In view of complex geological characteristics and alternating loading conditions associated with cyclic large amount of gas injection and withdrawal in underground gas storage(UGS) of China, a series of key gas storag...In view of complex geological characteristics and alternating loading conditions associated with cyclic large amount of gas injection and withdrawal in underground gas storage(UGS) of China, a series of key gas storage construction technologies were established, mainly including UGS site selection and evaluation, key index design, well drilling and completion, surface engineering and operational risk warning and assessment, etc. The effect of field application was discussed and summarized. Firstly, trap dynamic sealing capacity evaluation technology for conversion of UGS from the fault depleted or partially depleted gas reservoirs. A key index design method mainly based on the effective gas storage capacity design for water flooded heterogeneous gas reservoirs was proposed. To effectively guide the engineering construction of UGS, the safe well drilling, high quality cementing and high pressure and large flow surface injection and production engineering optimization suitable for long-term alternate loading condition and ultra-deep and ultra-low temperature formation were developed. The core surface equipment like high pressure gas injection compressor can be manufactured by our own. Last, the full-system operational risk warning and assessment technology for UGS was set up. The above 5 key technologies have been utilized in site selection, development scheme design, engineering construction and annual operations of 6 UGS groups, e.g. the Hutubi UGS in Xinjiang. To date, designed main indexes are highly consistent with actural performance, the 6 UGS groups have the load capacity of over 7.5 billion cubic meters of working gas volume and all the storage facilities have been running efficiently and safely.展开更多
By conducting relative permeability experiments of multi-cycle gas-water displacement and imbibition on natural cores,we discuss relative permeability hysteresis effect in underground gas storage during multi-cycle in...By conducting relative permeability experiments of multi-cycle gas-water displacement and imbibition on natural cores,we discuss relative permeability hysteresis effect in underground gas storage during multi-cycle injection and production.A correction method for relative permeability hysteresis in numerical simulation of water-invaded gas storage has been worked out using the Carlson and Killough models.A geologic model of water-invaded sandstone gas storage with medium-low permeability is built to investigate the impacts of relative permeability hysteresis on fluid distribution and production performance during multi-cycle injection and production of the gas storage.The study shows that relative permeability hysteresis effect occurs during high-speed injection and production in gas storage converted from water-invaded gas reservoir,and leads to increase of gas-water transition zone width and thickness,shrinkage of the area of high-efficiency gas storage,and decrease of the peak value variation of pore volume containing gas,and then reduces the storage capacity,working gas volume,and high-efficiency operation span of the gas storage.Numerical simulations exhibit large prediction errors of performance indexes if this hysteresis effect is not considered.Killough and Carlson methods can be used to correct the relative permeability hysteresis effect in water-invaded underground gas storage to improve the prediction accuracy.The Killough method has better adaptability to the example model.展开更多
针对在医院室内非视距环境中,多径现象明显、测距误差较大的问题,本文基于超宽带技术(Ultra-wideband,UWB)功耗低、多径分辨率高、测距精度高等优点,研究了位置指纹法的定位原理与NN指纹定位法及其改进算法。实验采用基于飞行时间(Time ...针对在医院室内非视距环境中,多径现象明显、测距误差较大的问题,本文基于超宽带技术(Ultra-wideband,UWB)功耗低、多径分辨率高、测距精度高等优点,研究了位置指纹法的定位原理与NN指纹定位法及其改进算法。实验采用基于飞行时间(Time of Fight,TOF)测距数据作为指纹建立数据库,分别研究了NN算法和WKNN的定位性能,并进行误差分析。结果表明两种算法均能达到厘米级的定位精度,且WKNN算法相对NN算法的定位误差改善了18.09%,提高了在非视距环境中定位的精确度和稳健性。展开更多
On the basis of analyzing the fluid phase behavior during the transformation from gas reservoir to gas storage,a mathematical model and an experimental simulation method are established to describe the oil-gas phase b...On the basis of analyzing the fluid phase behavior during the transformation from gas reservoir to gas storage,a mathematical model and an experimental simulation method are established to describe the oil-gas phase behavior during the whole injection-production process of gas storage.The underground gas storage in the Liaohe Shuang 6 gas reservoir with oil rim is taken as a typical example to verify the reliability and accuracy of the mathematical model and reveal characteristics and mechanisms of fluid phase behavior.In the gas injection stage of the gas storage,the phase behavior is characterized by mainly evaporation and extraction and secondarily dissolution and diffusion of gas in the cap to oil in the oil rim of the reservoir;the gas in gas cap increases in light component content,decreases in contents of intermediate and heavy components,and increases in density and viscosity.The oil of the ring decreases in content of heavy components,increases in contents of light and intermediate components,decreases in density and viscosity,and increases in volume factor and solution gas oil ratio.In the stable operation stage of periodic injection-production of gas storage,the phase behavior shows that the evaporation and extraction capacity of injection gas in the cap to oil rim is weakened step by step,the phase behavior gradually changes into dissolution and diffusion.The gas in gas cap decreases in content of intermediate components,increases in content of light components slowly,and becomes lighter;but changes hardly in density and viscosity.The oil in the oil rim increases in content of heavy components,decreases in content of intermediate components,rises in density and viscosity,and drops in volume factor and solution gas oil ratio.展开更多
A dynamic transient flow analysis method considering complex factors such as the cyclic injection and production history in a gas field storage facility was established in view of the limitations of the existing metho...A dynamic transient flow analysis method considering complex factors such as the cyclic injection and production history in a gas field storage facility was established in view of the limitations of the existing methods for transient flow analysis and the characteristics of the injection-production operation of strongly heterogeneous gas reservoirs, and the corresponding theoretical charts were drawn. In addition, an injection-production dynamic transient flow analysis model named "three points and two stages" suitable for an underground gas storage(UGS) well with alternate working conditions was proposed. The "three points" refer to three time points during cyclic injection and production, namely, the starting point of gas injection for UGS construction, the beginning and ending points of the injection-production analysis stage;and the "two stages" refer to historical flow stage and injection-production analysis stage. The study shows that the dimensionless pseudo-pressure and dimensionless pseudo-pressure integral curves of UGS well flex downward in the early stage of the injection and production process, and the dimensionless pseudo-pressure integral derivative curve is convex during the gas production period and concave during the gas injection period, and the curves under different flow histories have atypical features. The new method present in this paper can analyze transient flow of UGS accurately. The application of this method to typical wells in Hutubi gas storage shows that the new method can fit the pressure history accurately, and obtain reliable parameters and results.展开更多
基金Supported by the CNPC Science and Technology Major Project(2015E-4002)
文摘In view of complex geological characteristics and alternating loading conditions associated with cyclic large amount of gas injection and withdrawal in underground gas storage(UGS) of China, a series of key gas storage construction technologies were established, mainly including UGS site selection and evaluation, key index design, well drilling and completion, surface engineering and operational risk warning and assessment, etc. The effect of field application was discussed and summarized. Firstly, trap dynamic sealing capacity evaluation technology for conversion of UGS from the fault depleted or partially depleted gas reservoirs. A key index design method mainly based on the effective gas storage capacity design for water flooded heterogeneous gas reservoirs was proposed. To effectively guide the engineering construction of UGS, the safe well drilling, high quality cementing and high pressure and large flow surface injection and production engineering optimization suitable for long-term alternate loading condition and ultra-deep and ultra-low temperature formation were developed. The core surface equipment like high pressure gas injection compressor can be manufactured by our own. Last, the full-system operational risk warning and assessment technology for UGS was set up. The above 5 key technologies have been utilized in site selection, development scheme design, engineering construction and annual operations of 6 UGS groups, e.g. the Hutubi UGS in Xinjiang. To date, designed main indexes are highly consistent with actural performance, the 6 UGS groups have the load capacity of over 7.5 billion cubic meters of working gas volume and all the storage facilities have been running efficiently and safely.
基金Supported by the Petro China Science and Technology Major Project(2015E-4002)。
文摘By conducting relative permeability experiments of multi-cycle gas-water displacement and imbibition on natural cores,we discuss relative permeability hysteresis effect in underground gas storage during multi-cycle injection and production.A correction method for relative permeability hysteresis in numerical simulation of water-invaded gas storage has been worked out using the Carlson and Killough models.A geologic model of water-invaded sandstone gas storage with medium-low permeability is built to investigate the impacts of relative permeability hysteresis on fluid distribution and production performance during multi-cycle injection and production of the gas storage.The study shows that relative permeability hysteresis effect occurs during high-speed injection and production in gas storage converted from water-invaded gas reservoir,and leads to increase of gas-water transition zone width and thickness,shrinkage of the area of high-efficiency gas storage,and decrease of the peak value variation of pore volume containing gas,and then reduces the storage capacity,working gas volume,and high-efficiency operation span of the gas storage.Numerical simulations exhibit large prediction errors of performance indexes if this hysteresis effect is not considered.Killough and Carlson methods can be used to correct the relative permeability hysteresis effect in water-invaded underground gas storage to improve the prediction accuracy.The Killough method has better adaptability to the example model.
文摘针对在医院室内非视距环境中,多径现象明显、测距误差较大的问题,本文基于超宽带技术(Ultra-wideband,UWB)功耗低、多径分辨率高、测距精度高等优点,研究了位置指纹法的定位原理与NN指纹定位法及其改进算法。实验采用基于飞行时间(Time of Fight,TOF)测距数据作为指纹建立数据库,分别研究了NN算法和WKNN的定位性能,并进行误差分析。结果表明两种算法均能达到厘米级的定位精度,且WKNN算法相对NN算法的定位误差改善了18.09%,提高了在非视距环境中定位的精确度和稳健性。
基金Supported by Scientific Research and Technology Development Project of PetroChina(KT2019-02-04,2021DJ1001).
文摘On the basis of analyzing the fluid phase behavior during the transformation from gas reservoir to gas storage,a mathematical model and an experimental simulation method are established to describe the oil-gas phase behavior during the whole injection-production process of gas storage.The underground gas storage in the Liaohe Shuang 6 gas reservoir with oil rim is taken as a typical example to verify the reliability and accuracy of the mathematical model and reveal characteristics and mechanisms of fluid phase behavior.In the gas injection stage of the gas storage,the phase behavior is characterized by mainly evaporation and extraction and secondarily dissolution and diffusion of gas in the cap to oil in the oil rim of the reservoir;the gas in gas cap increases in light component content,decreases in contents of intermediate and heavy components,and increases in density and viscosity.The oil of the ring decreases in content of heavy components,increases in contents of light and intermediate components,decreases in density and viscosity,and increases in volume factor and solution gas oil ratio.In the stable operation stage of periodic injection-production of gas storage,the phase behavior shows that the evaporation and extraction capacity of injection gas in the cap to oil rim is weakened step by step,the phase behavior gradually changes into dissolution and diffusion.The gas in gas cap decreases in content of intermediate components,increases in content of light components slowly,and becomes lighter;but changes hardly in density and viscosity.The oil in the oil rim increases in content of heavy components,decreases in content of intermediate components,rises in density and viscosity,and drops in volume factor and solution gas oil ratio.
基金Supported by the CNPC Major Scientific and Technological Project(2019B-3204)PetroChina Major Scientific and Technological Project(kt2020-16-01)。
文摘A dynamic transient flow analysis method considering complex factors such as the cyclic injection and production history in a gas field storage facility was established in view of the limitations of the existing methods for transient flow analysis and the characteristics of the injection-production operation of strongly heterogeneous gas reservoirs, and the corresponding theoretical charts were drawn. In addition, an injection-production dynamic transient flow analysis model named "three points and two stages" suitable for an underground gas storage(UGS) well with alternate working conditions was proposed. The "three points" refer to three time points during cyclic injection and production, namely, the starting point of gas injection for UGS construction, the beginning and ending points of the injection-production analysis stage;and the "two stages" refer to historical flow stage and injection-production analysis stage. The study shows that the dimensionless pseudo-pressure and dimensionless pseudo-pressure integral curves of UGS well flex downward in the early stage of the injection and production process, and the dimensionless pseudo-pressure integral derivative curve is convex during the gas production period and concave during the gas injection period, and the curves under different flow histories have atypical features. The new method present in this paper can analyze transient flow of UGS accurately. The application of this method to typical wells in Hutubi gas storage shows that the new method can fit the pressure history accurately, and obtain reliable parameters and results.
