The effects of chitosan inhibitor on the corrosion behavior of 2205 duplex stainless steel were studied by electrochemical measurements, immersion tests, and stereology microscopy. The influences of immersion time, te...The effects of chitosan inhibitor on the corrosion behavior of 2205 duplex stainless steel were studied by electrochemical measurements, immersion tests, and stereology microscopy. The influences of immersion time, temperature, and chitosan concentration on the corrosion inhibition performance of chitosan were investigated. The optimum parameters of water-soluble chitosan on the corrosion inhibition performance of 2205 duplex stainless steel were also determined. The water-soluble chitosan showed excellent corrosion inhibition performance on the 2205 duplex stainless steel. Polarization curves demonstrated that chitosan acted as a mixed-type inhibitor. When the stainless steel specimen was immersed in the 0.2 g/L chitosan solution for 4 h, a dense and uniform adsorption film covered the sample surface and the inhibition efficiency(IE) reached its maximum value. Moreover, temperature was found to strongly influence the corrosion inhibition of chitosan; the inhibition efficiency gradually decreased with increasing temperature. The 2205 duplex stainless steel specimen immersed in 0.4 g/L water-soluble chitosan at 30°C displayed the best corrosion inhibition among the investigated specimens. Moreover, chitosan decreased the corrosion rate of the 2205 duplex stainless steel in an FeCl_3 solution.展开更多
3Y-TZP/3wt%Al_(2)O_(3) powder was coated with varying amounts of BN using the urea and borate reaction sintering method,and then multiphase ceramics were prepared by hot pressing sintering.The micro-topography and the...3Y-TZP/3wt%Al_(2)O_(3) powder was coated with varying amounts of BN using the urea and borate reaction sintering method,and then multiphase ceramics were prepared by hot pressing sintering.The micro-topography and the compositional analysis of synthesized ceramics were conducted through scanning electron microscopy,transmission electron microscopy and X-ray diffraction.A mechanical tester was used to analyze the Vickers hardness,fracture toughness,and bending strength of the synthesized ceramics.The results showed that the ceramic with a BN content of 12wt%showed the best processability,but had diminished mechanical properties(such as fracture toughness and bending strength).The ceramic with a BN content of 9wt%showed better processability than those with 3wt%and 6wt%BN.However,the fracture toughness was affected by the addition of 9wt%BN,making this ceramic only usable as a base material for a three-unit fixed bridge.In contrast,the ceramics with a BN content of 3wt%or 6wt%fulfilled the criteria for use in multi-unit restoration,but their low processability made them unsuitable for milling after sintering.展开更多
基金financially supported by the National Natural Science Foundation of China (No. 81371183)
文摘The effects of chitosan inhibitor on the corrosion behavior of 2205 duplex stainless steel were studied by electrochemical measurements, immersion tests, and stereology microscopy. The influences of immersion time, temperature, and chitosan concentration on the corrosion inhibition performance of chitosan were investigated. The optimum parameters of water-soluble chitosan on the corrosion inhibition performance of 2205 duplex stainless steel were also determined. The water-soluble chitosan showed excellent corrosion inhibition performance on the 2205 duplex stainless steel. Polarization curves demonstrated that chitosan acted as a mixed-type inhibitor. When the stainless steel specimen was immersed in the 0.2 g/L chitosan solution for 4 h, a dense and uniform adsorption film covered the sample surface and the inhibition efficiency(IE) reached its maximum value. Moreover, temperature was found to strongly influence the corrosion inhibition of chitosan; the inhibition efficiency gradually decreased with increasing temperature. The 2205 duplex stainless steel specimen immersed in 0.4 g/L water-soluble chitosan at 30°C displayed the best corrosion inhibition among the investigated specimens. Moreover, chitosan decreased the corrosion rate of the 2205 duplex stainless steel in an FeCl_3 solution.
基金financially supported by the National Natural Science Foundation of China(No.81371183).
文摘3Y-TZP/3wt%Al_(2)O_(3) powder was coated with varying amounts of BN using the urea and borate reaction sintering method,and then multiphase ceramics were prepared by hot pressing sintering.The micro-topography and the compositional analysis of synthesized ceramics were conducted through scanning electron microscopy,transmission electron microscopy and X-ray diffraction.A mechanical tester was used to analyze the Vickers hardness,fracture toughness,and bending strength of the synthesized ceramics.The results showed that the ceramic with a BN content of 12wt%showed the best processability,but had diminished mechanical properties(such as fracture toughness and bending strength).The ceramic with a BN content of 9wt%showed better processability than those with 3wt%and 6wt%BN.However,the fracture toughness was affected by the addition of 9wt%BN,making this ceramic only usable as a base material for a three-unit fixed bridge.In contrast,the ceramics with a BN content of 3wt%or 6wt%fulfilled the criteria for use in multi-unit restoration,but their low processability made them unsuitable for milling after sintering.
