The diblock copolymers intercalated layered silicate was prepared via a melt dispersion technique. Then the effect of intercalated hybrid as filler on acrylonitrile- butadiene-styrene resin was characterized by X-ray ...The diblock copolymers intercalated layered silicate was prepared via a melt dispersion technique. Then the effect of intercalated hybrid as filler on acrylonitrile- butadiene-styrene resin was characterized by X-ray diffraction, transmission electron microscopy, stress-strain measurements in elongation.展开更多
In this work, DSC and SEM studies indicate that ion-ligand interaction can be utilized to enhance the interaction of poly (styrene-block-2-vinyl pyridine)[P (S-b-2VP)] and polyethylene based ionomer (Surlyn). The comp...In this work, DSC and SEM studies indicate that ion-ligand interaction can be utilized to enhance the interaction of poly (styrene-block-2-vinyl pyridine)[P (S-b-2VP)] and polyethylene based ionomer (Surlyn). The compatibility for this blending system can be improved by this special interaction and 20/80 wt is the optimum blending composition with good compatibility. FTIR results further certify that strong interactions exist in the blending system.展开更多
The semibatch emulsifier-free emulsion copolymerization of methyl methacrylate(MMA and butyl acrylate (BA) in the presence of 2-hydroxyethyl methacrylate (HEMA)initiated by K2S2O8 (PSP) was studied. The latex particle...The semibatch emulsifier-free emulsion copolymerization of methyl methacrylate(MMA and butyl acrylate (BA) in the presence of 2-hydroxyethyl methacrylate (HEMA)initiated by K2S2O8 (PSP) was studied. The latex particles can maintain an appreciablestability during the emulsifier-free emulsion copolymerization of MMA and BA in thepresence of HEMA The average particle diameter increase with an increase of totalsolids content, HEMA content, PSP content, ioniC strength of the system and monomerfeed rate, and decrease with the monomer feed ratio From 3/1(MMA/BA;molar ratio.)to1/3. The stability of this reaction system is improved by adding HEMA as nonioniccomonomer High solids content (50%) latex with monodisperse particle can beobtained using this process.展开更多
In this article, AHPS (3 - allyloxy- 2 -hydrory- 1 -Propanesulfonate salt) wassynthesized to use in emulsifier-Ne emulsion polymerization of BA/BMa/MMA systemfor high solid content latexes. Storage stability klow beha...In this article, AHPS (3 - allyloxy- 2 -hydrory- 1 -Propanesulfonate salt) wassynthesized to use in emulsifier-Ne emulsion polymerization of BA/BMa/MMA systemfor high solid content latexes. Storage stability klow behavior of the latexes,morphology of the obtained latex particles, dynamic viscoelastic behavior, tensilestrength and water resistance properties of the resulted copolymers were investigated.The experimental results show that with the addition of AHPS, stability of the emulsionis greatly improved that there appears no apparent precipitation dunring thepolymerization and storage at room temperature for 6 months and at -10℃ for fourmonths. Flow of the latexes follows the Bingham body laws, diameter of the latexparticles is about 0.6μn, of which is larger than that of by conventional emulsionpolymerization(0.12μm). In addition, not only water resistance of the copolymersobtained by emulsifier-free emulsion polymerization is greatly improved, but alsotensile strength is obviously enhanced.展开更多
Well - defined diblock copolymers Of styrene (St ) and ethylene oxide (EO )have been prepared by sequential living anionic polymerization of the twocomonomers in THF. Diphenyl methyl potassium has been used as initiat...Well - defined diblock copolymers Of styrene (St ) and ethylene oxide (EO )have been prepared by sequential living anionic polymerization of the twocomonomers in THF. Diphenyl methyl potassium has been used as initiator. Theblock copolymers were characterized in detail by methods Of size exclusion chromatography (SEC ) , 1H - Nab, FT - IR, dynamic mechanical analysis(Daal ) and WAXD.展开更多
基金Chinese Education Ministry Foundation for Nankai University and Tianjin University Joint Academy
文摘The diblock copolymers intercalated layered silicate was prepared via a melt dispersion technique. Then the effect of intercalated hybrid as filler on acrylonitrile- butadiene-styrene resin was characterized by X-ray diffraction, transmission electron microscopy, stress-strain measurements in elongation.
文摘In this work, DSC and SEM studies indicate that ion-ligand interaction can be utilized to enhance the interaction of poly (styrene-block-2-vinyl pyridine)[P (S-b-2VP)] and polyethylene based ionomer (Surlyn). The compatibility for this blending system can be improved by this special interaction and 20/80 wt is the optimum blending composition with good compatibility. FTIR results further certify that strong interactions exist in the blending system.
文摘The semibatch emulsifier-free emulsion copolymerization of methyl methacrylate(MMA and butyl acrylate (BA) in the presence of 2-hydroxyethyl methacrylate (HEMA)initiated by K2S2O8 (PSP) was studied. The latex particles can maintain an appreciablestability during the emulsifier-free emulsion copolymerization of MMA and BA in thepresence of HEMA The average particle diameter increase with an increase of totalsolids content, HEMA content, PSP content, ioniC strength of the system and monomerfeed rate, and decrease with the monomer feed ratio From 3/1(MMA/BA;molar ratio.)to1/3. The stability of this reaction system is improved by adding HEMA as nonioniccomonomer High solids content (50%) latex with monodisperse particle can beobtained using this process.
文摘In this article, AHPS (3 - allyloxy- 2 -hydrory- 1 -Propanesulfonate salt) wassynthesized to use in emulsifier-Ne emulsion polymerization of BA/BMa/MMA systemfor high solid content latexes. Storage stability klow behavior of the latexes,morphology of the obtained latex particles, dynamic viscoelastic behavior, tensilestrength and water resistance properties of the resulted copolymers were investigated.The experimental results show that with the addition of AHPS, stability of the emulsionis greatly improved that there appears no apparent precipitation dunring thepolymerization and storage at room temperature for 6 months and at -10℃ for fourmonths. Flow of the latexes follows the Bingham body laws, diameter of the latexparticles is about 0.6μn, of which is larger than that of by conventional emulsionpolymerization(0.12μm). In addition, not only water resistance of the copolymersobtained by emulsifier-free emulsion polymerization is greatly improved, but alsotensile strength is obviously enhanced.
文摘Well - defined diblock copolymers Of styrene (St ) and ethylene oxide (EO )have been prepared by sequential living anionic polymerization of the twocomonomers in THF. Diphenyl methyl potassium has been used as initiator. Theblock copolymers were characterized in detail by methods Of size exclusion chromatography (SEC ) , 1H - Nab, FT - IR, dynamic mechanical analysis(Daal ) and WAXD.
