在室温条件下,对AZ31镁合金挤压棒材进行循环扭转变形,测试了扭转变形过程的力学性能以及变形后的微观组织和织构特征,并对扭转变形对镁合金棒材的力学性能影响进行了分析。结果表明:镁合金棒材在循环扭转过程中得到了严格对称的应力-...在室温条件下,对AZ31镁合金挤压棒材进行循环扭转变形,测试了扭转变形过程的力学性能以及变形后的微观组织和织构特征,并对扭转变形对镁合金棒材的力学性能影响进行了分析。结果表明:镁合金棒材在循环扭转过程中得到了严格对称的应力-应变滞回线,并且随着循环周期的增加,由于加工硬化和内部微裂纹扩展的共同影响,应力-应变滞回线上的应力峰值呈现先增加后减小的特征。在最大扭转角分别为60°和90°条件下,应力峰值出现在第四周期。镁合金棒材扭转变形后的晶粒中出现大量的拉伸孪晶带,孪晶启动使晶粒的 C 轴转向棒材轴线方向。镁合金棒材扭转变形后的力学性能测试结果显示,循环扭转变形明显提高了镁合金棒材压缩变形的屈服强度,其值由扭转前的约100MPa最大提高至约200MPa。展开更多
The carburizing process of the gear ring was simulated by taking into account the practical carburizing and quenching techniques of the gear ring and by solving the diffusion equation. The carbon content distribution ...The carburizing process of the gear ring was simulated by taking into account the practical carburizing and quenching techniques of the gear ring and by solving the diffusion equation. The carbon content distribution in the carburized layer was obtained. Based on the results, the quenching process of the gear ring was then simulated using the metallic thermodynamics and FEM： it was found that the carburization remarkably affects the quenching process. Microstructures and stress distributions of the gear ring in the quenching process were simulated, and the results are confirmed by experiments.展开更多
The texture evolution,twin crystallographic nature and grain orientation variation during the solution heat treatment process of the 304 stainless steel pipe were studied.It was found that after the solution heat trea...The texture evolution,twin crystallographic nature and grain orientation variation during the solution heat treatment process of the 304 stainless steel pipe were studied.It was found that after the solution heat treatment,the texture type clearly changed,and the texture strength was greatly increased.During the solution heat treatment process,grain boundaries migrated along the orientation available for grain growth,giving rise to abnormal growth of some grains through merging with the adjacent small grains.After the solution heat treatment,more<111>60°twins formed in the microstructures of the 304 stainless steel pipe,and the fraction of the twin boundaries showed a pronounced increase.Analysis of the twin crystallographic nature of the FCC crystals showed that four kinds of twin variants can be formed within austenite parent grains,and twelve kinds of misorientations can be formed between the austenite parent grains and the secondary twins.展开更多
文摘在室温条件下,对AZ31镁合金挤压棒材进行循环扭转变形,测试了扭转变形过程的力学性能以及变形后的微观组织和织构特征,并对扭转变形对镁合金棒材的力学性能影响进行了分析。结果表明:镁合金棒材在循环扭转过程中得到了严格对称的应力-应变滞回线,并且随着循环周期的增加,由于加工硬化和内部微裂纹扩展的共同影响,应力-应变滞回线上的应力峰值呈现先增加后减小的特征。在最大扭转角分别为60°和90°条件下,应力峰值出现在第四周期。镁合金棒材扭转变形后的晶粒中出现大量的拉伸孪晶带,孪晶启动使晶粒的 C 轴转向棒材轴线方向。镁合金棒材扭转变形后的力学性能测试结果显示,循环扭转变形明显提高了镁合金棒材压缩变形的屈服强度,其值由扭转前的约100MPa最大提高至约200MPa。
基金Item Sponsored by National Basic Research Programof China (G2000067208-4)
文摘The carburizing process of the gear ring was simulated by taking into account the practical carburizing and quenching techniques of the gear ring and by solving the diffusion equation. The carbon content distribution in the carburized layer was obtained. Based on the results, the quenching process of the gear ring was then simulated using the metallic thermodynamics and FEM： it was found that the carburization remarkably affects the quenching process. Microstructures and stress distributions of the gear ring in the quenching process were simulated, and the results are confirmed by experiments.
基金Project(51875547)supported by the National Natural Science Foundation of China。
文摘The texture evolution,twin crystallographic nature and grain orientation variation during the solution heat treatment process of the 304 stainless steel pipe were studied.It was found that after the solution heat treatment,the texture type clearly changed,and the texture strength was greatly increased.During the solution heat treatment process,grain boundaries migrated along the orientation available for grain growth,giving rise to abnormal growth of some grains through merging with the adjacent small grains.After the solution heat treatment,more<111>60°twins formed in the microstructures of the 304 stainless steel pipe,and the fraction of the twin boundaries showed a pronounced increase.Analysis of the twin crystallographic nature of the FCC crystals showed that four kinds of twin variants can be formed within austenite parent grains,and twelve kinds of misorientations can be formed between the austenite parent grains and the secondary twins.
