Optimization of Phosphate Adsorption Using Activated Carbon Derived from Pangium edule Shell

This study investigated the efficiency of activated carbon from Pangium edule shells for removing phosphate from aqueous solution.The adsorption capacity of the synthesized activated carbon was determined to be 19.8392 mg g−1.Various isotherm models were used to analyze the adsorption process,Henry,Freundlich,SIP,and Halsey isotherm fitting showed r2 values close to 1.0.These isotherms indicated a combination of physisorption and chemisorption mechanisms,with heterogeneity and multilayer formation playing important roles.A pseudo-second-order model described the adsorption kinetics well,suggesting chemisorption as the dominant mechanism with an r2 value of 1.0 and a rate constant k_(2) of 1.2550 min^(-1).The optimization was carried out using central composite design(CCD)using 3 factors(contact time(minutes),adsorbent dosage(mg),and initial phosphate concentration(ppm))with 3 levels.The CCD output was analyzed using response surface methodology(RSM)to obtain the optimum level of each factor.A contact time of one to two hours and an adsorbent dosage of more than 80 mg was recommended.Optimal removal was achieved at initial phosphate concentrations between 800 and 1150 ppm.Morphological analysis using scanning electron microscope(SEM)showed a highly irregular surface structure of activated carbon,while X-ray Diffraction(XRD)patterns indicated the presence of amorphous carbon.Fourier Transform Infrared(FTIR)analysis identified functional groups contributing to the adsorption process and Energy Dispersive X-ray Spectroscopy(EDX)analysis confirmed the presence of phosphate on the carbon surface after adsorption.In conclusion,activated carbon from P.edule shells has significant potential in phosphate removal,with a combination of high adsorption capacity,effective adsorption mechanism,and favorable kinetics,making it a promising material for water treatment.

Adsorption of Malachite Green Using Activated Carbon from Mangosteen Peel: Optimization Using Box-Behnken Design

In this research,activated carbon from mangosteen peel has been synthesized using sulfuric acid as an activator.The adsorption performance of the activated carbon was optimized using malachite green dye as absorbate.Mala-chite green dye waste is a toxic and non-biodegradable material that damages the environment.Optimization of adsorption processes was carried out using Response Surface Methodology(RSM)with a Box-Behnken Design(BBD).The synthesized activated carbon was characterized using FTIR and SEM instruments.The FTIR spectra confirmed the presence of a sulfonate group(-SO_(3)H)in the activated carbon,indicating that the activation pro-cess using sulfuric acid was successful.SEM characterization shows that activated carbon has porous morphology.Optimization was carried out for three adsorption parameters,namely contact time(20,60,and 120 min),adsor-bent mass(0.005,0.025,and 0.05 g),and initial concentration of malachite green solution(5,50,and 100 mg·L^(-1)).The concentration of the malachite green solution was determined using a UV-Vis spectrophotometer at the max-imum wavelength of malachite green,618 nm.The optimum of malachite green adsorption using mangosteen peel activated carbon was obtained at a contact time of 80 min,an adsorbent mass of 0.032 g,and malachite green initial concentration of 25 mg·L^(-1),with a maximum removal percentage and maximum adsorption capacity of 93.66%and 19.345 mg·g^(-1),respectively.

The Influence of Tartaric Acid in the Silver Nanoparticle Synthesis Using Response Surface Methodology

Silver nanoparticles(AgNPs)synthesized using tartaric acid as a capping agent have a great impact on the reaction kinetics and contribute significantly to the stability of AgNPs.The protective layer formed by tartaric acid is an important factor that protects the silver surface and reduces potential cytotoxicity problems.These attributes are critical for assessing the compatibility of AgNPs with biological systems and making them suitable for drug delivery applications.The aim of this research is to conduct a comprehensive study of the effect of tartaric acid concentration,sonication time and temperature on the formation of silver nanoparticles.Using Response Surface Methodology(RSM)with Face-Centered Central Composite Design(FCCD),the optimization process identifies the most favorable synthesis conditions.UV-Vis spectrum regression analysis shows that AgNPs stabilized with tartaric acid are more stable than AgNPs without tartaric acid.This highlights the increased stability that tartaric acid provides in AgNP ssssynthesis.Particle size distribution analysis showed a multimodal distribution for AgNPs with tartaric acid and showed the smallest size peak with an average size of 20.53 nm.The second peak with increasing intensity shows a dominant average size of 108.8 nm accompanied by one standard deviation of 4.225 nm and a zeta potential of−11.08 mV.In contrast,AgNPs synthesized with polyvinylpyrrolidone(PVP)showed a unimodal particle distribution with an average particle size of 81.62 nm and a zeta potential of−2.96 mV.The more negative zeta potential of AgNP-tartaric acid indicates its increased stability.Evaluation of antibacterial activity showed that AgNPs stabilized with tartaric acid showed better performance against E.coli and B.subtilis bacteria compared with AgNPs-PVP.In summary,this study highlights the potential of tartaric acid in AgNP synthesis and suggests an avenue for the development of stable AgNPs with versatile applications.

The Adsorption of Pb(II)Using Silica Gel Synthesized from Chemical Bottle Waste:Optimization Using Box-Behnken Design

The adsorption of Pb(II)on silica gel synthesized from chemical glass bottle waste has been studied.The effect of independent variables(adsorbent dose,initial concentration of Pb(II),contact time,and pH)on the Pb(II)removal from water was evaluated and optimized using the Response Surface Methodology(RSM).Under optimized conditions(adsorbent dose:20 mg;contact time:30 min;initial Pb(II)concentration:120 mg.L^(−1);and pH:8),the removal of Pb(II)was 99.77%.The adsorption equilibrium data obtained from the batch experiment were investigated using different isotherm models.The Langmuir isotherm model fits the experimental data.This shows that the surface of the silica gel synthesized from chemical bottles waste was covered by a Pb(II)monolayer.XRF analysis showed that the synthesized silica gel had a SiO_(2) content of 75.63%.Amorphous silica was observed from XRD analysis.SEM-EDX characterization showed that Pb was adsorbed on the silica gel surface.SEM analysis showed that silica gel has irregular particles with a surface area of 297.08 m2.g^(−1) with a pore radius of 15.74 nm calculated from BET analysis.

Silica Gel from Chemical Glass Bottle Waste as Adsorbent for Methylene Blue:Optimization Using BBD

This research focuses on the effective removal of methylene blue dye using silica gel synthesized from chemical glass bottle waste as an environmentally friendly and cost-effective adsorbent.The adsorption process was optimized using Box-Behnken Design(BBD)and Response Surface Methodology(RSM)to investigate the influence of pH(6;8 and 10),contact time(15;30 and 45 min),adsorbent mass(30;50 and 70 mg),and initial concentration(20;50 and 80 mg/L)of the adsorbate on the adsorption efficiency.The BBD was conducted using Google Colaboratory software,which encompassed 27 experiments with randomly assigned combinations.The silica gel synthesized from chemical glass bottle was characterized by XRD,FTIR,SEM-EDX and TEM.The adsorption result was measured by spectrophotometer UV-Vis.The optimized conditions resulted in a remarkable methylene blue removal efficiency of 99.41%.Characterization of the silica gel demonstrated amorphous morphology and prominent absorption bands characteristic of silica.The Langmuir isotherm model best described the adsorption behavior,revealing chemisorption with a monolayer coverage of methylene blue on the adsorbent surface,and a maximum adsorption capacity of 82.02 mg/g.Additionally,the pseudo-second-order kinetics model indicated a chemisorption mechanism during the adsorption process.The findings highlight the potential of silica gel from chemical glass bottle waste as a promising adsorbent for wastewater treatment,offering economic and environmental benefits.Further investigations can explore its scalability,regenerability,and reusability for industrial-scale applications.

Malachite Green Adsorption Using Carbon-Based and Non-Conventional Adsorbent Made from Biowaste and Biomass:A Review

Dyes are pervasive contaminants in wastewater,posing significant health risks to both humans and animals.Among the various methods employed for effective dye removal,adsorption has emerged as a highly promising approach due to its notable advantages,including high efficiency,cost-effectiveness,low energy consumption,and operational simplicity compared to alternative treatments.This comprehensive review focuses on investigating adsorbents derived from biowastes and biomass,specifically carbon-based and non-conventional adsorbents,for the removal of malachite green,a widely used dye known for its toxic and carcinogenic properties.Carbon-based adsorbents encompass two main types:activated carbon and biochar,while non-conventional adsorbents refer to powder sorbents without carbonaceous treatments.Extensive studies have reported remarkable findings,with achieved maximum removal percentages exceeding 98%and capacities reaching 250 mg/g.These results highlight the exceptional efficacy of the reviewed adsorbents in eliminating malachite green from wastewater.By exploring the potential of bio-based adsorbents,this review sheds light on sustainable and environmentally friendly solutions for mitigating dye pollution.

Synthesis of Water-Soluble Chitosan From Squid Pens Waste for Capsule Shell Materials

Water-Soluble Chitosan(WSC)has been sucessfuly synthesized from squid pens waste.The synthesis of chitosan from chitin was carried out by optimization of deacetylation temperature and time.Chitin was obtained from squid pens waste by demineralization and deproteinization process.HCl 7%was used for demineralization and NaOH 10%at 60℃ was applied for deproteinization process.Deacetylation reaction was carried out at varied temperatures i.e.,60℃,70℃,80℃,90℃ and 100℃ in NaOH 50%solution for 10 hours.Deacetylation reaction time were varied for 2 hours,4 hours,6 hours,8 hours,and 10 hours.The crude chitosan obtained then reacted with H2O230%to depolymerize.The synthesis product obtained then characterized by FTIR.The result of squid chitin yield was 33.9%.The optimum temperature and time of chitosan deacetylation process were 90℃ for 8 hours as indicated by the value of deacetylation degree(DD)that equal to 83.94%at optimum temperature and 82.22%at optimum reaction time.The percentage of WSC yield at optimum temperature(90℃)and optimum time(8 hours)were 27.59%and 23.16%,respectively.WSC solubility test was done in water and HCl 0,1N.The solubility of 2.8325 mg/mL and 0.8125 mg/mL were obtained in acid medium and water medium,respectively.

The Fabrication of Water-Soluble Chitosan Capsule Shell Modified by Alginate and Gembili Starch(Dioscorea esculenta L)

Capsule shells have been successfully fabricated from water-soluble chitosan(WSC)with the addition of alginate and Gembili starch.WSC was synthesized from crab shell chitosan by depolymerization reaction.The capsule shells were made with the composition of WSC:Alginate,2:1,3:1 and 4:1(w/w)with and without the addition of Gembili starch.Gembili starch was added with a ratio of Alginate:Starch,1:1(w/w).The capsule shell properties were evaluated according to Indonesian Pharmacopoeia standard.The solubility test showed that the capsule shells were comply with the standard.The highest degrees of swelling in water and HCl 0.1 N solution were 491.93%and 410.51%,respectively.The highest degradation percentages in water and HCl 0.1 N solution were 57.80%and 21.44%,respectively.The observation of physical appearance indicated that the capsule shell with WSC:Alginate:Starch in ratio of 3:1:1 has appearance close to commercial capsule shell.