evacuation (group A),and 24patients receiving EVD (group B).The hematoma clearance rate was calculated by 3D Slicer software,and complications and outcomes were compared between the two groups.There were no significant differences in age,sex and Graeb score between groups A and B (P>0.05).The hematoma clearance rate was 70.81%±27.64% in group A and 48.72%±36.58% in group B with a statistically significant difference (P<0.05).The operative time in groups A and B was 72.45±25.26 min and 28.54±15.27min,respectively (P<0.05).The Glasgow Coma Scale (GCS) score increased from 9.28±2.72 at baseline to 11.83±2.91 at 1 week postoperatively in group A,and from 8.25±2.62 at baseline to 10.79±4.12 at 1 week postoperatively in group B (P<0.05).The length of hospital stay was 12.67±5.97 days in group A and 17.33±8.91 days in group B with a statistically significant difference (P<0.05).The GOS scores at 6 months after surgery were 3.83±1.12 in group A,and 2.75±1.23 in group B (P<0.05). These results suggested that endoscopic hematoma evacuation has an advantage of a higher hematoma clearance rate,fewer complications and better outcomes in the treatment of severe IVH,indicating it is a safe,effective and promising approach for severe IVH.

Lightweight,Flexible Cellulose-Derived Carbon Aerogel@Reduced Graphene Oxide/PDMS Composites with Outstanding EMI Shielding Performances and Excellent Thermal Conductivities

In order to ensure the operational reliability and infor-mation security of sophisticated electronic components and to protect human health,efficient electromagnetic interference(EMI)shielding materials are required to attenuate electromagnetic wave energy.In this work,the cellulose solution is obtained by dissolving cotton through hydrogen bond driving self-assembly using sodium hydroxide(NaOH)/urea solution,and cellulose aerogels(CA)are prepared by gelation and freeze-drying.Then,the cellulose carbon aerogel@reduced graphene oxide aerogels(CCA@rGO)are prepared by vacuum impregnation,freeze-drying followed by thermal annealing,and finally,the CCA@rGO/polydimethylsiloxane(PDMS)EMI shielding composites are prepared by backfilling with PDMS.Owing to skin-core structure of CCA@rGO,the complete three-dimensional(3D)double-layer con-ductive network can be successfully constructed.When the loading of CCA@rGO is 3.05 wt%,CCA@rGO/PDMS EMI shielding composites have an excellent EMI shielding effectiveness(EMI SE)of 51 dB,which is 3.9 times higher than that of the co-blended CCA/rGO/PDMS EMI shielding composites(13 dB)with the same loading of fillers.At this time,the CCA@rGO/PDMS EMI shielding composites have excellent thermal stability(T_(HRI) of 178.3℃)and good thermal conductivity coefficient(λ of 0.65 W m^(-1) K^(-1)).Excellent comprehensive performance makes CCA@rGO/PDMS EMI shielding composites great prospect for applications in lightweight,flexible EMI shielding composites.

Inhibitory effect of emodin and Astragalus polysaccharide on the replication of HBV

AIM: To evaluate the anti-viral effect of emodin plus Astragalus polysaccharide (APS) in hepatitis B virus (HBV) transgenic mice.METHODS: Sixty HBV transgenic mice (HBV TGM) whose weight varied between 18 and 24 g were randomly divided into 3 groups, with 20 mice in each group. Group A was the normal control, where the mice were treated with physiological saline; group B was the positive control where the mice were treated with lamivudine solution (100 mL/kg per day). Group C was the experimental group where the mice were treated with physiological saline containing emodin and APS (57.59 mg/kg per day and 287.95 mg/kg per day, respectively). The mice were treated daily for 3 wk. After 1 wk recovery time, the mice were sacrifi ced and serum as well as liver tissues were collected for ELISA and histological examination.RESULTS: After 21 d treatment, HBV DNA levels in group B and group C significantly declined when compared with group A (P < 0.05). However, a signif icant increase in HBV DNA content was observed in group B, whereas this phenomenon was not observed in group C. A reduction in the contents of HBsAg, HBeAg and HBcAg in the mice from group B and C was observed when compared with group A.CONCLUSION: Emodin and APS have a weak but persistent inhibitory effect on HBV replication in vivo, which may function as a supplementary modality in the treatment of hepatitis B infection.

High-Efficiency Electromagnetic Interference Shielding of rGO@FeNi/Epoxy Composites with Regular Honeycomb Structures

With the rapid development of fifth-generation mobile com-munication technology and wearable electronic devices,electromagnetic interference and radiation pollution caused by electromagnetic waves have attracted worldwide attention.Therefore,the design and development of highly efficient EMI shielding materials are of great importance.In this work,the three-dimensional graphene oxide(GO)with regular honeycomb structure(GH)is firstly constructed by sacrificial template and freeze-dry-ing methods.Then,the amino functionalized FeNi alloy particles(f-FeNi)are loaded on the GH skeleton followed by in-situ reduction to prepare rGH@FeNi aerogel.Finally,the rGH@FeNi/epoxy EMI shielding com-posites with regular honeycomb structure is obtained by vacuum-assisted impregnation of epoxy resin.Benefitting from the construction of regular honeycomb structure and electromagnetic synergistic effect,the rGH@FeNi/epoxy composites with a low rGH@FeNi mass fraction of 2.1 wt%(rGH and f-FeNi are 1.2 and 0.9 wt%,respectively)exhibit a high EMI shielding effectiveness(EMI SE)of 46 dB,which is 5.8 times of that(8 dB)for rGO/FeNi/epoxy composites with the same rGO/FeNi mass fraction.At the same time,the rGH@FeNi/epoxy composites also possess excellent thermal stability(heat-resistance index and temperature at the maximum decomposition rate are 179.1 and 389.0°C respectively)and mechanical properties(storage modulus is 8296.2 MPa).

Tuning strategies and structure effects of electrocatalysts for carbon dioxide reduction reaction

Carbon dioxide emissions have increased due to the consumption of fossil fuels,making the neutralization and utilization of CO_(2) a pressing issue.As a clean and efficient energy conversion process,electrocatalytic reduction can reduce carbon dioxide into a series of alcohols and acidic organic molecules,which can effectively realize the utilization and transformation of carbon dioxide.This review focuses on the tuning strategies and structure effects of catalysts for the electrocatalytic CO_(2) reduction reaction(CO_(2)RR).The tuning strategies for the active sites of catalysts have been reviewed from intrinsic and external perspectives.The structure effects for the CO_(2)RR catalysts have also been discussed,such as tandem catalysis,synergistic effects and confinement catalysis.We expect that this review about tuning strategies and structure effects can provide guidance for designing highly efficient CO_(2)RR electrocatalysts.

Correlation between resilience and social support and anxiety in obstetric nurses

Objective: The aim of this study was to explore the correlation between psychological resilience and social support and anxiety in obstetric nurses and to provide theoretical basis for improving the mental health of obstetric nurses.Methods: In this study, 190 obstetric nurses were included, using the general information questionnaire and The Connor-Davidson Resilience Scale(CD-RISC), Social Support Rating Scale, and survey of Self-evaluation of Anxiety Scale.Results: There are differences in the type of work and the score of psychological resilience(P<0.05), obstetric nurses’ resilience score was 65.58±10.65; self-rating anxiety score of obstetric nurses was 36.89±6.87; and social support score of obstetric nurses was44.3717.86. The psychological elasticity score and anxiety were negatively related(P<0.01), whereas the resilience score and total score of social support were positively related(P<0.01).Conclusions: Obstetric nurses have many responsibilities and stress. Nursing managers should focus on obstetric nurses’ mental health, lighten the obstetric nurses’ anxiety, and thus improve their mental flexibility and optimize the quality of nursing service better,with more passion into work.

Modulation of the cutoff wavelength in the spectra for solar selective absorbing coating based on high-entropy films

This paper demonstrates an intrinsic modulation of the cutoff wavelength in the spectra for solar selective absorbing coating based on high-entropy films.The(NiCuCrFeSi)N((NCCFS)N)films were deposited by a magnetron sputtering system.Rutherford backscattering spectroscopy analysis confirms the uniform composition and good homogeneity of these high-entropy films.The real and imaginary parts of the permittivity for the(NCCFS)N material are calculated on the basis of the reflectance spectral fitting results.A redshift cutoff wavelength of the reflectance spectrum with increasing nitrogen gas flow rate exists because of the different levels of dispersion when changing nitrogen content.To realize significant solar absorption,the film surface was reconstituted to match its impedance with air by designing a pyramid nanostructure metasurface.Compared with the absorptance of the as-deposited films,the designed metasurface obtains a significant improvement in solar absorption with the absorptance increasing from 0.74 to 0.99.The metasurfaces also show low mid-infrared emissions with thermal emittance that can be as low as 0.06.These results demonstrate a new idea in the design of solar selective absorbing surface with controllable absorptance and low infrared emission for high-efficiency photo-thermal conversion.

Meta-analysis of commercial Pt/C measurements for oxygen reduction reactions via data mining

The rotating disk electrode technique is commonly used for screening and characterizing the performance of electrocatalysts for the oxygen reduction reaction(ORR).However,a reliable performance comparison of different electrocatalysts from different labs remains a challenge because of the inconsistency in the measurement of commercial Pt/C.Commercial Pt/C has been adopted extensively as a reference for evaluating the ORR performance of a new electrocatalyst.However,the reported ORR performances of commercial Pt/C from different labs could be significantly different because of multiple factors.Herein,we conducted a meta‐analysis of the ORR performance of commercial Pt/C via data mining of the literature.This revealed the optimal testing conditions for the most repeatable ORR performance,with commercial Pt/C in both acid and alkaline electrolytes;the optimal Pt loading was 20μg/cm^(2) on a 4 mm glassy carbon working electrode.The value of 0.84±0.03 V was suggested as the“Golden reference”of the commercial Pt/C(with Pt 20 wt%)ORR half‐wave potential for the performance evaluation of other ORR catalysts in both acid and alkaline electrolytes.The conclusion obtained through the meta‐analysis was confirmed by experiments.This study provides general guidance for a reliable measurement of the ORR performance of commercial Pt/C as a reference.