Circulating fluidized bed combustion （CFBC） ash exhibits the desirable pozzolanic activity which makes it a potential supplementary cementitious material to replace cement for concrete production. However, the high ...Circulating fluidized bed combustion （CFBC） ash exhibits the desirable pozzolanic activity which makes it a potential supplementary cementitious material to replace cement for concrete production. However, the high unburnt carbon content and porous surface structure of CFBC ash may adsorb water reducer and thereby significantly reduce the efficiency of water-reducing agents. The adsorption mechanism of polycarboxylate superplasticizer in CFBC ash-Portland cement paste was investigated by ultraviolet-visible spectrophotometer, and the conception of ＂invalid adsorption site＂ of CFBC ash was presented. The results show that the adsorption behavior of polycarboxylate superplasticizer in coal ash-Portland cement paste can be described by Langmuir isothermal adsorption equation. The adsorption capacity of CFBC ash-Portland cement paste is higher than that of pulverized coal combustion （PCC） fly ash-Portland cement paste. Moreover, the adsorption amount of polycarboxylate superplasticizer increases with the ratio of ash-to-cement in the paste. At last, the fluidity of CFBC ash-Portland cement paste is lower than that of the PCC fly ash paste. This work suggests that when CFBC ash is used as concrete admixture, the poor flowability of the cementitious system due to the high adsorption of water and water-reducing agent should be taken into consideration.展开更多
Circulating fluidized bed combustion （CFBC） ash can be used as supplementary cementitious material for concrete production for its high pozzolanic activity. We investigated the effect of curing conditions on the hyd...Circulating fluidized bed combustion （CFBC） ash can be used as supplementary cementitious material for concrete production for its high pozzolanic activity. We investigated the effect of curing conditions on the hydration and performance of CFBC ash-Portland cement system （30： 70, by mass） including hydration products, paste microstructure, linear expansion ratio, chemically combined water content and compressive strength. The results show that tobermorite rather than ettringite is generated under the condition of autoclaved curing. The expansion and mortar strength of the system cured in water is higher than those cured in air at a given age, and the strength and bulk volume may retract under the condition of air curing. In addition, autoclaved curing facilitates the increase of strength gain at early curing ages （the increase rate lowers down in the following ages） and the improvement of system volume stability. It is suggested that sufficient water is necessary for the curing of CFBC ash cementitious system, and autoclaved curing may be considered where volume stability is a primary concern.展开更多
Phosphogypsum（PG） calcined at 500 ℃ was activated by K2SO4 and salt lime with loose structure as seed crystal. To determine the effect of activation, hydration of the anhydrate PG activated was investigated by exam...Phosphogypsum（PG） calcined at 500 ℃ was activated by K2SO4 and salt lime with loose structure as seed crystal. To determine the effect of activation, hydration of the anhydrate PG activated was investigated by examination of the setting time, the proportion of hydrated anhydrate PG, the microstructure of the hardenite and the resistance to water. Results show that activated anhydrate PG hydrates much more rapidly than that in the absence of activators. The activated anhydrate PG has proper setting time and hydrated proportion. The resistance to water was greatly improved. SEM photos show that the set activated PG has hydrated products of rod-like and closely connected crystals. The different addition of activator leads to different compact structure.展开更多
We prepared concretes（RC0, RC30, and RC100） with three different mixes. The poresize distribution parameters of RAC were examined by high-precision mercury intrusion method（MIM） and nuclear magnetic resonance（NMR...We prepared concretes（RC0, RC30, and RC100） with three different mixes. The poresize distribution parameters of RAC were examined by high-precision mercury intrusion method（MIM） and nuclear magnetic resonance（NMR） imaging. A capillary-bundle physical model with random-distribution pores（improved model, IM） was established according to the parameters, and dry-shrinkage strain values were calculated and verified. Results show that in all pore types, capillary pores, and gel pores have the greatest impacts on concrete shrinkage, especially for pores 2.5-50 and 50-100 nm in size. The median radii are 34.2, 31, and 34 nm for RC0, RC30, and RC100, respectively. Moreover, the internal micropore size distribution of RC0 differs from that of RC30 and RC100, and the pore descriptions of MIM and NMR are consistent both in theory and in practice. Compared with the traditional capillary-bundle model, the calculated results of IM have higher accuracy as demonstrated by experimental verifi cation.展开更多
Due to the intrinsic nature of a heterogeneous and anisotropic microstructure of cement based materials and the small indentation size, the measured microhardness values are subject to considerable variability. This w...Due to the intrinsic nature of a heterogeneous and anisotropic microstructure of cement based materials and the small indentation size, the measured microhardness values are subject to considerable variability. This work presents an in-depth assessment of microhardness of hardened cement pastes（HCPs） from a statistical perspective. Hundreds of microhardness measurements were conducted on an HCP sample using a Vickers Microhardness Tester. The results showed that the microhardness measured from the HCP sample significantly scattered with a large standard deviation, varying from tens to hundreds. The data-set of microhardness values was not normally distributed but fit best with a three-parameter lognormal model. By using a statistical software, the probability density function of the microhardness distribution can be readily obtained. The arithmetic mean and its 95% confidence intervals of the measured microhardness values can be used to best represent the microhardness characteristics of HCPs.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.51132010 and 51272222)the Programs for Science and Technology Development of Yantai City,Shandong Province,China(No.2012ZH249)
文摘Circulating fluidized bed combustion （CFBC） ash exhibits the desirable pozzolanic activity which makes it a potential supplementary cementitious material to replace cement for concrete production. However, the high unburnt carbon content and porous surface structure of CFBC ash may adsorb water reducer and thereby significantly reduce the efficiency of water-reducing agents. The adsorption mechanism of polycarboxylate superplasticizer in CFBC ash-Portland cement paste was investigated by ultraviolet-visible spectrophotometer, and the conception of ＂invalid adsorption site＂ of CFBC ash was presented. The results show that the adsorption behavior of polycarboxylate superplasticizer in coal ash-Portland cement paste can be described by Langmuir isothermal adsorption equation. The adsorption capacity of CFBC ash-Portland cement paste is higher than that of pulverized coal combustion （PCC） fly ash-Portland cement paste. Moreover, the adsorption amount of polycarboxylate superplasticizer increases with the ratio of ash-to-cement in the paste. At last, the fluidity of CFBC ash-Portland cement paste is lower than that of the PCC fly ash paste. This work suggests that when CFBC ash is used as concrete admixture, the poor flowability of the cementitious system due to the high adsorption of water and water-reducing agent should be taken into consideration.
基金Funded by the National Natural Science Foundation of China(Nos.51132010 and 51272222)the Programs for Science and Technology Development of Yantai City,Shandong Province,China(No.2012ZH249)
文摘Circulating fluidized bed combustion （CFBC） ash can be used as supplementary cementitious material for concrete production for its high pozzolanic activity. We investigated the effect of curing conditions on the hydration and performance of CFBC ash-Portland cement system （30： 70, by mass） including hydration products, paste microstructure, linear expansion ratio, chemically combined water content and compressive strength. The results show that tobermorite rather than ettringite is generated under the condition of autoclaved curing. The expansion and mortar strength of the system cured in water is higher than those cured in air at a given age, and the strength and bulk volume may retract under the condition of air curing. In addition, autoclaved curing facilitates the increase of strength gain at early curing ages （the increase rate lowers down in the following ages） and the improvement of system volume stability. It is suggested that sufficient water is necessary for the curing of CFBC ash cementitious system, and autoclaved curing may be considered where volume stability is a primary concern.
基金Funded by the National Natural Science Foundation of China(No.50802019)
文摘Phosphogypsum（PG） calcined at 500 ℃ was activated by K2SO4 and salt lime with loose structure as seed crystal. To determine the effect of activation, hydration of the anhydrate PG activated was investigated by examination of the setting time, the proportion of hydrated anhydrate PG, the microstructure of the hardenite and the resistance to water. Results show that activated anhydrate PG hydrates much more rapidly than that in the absence of activators. The activated anhydrate PG has proper setting time and hydrated proportion. The resistance to water was greatly improved. SEM photos show that the set activated PG has hydrated products of rod-like and closely connected crystals. The different addition of activator leads to different compact structure.
基金Funded by the National Natural Science Foundation of China(51202304)the China Postdoctoral Science Foundation(2014M552320)+1 种基金Scientific,the Technological Talents’Special Funds of Wanzhou District and Scientific and Technological Research Program of Chongqing Municipal Education Commission(KJ1401016)the Youth Project of Chongqing Three Gorges College(13QN-20)
文摘We prepared concretes（RC0, RC30, and RC100） with three different mixes. The poresize distribution parameters of RAC were examined by high-precision mercury intrusion method（MIM） and nuclear magnetic resonance（NMR） imaging. A capillary-bundle physical model with random-distribution pores（improved model, IM） was established according to the parameters, and dry-shrinkage strain values were calculated and verified. Results show that in all pore types, capillary pores, and gel pores have the greatest impacts on concrete shrinkage, especially for pores 2.5-50 and 50-100 nm in size. The median radii are 34.2, 31, and 34 nm for RC0, RC30, and RC100, respectively. Moreover, the internal micropore size distribution of RC0 differs from that of RC30 and RC100, and the pore descriptions of MIM and NMR are consistent both in theory and in practice. Compared with the traditional capillary-bundle model, the calculated results of IM have higher accuracy as demonstrated by experimental verifi cation.
基金the National Natural Science Foundation of China(Nos.51302191 and 51132010)
文摘Due to the intrinsic nature of a heterogeneous and anisotropic microstructure of cement based materials and the small indentation size, the measured microhardness values are subject to considerable variability. This work presents an in-depth assessment of microhardness of hardened cement pastes（HCPs） from a statistical perspective. Hundreds of microhardness measurements were conducted on an HCP sample using a Vickers Microhardness Tester. The results showed that the microhardness measured from the HCP sample significantly scattered with a large standard deviation, varying from tens to hundreds. The data-set of microhardness values was not normally distributed but fit best with a three-parameter lognormal model. By using a statistical software, the probability density function of the microhardness distribution can be readily obtained. The arithmetic mean and its 95% confidence intervals of the measured microhardness values can be used to best represent the microhardness characteristics of HCPs.
