NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.

The protein tyrosine kinase inhibitor, genistein, decreases the excitability of capsaicin-sensitive neurons

AIM : One of the primary mechanisms by which neurons regulate their excitability is through of ion channel phosphorylafion. Compounds that increase noeiceptor excitability can cause hyporalgesia or allodynia whereas compounds that decrease noeiceptor excitability can be used as analgesics to relieve pain arising from inflammation or trauma. METHODS:

Voltage-Gated Ion Channels in Nociceptors： Modulation by the cGMP-PKG pathway

AIM: Nociceptors contain a variety of ion channels that are modulated by proinflammatory mediators that may arise from tissue or nerve injury. The changes in activity of these channels, which primarily occurs through changes in intracellular pathways, may lead to the pathological states of hyperalgesia and allodynia. METHODS &RESULTS:

MICROSTRUCTURAL CHARACTERIZATION OF SPIN—VALVE MULTILAYERS BY X—RAY ANOMALYOUS DIFFRACTION TECHNIQUE

It is impossible to directly analyze the microstructure of spin-valve multilayers based on Ni,F,Cu and Mn by a conventional X-ray diffraction technique because the lattice parameter and atomic sattering factor sof them are very close.To solve this problem, we use an x-ray anomalous diffraction technique to characterize the microstructures of the [Ni80Fe20/Fe50Mn50]15 and [Ni80Fe20/Cu]15 superlattice systems.The results show that more diffraction peaks and higher internsity in the reflectivety profile are observed when the incident energy is close to the absorption edge of the lighter element(Mn) in [Ni80Fe20/Fe50Mn50]15 multilayer systems and to the absorption edge of the heavier element (Cu) in the [Ni80Fe20/Cu]15 multilayer systems.The interface and periodic structure of [Ni80F20/Fe50Mn50]15 are more perfect than that of the [Ni80Fe20/Cu]15 superlattices.The above results are disussed in this paper.

Amplitude analysis of the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)

Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η).The fit fractions of individual components are obtained,and large interferences among the dominant components of the decays D^(0)→a_(1)(1260)π,D^(0)→π(1300)π,D^(0)→ρ(770)ρ(770),and D^(0)→2(ππ)_(S)are observed in both channels.With the obtained amplitude model,the CP-even fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are determined to be(75.2±1.1_(stat).±1.5_(syst.))%and(68.9±1.5_(stat).±2.4_(syst.))%,respectively.The branching fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are measured to be(0.688±0.010_(stat.)±0.010_(syst.))%and(0.951±0.025_(stat.)±0.021_(syst.))%,respectively.The amplitude analysis provides an important model for the binning strategy in measuring the strong phase parameters of D^(0)→4πwhen used to determine the CKM angleγ(ϕ_(3))via the B^(−)→DK^(−)decay.

Measurement of integrated luminosity of data collected at 3.773 GeV by BESIII from 2021 to 2024

We present a measurement of the integrated luminosity of e^(+)e^(-)collision data collected by the BESIII detector at the BEPCII collider at a center-of-mass energy of Ecm=3.773 GeV.The integrated luminosities of the datasets taken from December 2021 to June 2022,from November 2022 to June 2023,and from October 2023 to February 2024 were determined to be 4.995±0.019 fb^(-1),8.157±0.031 fb^(-1),and 4.191±0.016 fb^(-1),respectively,by analyzing large angle Bhabha scattering events.The uncertainties are dominated by systematic effects,and the statistical uncertainties are negligible.Our results provide essential input for future analyses and precision measurements.

Influences of residual stress and micro-deformation on microstructures and mechanical properties for Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy produced by laser powder bed fusion

Laser powder bed fusion(LPBF)yields unique advantages during the fabrication of titanium alloys.In the present work,Ti-6.5 Al-3.5 Mo-1.5 Zr-0.3 Si alloy specimens with excellent mechanical performances were fabricated by LPBF.The as-built specimens displayed relatively high strength and ductility under modest volume energy densities(VEDs),whereas they manifested high strength with low ductility under high VEDs.To investigate the key reason of this phenomenon,the specimens were designed with two VEDs ranges of 60 J/mm^(3) and 85 J/mm^(3).Special attention was paid to the influences of residual stress and micro-deformation on microstructures and mechanical properties for the first time.The results indicated that the residual stresses and relative density of the 60 J/mm^(3) range specimens were higher than that of the 85 J/mm3 range specimens.Dislocation multiplication and dislocation movement promoted by the residual stress were hindered by the initialα’phase grain boundary(prior-α’GB),leading to the formation ofα’metastable structures.The mean tensile strength and elongation of the 60 J/mm^(3) range specimens were 1248.1 MPa and 12.3%,respectively,whereas the corresponding values for the 85 J/mm^(3) range specimens were 1405.3 MPa,5.0%,respectively.During deformation,the strength and ductility of the specimens were first improved by lamellar structures generated from prior-α’phases,and then effectively enhanced by the interaction between the{10–12}twins and dislocations.However,pores significantly reduced the ductility;hence,high VED specimens with large twins and numerous large pores increased the strength and reduce the ductility.

Enhanced helium ion irradiation tolerance in a Fe-Co-Ni-Cr-Al-Ti high-entropy alloy with L12 nanoparticles

L12-strengthened high entropy alloys(HEAs)with excellent room and high-temperature mechanical prop-erties have been proposed as promising candidates as structural materials for advanced nuclear systems.However,knowledge about their radiation response is fairly limited.In the present work,a novel HEA with a high density of L12 nanoparticles was irradiated with He ion at 500°C.Transmission electron microscope(TEM)and atom probe tomography(APT)were employed to study the evolution of mi-crostructural stability and radiation-induced segregation.Similar to the single-phase FeCoNiCr HEA,the main microstructural features were numerous large faulted dislocation loops and helium bubbles.While the irradiation resistance of the present L12-strengthened HEA is much improved in terms of reduced bubble size,which could be attributed to the considerable He trapping efficiency of the coherent pre-cipitate/matrix interface and the enhanced capability of the interface for damage elimination when the matrix channel width is narrow.APT analysis revealed that an inverse-Kirkendall-mechanism-dominated radiation-induced segregation(RIS)occurs around bubbles,where a significant Co enrichment and Ni de-pletion can be clearly observed.In addition,the competing dynamics of ballistic mixing and elemental clustering that raised from the irradiation-enhanced diffusion in a highly supersaturated matrix,along with the low precipitation nucleation barrier due to the small lattice misfit,lead to a dynamical pre-cipitation dissolution and re-precipitation appears under irradiation.Such a promising phenomenon is expected to promote a potential self-healing effect and could in turn provide a sustainable irradiation tolerance over the operational lifetime of a reactor.

Thermal stability and deformation mechanisms in Ni-Co-Fe-Cr-Al-Ti-Nb-type nanoparticle-strengthened high-entropy alloys

The precipitate morphologies,coarsening kinetics,elemental partitioning behaviors,grain structures,and tensile properties were explored in detail for L1_(2)-strengthened Ni_(39.9)Co_(20)Fe_(15)Cr_(15)Al_(6)Ti_(4-x)Nb_(x)B_(0.1)(x=0 at.%,2 at.%,and 4 at.%)high-entropy alloys(HEAs).By substituting Ti with Nb,the spheroidal-to-cuboidal precipitate morphological transition,increase in the coarsening kinetics,and phase decomposition upon aging at 800°C occurred.The excessive addition of Nb brings about the grain boundary precipitation of an Nb-rich phase along with the phase decomposition from the L1_(2)to lamellar-structured D019 phase upon the long-term aging duration.By partially substituting Ti with Nb,the chemically complex and thermally stable L12 phase with a composition of(Ni_(58.8)Co_(9.8)Fe_(2.7))(Al_(12.7)Ti_(5.8)Nb_(7.5)Cr_(2.3))ensures the stable phase structure and clean grain boundaries,which guarantees the superb high-temperature mechanical properties(791±7 MPa for yielding and 1013±11 MPa for failure)at 700℃.Stacking faults(SFs)were observed to prevail during the plastic deformation,offering a high work-hardening capability at 700°C.An anomalous rise in the yield strength at 800℃was found,which could be ascribed to the multi-layered super-partial dislocations with a cross-slip configuration within the L1_(2)particles.